The Morton Effect in rotor-bearing systems may lead to an unstable operation. In Part I, the mechanism of the Morton Effect–induced thermal instability in the mid-span rotor systems is studied. First, the equivalent thermal induced imbalance is introduced and its magnitude and directions are assumed, to represent the viscous thermal effect on the rotor systems. Then, the simplified rotor and bearing models are adopted for the derivation of analytical expressions. The results show that there exists a threshold of instability due to the Morton Effect in the mid-span rotors. Based on the assumptions of linear isotopic bearing supports, this threshold speed takes a simple form, which is determined by the support stiffness and the introduced equivalent coefficient of thermal effect, for the rigid or elastic rotors, with the thermal imbalance acting in the same direction as the response displacement. The threshold of instability is also obtained for the system with the thermal imbalance acting perpendicular to the response displacement, where the supporting damping plays a role. For a perspective view of the system stability, a stability map for the damped rigid mid-span rotors with the thermal imbalance having arbitrary phase difference is generated. It shows that the stable operating regions of the system are bounded by two curves of threshold of instability, named the first and second threshold speeds of instability, respectively. The Morton Effect–induced instability thresholds are actually affected by both the magnitude and relative phase of the thermal imbalance. The mechanism of the Morton Effect–induced thermal instability of mid-span rotors supported by linear isotropic bearings can be explained through the fact that the Morton Effect introduces either negative stiffness or negative cross-coupled stiffness. In addition, the Morton Effect also has a comprehensive impact on both the amplitude and phase lag of the steady-state unbalance response. It may shift both curves in a manner dependent on the relative magnitude and direction of the thermal imbalance.
Skip Nav Destination
e-mail: gokirk@vt.edu
Article navigation
December 2011
Research Papers
Morton Effect Induced Synchronous Instability in Mid-Span Rotor–Bearing Systems—Part I: Mechanism Study
Gordon Kirk
Gordon Kirk
Professor
Department of Mechanical Engineering,
e-mail: gokirk@vt.edu
Virginia Polytechnic Institute and State University
, Blacksburg, VA 24061
Search for other works by this author on:
Zenglin Guo
Graduate Research Assistant
Gordon Kirk
Professor
Department of Mechanical Engineering,
Virginia Polytechnic Institute and State University
, Blacksburg, VA 24061e-mail: gokirk@vt.edu
J. Vib. Acoust. Dec 2011, 133(6): 061004 (11 pages)
Published Online: October 4, 2011
Article history
Received:
January 28, 2006
Revised:
March 11, 2011
Online:
October 4, 2011
Published:
October 4, 2011
Citation
Guo, Z., and Kirk, G. (October 4, 2011). "Morton Effect Induced Synchronous Instability in Mid-Span Rotor–Bearing Systems—Part I: Mechanism Study." ASME. J. Vib. Acoust. December 2011; 133(6): 061004. https://doi.org/10.1115/1.4004665
Download citation file:
Get Email Alerts
Cited By
Related Articles
Simplified Morton Effect Analysis for Synchronous Spiral Instability
J. Vib. Acoust (October,2010)
Identification of Squeeze Film Damper Force Coefficients From Multiple-Frequency Noncircular Journal Motions
J. Eng. Gas Turbines Power (April,2010)
A Unified Approach to Analyze Vibration of Axisymmetric Rotating Structures with Flexible Stationary Parts
J. Vib. Acoust (April,2005)
Using Guided Balls to Auto-Balance Rotors
J. Eng. Gas Turbines Power (October,2002)
Related Proceedings Papers
Related Chapters
Average Shaft Centerline Plots
Fundamentals of Rotating Machinery Diagnostics
Summary and Conclusions
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications
Unbalance
Fundamentals of Rotating Machinery Diagnostics