Laboratory study on the identification of moving vehicle axle loads on a multi-span continuous bridge from the measured bending moment responses is presented. A bridge-vehicle system model was fabricated in the laboratory. The bridge was modeled as a three span continuous beam and the car was modeled as a vehicle model with two-axle loads. A number of strain gauges were adhered to the bottom surface of the beam to measure the bending moment responses. Using measured bending moment responses as an input, the corresponding inverse problem was solved to identify moving loads. The moving forces were identified when considering bending moment responses from all spans of the beam. In order to avoid the lower identification accuracy around the inner supports of continuous bridge and to improve the computation efficiency, the moving force identification from the target (one selected) span of the continuous bridge was studied. The rebuilt responses were reconstructed from the identified loads as a forward problem. To study the accuracy of the method the relative percentage errors were calculated with respect to the measured and the rebuilt bending moment responses. The rebuilt bending moment responses obtained from the identified forces are in good agreement with the measured bending moment responses. This indirectly shows that the method is capable of identifying moving loads on continuous supported bridges.

1.
Chan
,
T. H. T.
, and
O’Connor
,
C.
, 1990, “
Wheel Loads From Highway Bridge Strains—Field Studies
,”
J. Struct. Eng.
0733-9445,
116
, pp.
1751
1771
.
2.
Chan
,
T. H. T.
,
Law
,
S. S.
,
Yung
,
T. H.
, and
Yuan
,
X. R.
, 1999, “
An Interpretive Method for Moving Force Identification
,”
J. Sound Vib.
0022-460X,
219
(
3
), pp.
503
524
.
3.
Law
,
S. S.
,
Chan
,
T. H. T.
, and
Zeng
,
Q. H.
, 1997, “
Moving Force Identification—Time Domain Method
,”
J. Sound Vib.
0022-460X,
201
(
1
), pp.
1
22
.
4.
Law
,
S. S.
,
Chan
,
T. H. T.
, and
Zeng
,
Q. H.
, 1999, “
Moving Force Identification—A Frequency Time Domains Approach
,”
ASME J. Dyn. Syst., Meas., Control
0022-0434,
121
(
3
), pp.
394
401
.
5.
Chan
,
T. H. T.
,
Law
,
S. S.
, and
Yung
,
T. H.
, 2000, “
Moving Force Identification Using an Existing Prestressed Concrete Bridge
,”
Eng. Struct.
0141-0296,
22
(
10
), pp.
1261
1270
.
6.
Zhu
,
X. Q.
, and
Law
,
S. S.
, 2001, “
Orthogonal Function in Moving Loads Identification on a Multi-Span Bridge
,”
J. Sound Vib.
0022-460X,
245
, pp.
239
345
.
7.
Jiang
,
R. J.
,
Au
,
F. T. K.
, and
Cheung
,
Y. K.
, 2004, “
Identification of Vehicles Moving on Continuous Bridges
,”
J. Sound Vib.
0022-460X,
274
(
3–5
), pp.
1045
1063
.
8.
Au
,
F. T. K.
,
Jiang
,
R. J.
, and
Cheung
,
Y. K.
, 2004, “
Parameter Identification of Vehicles Moving on Continuous Bridges
,”
J. Sound Vib.
0022-460X,
269
(
1–2
), pp.
91
111
.
9.
Chan
,
T. H. T.
, and
Ashebo
,
D. B.
, 2006, “
Theoretical Study of Moving Force Identification on Continuous Bridges
,” J. Sound Vib. (in press).
10.
Cebon
,
D.
, 1999,
,
Sweets & Zeitlinger
.
11.
Yu
,
L.
, and
Chan
,
T. H. T.
, 2003, “
Moving Force Identification Based on the Frequency-Time Domain Method
,”
J. Sound Vib.
0022-460X,
261
(
2
), pp.
329
349
.