To investigate the effect of oil film force on a geared rotor system, a short journal bearing model was applied to represent nonlinear oil film force. A dynamic model of the geared rotor oil journal bearing system was presented. The nonlinear gear mesh force and nonlinear oil film force were considered in the model. The nonlinear dynamic responses of the system were investigated by numerical integration method. This article shows that when the rotational speed is relatively low, the vibration of the system is mainly affected by nonlinear mesh force. With the increase of rotational speed, the influence of nonlinear oil film force also increases gradually, and the subsynchronous forward precession phenomena appear. When the speed increases to a certain value, the amplitude of the subsynchronous forward precession exceeds the amplitude of the rotational frequency, and the nonlinear mesh force is greatly affected by the nonlinear oil film force. However, the linear oil film force does not affect the nonlinear mesh force. The subsynchronous forward precession is difficult to be predicted by linear oil film force which was previously applied. This experiment is performed to validate the correctness of the dynamic model presented, and the numerical integration results of low speeds are validated by the experimental data.
Skip Nav Destination
e-mail: cuiyahuicui@163.com
e-mail: lzs@hit.edu.cn
e-mail: Vibw@qq.com
e-mail: yejianhuai@163.com
Article navigation
August 2012
Research Papers
Nonlinear Dynamic of a Geared Rotor System With Nonlinear Oil Film Force and Nonlinear Mesh Force
Yahui Cui,
e-mail: cuiyahuicui@163.com
Yahui Cui
School of Energy Science and Engineering, Harbin Institute of Technology
, Harbin, 150001, China
Search for other works by this author on:
Zhansheng Liu,
e-mail: lzs@hit.edu.cn
Zhansheng Liu
School of Energy Science and Engineering, Harbin Institute of Technology
, Harbin, 150001, China
Search for other works by this author on:
Yongliang Wang,
e-mail: Vibw@qq.com
Yongliang Wang
School of Energy Science and Engineering, Harbin Institute of Technology
, Harbin, 150001, China
Search for other works by this author on:
Jianhuai Ye
e-mail: yejianhuai@163.com
Jianhuai Ye
School of Energy Science and Engineering, Harbin Institute of Technology
, Harbin, 150001, China
Search for other works by this author on:
Yahui Cui
School of Energy Science and Engineering, Harbin Institute of Technology
, Harbin, 150001, China
e-mail: cuiyahuicui@163.com
Zhansheng Liu
School of Energy Science and Engineering, Harbin Institute of Technology
, Harbin, 150001, China
e-mail: lzs@hit.edu.cn
Yongliang Wang
School of Energy Science and Engineering, Harbin Institute of Technology
, Harbin, 150001, China
e-mail: Vibw@qq.com
Jianhuai Ye
School of Energy Science and Engineering, Harbin Institute of Technology
, Harbin, 150001, China
e-mail: yejianhuai@163.com
J. Vib. Acoust. Aug 2012, 134(4): 041001 (8 pages)
Published Online: May 31, 2012
Article history
Received:
March 7, 2009
Revised:
August 16, 2011
Published:
May 29, 2012
Online:
May 31, 2012
Citation
Cui, Y., Liu, Z., Wang, Y., and Ye, J. (May 31, 2012). "Nonlinear Dynamic of a Geared Rotor System With Nonlinear Oil Film Force and Nonlinear Mesh Force." ASME. J. Vib. Acoust. August 2012; 134(4): 041001. https://doi.org/10.1115/1.4005032
Download citation file:
Get Email Alerts
Numerical Analysis of the Tread Grooves’ Acoustic Resonances for the Investigation of Tire Noise
J. Vib. Acoust (August 2024)
Related Articles
Influence of Clearances and Thermal Effects on the Dynamic Behavior of Gear-Hydrodynamic Journal Bearing Systems
J. Vib. Acoust (December,2013)
Three-Dimensional Dynamic Model of TEHD Tilting-Pad Journal Bearing—Part I: Theoretical Modeling
J. Tribol (October,2015)
Time-Varying Meshing Stiffness Calculation and Vibration Analysis for a 16DOF Dynamic Model With Linear Crack Growth in a Pinion
J. Vib. Acoust (February,2012)
Dynamic Analysis of a Motorized Spindle With Externally Pressurized Air Bearings
J. Vib. Acoust (August,2015)
Related Proceedings Papers
Related Chapters
Introduction and Definitions
Handbook on Stiffness & Damping in Mechanical Design
Summary and Conclusions
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications
Average Shaft Centerline Plots
Fundamentals of Rotating Machinery Diagnostics