This article shows that the added mass due to fluid-structure interaction significantly affects the vibrational dynamics of cilia-based (vibrating cantilever-type) devices for handling microscale fluid flows. Commonly, the hydrodynamic interaction between the cilia-based actuators and fluid is modeled as a drag force that results in damping of the cilia motion. Our main contribution is to show that such damping effects cannot explain the substantial reduction in the resonant-vibrational frequency of the cilia actuator operating in liquid when compared with the natural frequency of the cilia in air. It is shown that an added-mass approach (that accounts for the inertial loading of the fluid) can explain this reduction in the resonant-vibrational frequency when operating cantilever-type devices in liquids. Additionally, it is shown that the added-mass effect can explain why the cilia-vibration amplitude is not substantially reduced in a liquid by the hydrodynamic drag force. Thus, this article shows the need to model the added-mass effect, both theoretically and by using experimental results.
Skip Nav Destination
e-mail: devasia@u.washington.edu
Article navigation
April 2010
Technical Briefs
Added-Mass Effect in Modeling of Cilia-Based Devices for Microfluidic Systems
J. Kongthon,
J. Kongthon
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
Search for other works by this author on:
B. McKay,
B. McKay
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
Search for other works by this author on:
D. Iamratanakul,
D. Iamratanakul
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
Search for other works by this author on:
K. Oh,
K. Oh
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
Search for other works by this author on:
J.-H. Chung,
J.-H. Chung
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
Search for other works by this author on:
J. Riley,
J. Riley
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
Search for other works by this author on:
S. Devasia
S. Devasia
Department of Mechanical Engineering,
e-mail: devasia@u.washington.edu
University of Washington
, Seattle, WA 98195-2600
Search for other works by this author on:
J. Kongthon
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
B. McKay
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
D. Iamratanakul
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
K. Oh
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
J.-H. Chung
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
J. Riley
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600
S. Devasia
Department of Mechanical Engineering,
University of Washington
, Seattle, WA 98195-2600e-mail: devasia@u.washington.edu
J. Vib. Acoust. Apr 2010, 132(2): 024501 (7 pages)
Published Online: February 12, 2010
Article history
Received:
January 31, 2008
Revised:
November 25, 2009
Online:
February 12, 2010
Published:
February 12, 2010
Citation
Kongthon, J., McKay, B., Iamratanakul, D., Oh, K., Chung, J., Riley, J., and Devasia, S. (February 12, 2010). "Added-Mass Effect in Modeling of Cilia-Based Devices for Microfluidic Systems." ASME. J. Vib. Acoust. April 2010; 132(2): 024501. https://doi.org/10.1115/1.4000766
Download citation file:
Get Email Alerts
Boundary-Element Analysis of the Noise Scattering for Urban Aerial Mobility Vehicles: Solver Development and Assessment
J. Vib. Acoust (October 2024)
Related Articles
Experimental Observation of Inertia-Dominated Squeeze Film Damping in Liquid
J. Fluids Eng (December,2010)
Frequency Response of Cylindrical Resonators in a Viscous Fluid
J. Vib. Acoust (June,2011)
Characteristics of the Flow-Induced Vibration and Forces With 1- and 2-DOF Vibrations and Limiting Solid-to-Fluid Density Ratios
J. Vib. Acoust (August,2010)
Frequency Response of a Viscously Damped Flat Plate
J. Appl. Mech (July,2011)
Related Proceedings Papers
Related Chapters
Vortex-Induced Vibration
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook
Towards Real-Time Optical Measurement of Microbubble Content in Hydrodynamic Test Facilities
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Engineering Design about Electro-Hydraulic Intelligent Control System of Multi Axle Vehicle Suspension
International Conference on Instrumentation, Measurement, Circuits and Systems (ICIMCS 2011)