In this work, a hybrid finite element formulation is presented to predict the flutter boundaries of circular cylindrical shells made of functionally graded (FG) materials. The development is based on a combination of linear Sanders thin shell theory and the classic finite element method. Material properties are temperature dependent and graded in the shell thickness direction according to a simple power law distribution in terms of volume fractions of constituents. The temperature field is assumed to be uniform over the shell surface and along the shell thickness. First-order piston theory is applied to account for supersonic aerodynamic pressure. The effects of temperature rise and shell internal pressure on the flutter boundaries of a FG circular cylindrical shell for different values of power law index are investigated. The present study shows efficient and reliable results that can be applied to aeroelastic design and analysis of shells of revolution in aerospace vehicles.
Skip Nav Destination
Article navigation
February 2014
Research-Article
Efficient Hybrid Finite Element Method for Flutter Prediction of Functionally Graded Cylindrical Shells
Farhad Sabri,
Farhad Sabri
Postdoctoral Fellow
Department of Mechanical and
Industrial Engineering,
e-mail: sabri@mie.utoronto.ca
Department of Mechanical and
Industrial Engineering,
University of Toronto
,Toronto M5S 3G8
, Canada
e-mail: sabri@mie.utoronto.ca
Search for other works by this author on:
Aouni A. Lakis
Aouni A. Lakis
1
Professor
Applied Mechanics Section,
Department of Mechanical Engineering,
e-mail: aouni.lakis@polymtl.ca
Applied Mechanics Section,
Department of Mechanical Engineering,
Ecole Polytechnique de Montreal
,Montreal H3T 1J4
, Canada
e-mail: aouni.lakis@polymtl.ca
1Corresponding author.
Search for other works by this author on:
Farhad Sabri
Postdoctoral Fellow
Department of Mechanical and
Industrial Engineering,
e-mail: sabri@mie.utoronto.ca
Department of Mechanical and
Industrial Engineering,
University of Toronto
,Toronto M5S 3G8
, Canada
e-mail: sabri@mie.utoronto.ca
Aouni A. Lakis
Professor
Applied Mechanics Section,
Department of Mechanical Engineering,
e-mail: aouni.lakis@polymtl.ca
Applied Mechanics Section,
Department of Mechanical Engineering,
Ecole Polytechnique de Montreal
,Montreal H3T 1J4
, Canada
e-mail: aouni.lakis@polymtl.ca
1Corresponding author.
Contributed by the Design Engineering Division of ASME for publication in the JOURNAL OF VIBRATION AND ACOUSTICS. Manuscript received December 2, 2010; final manuscript received July 15, 2013; published online September 27, 2013. Assoc. Editor: Bogdan Epureanu.
J. Vib. Acoust. Feb 2014, 136(1): 011002 (6 pages)
Published Online: September 27, 2013
Article history
Received:
December 2, 2010
Revision Received:
July 15, 2013
Citation
Sabri, F., and Lakis, A. A. (September 27, 2013). "Efficient Hybrid Finite Element Method for Flutter Prediction of Functionally Graded Cylindrical Shells." ASME. J. Vib. Acoust. February 2014; 136(1): 011002. https://doi.org/10.1115/1.4025397
Download citation file:
Get Email Alerts
Cited By
Topology Optimization and Wave Propagation of Three-Dimensional Phononic Crystals
J. Vib. Acoust (February 2023)
Vibration of Complex Euler–Bernoulli and Timoshenko–Ehrenfest Beams Through Affine GPSFs
J. Vib. Acoust (December 2022)
Satellite Vibration Isolation Using Periodic Acoustic Black Hole Structures With Ultrawide Bandgap
J. Vib. Acoust (February 2023)
Free Vibration of Timoshenko–Ehrenfest Beams and Frameworks Using Frequency-Dependent Mass and Stiffness Matrices
J. Vib. Acoust (December 2022)
Related Articles
Natural Vibration of Functionally Graded Cylindrical Shells With Infinite and Finite Lengths
J. Vib. Acoust (February,2012)
Designing Optimal Volume Fractions For Functionally Graded Materials With Temperature-Dependent Material Properties
J. Appl. Mech (September,2007)
A Comparison of Post-buckling Behavior for FGM Cylindrical Shells With Piezoelectric Fiber Reinforced Composite Actuators
J. Eng. Mater. Technol (July,2009)
Use of Functionally Graded Material Layers in a Two-Layered Pressure Vessel
J. Pressure Vessel Technol (October,2011)
Related Proceedings Papers
Related Chapters
Comparing Exchanger Types
Heat Exchanger Engineering Techniques
Members in Bending
Design & Analysis of ASME Boiler and Pressure Vessel Components in the Creep Range
Openings
Guidebook for the Design of ASME Section VIII Pressure Vessels