The flow through a high-bypass ratio fan stage during engine-out conditions is investigated, with the objective of quantifying the internal losses when the rotor is at “windmill.” An analysis of altitude test data at various simulated flight Mach numbers shows that the fan rotational speed scales with the engine mass flow rate. Making use of the known values of the nozzle coefficients, we deduce the stagnation pressure loss of the fan stage, which rises significantly as the mass flow rate increases. In order to better understand this behavior, numerical simulations of the fan stage were carried out. The calculated losses agree well with the test data, and it is found that the bulk of the stagnation pressure loss occurs in the stator. A detailed examination of the flow field reveals that the relative flow leaves the rotor at very nearly the metal angle. Moreover, the rotational speed of the fan is such that the inboard sections of the fan blade add work to the flow, while the outboard sections extract work from it. The overall work is essentially zero so that the absolute swirl angle at the rotor exit is small, causing the stator to operate at a severely negative incidence. A gross separation ensues, and the resulting blockage of the stator passage accelerates the flow to high Mach numbers. The highly separated flow in the vane, together with the mixing of the large wakes behind it are responsible for the high losses in the vane. Based on the simulation results for the flow behavior, a simple physical model to estimate the windmill speed of the rotor is developed and is found to be in good agreement with the test data. The utility of this model is that it enables the development of a procedure to predict the internal drag at engine-out conditions, which is discussed.
Skip Nav Destination
Article navigation
July 2010
Research Papers
Internal Losses and Flow Behavior of a Turbofan Stage at Windmill
Dilip Prasad,
Dilip Prasad
Aerodynamics Division,
Pratt and Whitney Aircraft Engines
, East Hartford, CT 06108
Search for other works by this author on:
Wesley K. Lord
Wesley K. Lord
Aerodynamics Division,
Pratt and Whitney Aircraft Engines
, East Hartford, CT 06108
Search for other works by this author on:
Dilip Prasad
Aerodynamics Division,
Pratt and Whitney Aircraft Engines
, East Hartford, CT 06108
Wesley K. Lord
Aerodynamics Division,
Pratt and Whitney Aircraft Engines
, East Hartford, CT 06108J. Turbomach. Jul 2010, 132(3): 031007 (10 pages)
Published Online: March 25, 2010
Article history
Received:
August 26, 2008
Revised:
September 3, 2008
Online:
March 25, 2010
Published:
March 25, 2010
Citation
Prasad, D., and Lord, W. K. (March 25, 2010). "Internal Losses and Flow Behavior of a Turbofan Stage at Windmill." ASME. J. Turbomach. July 2010; 132(3): 031007. https://doi.org/10.1115/1.3147106
Download citation file:
Get Email Alerts
Related Articles
Preliminary Fan Design
for a Silent Aircraft
J. Turbomach (January,2007)
High-Fidelity Numerical Analysis of Per-Rev-Type Inlet Distortion Transfer in Multistage Fans—Part I: Simulations With Selected Blade Rows
J. Turbomach (October,2010)
Propagation and Decay of Shock Waves in Turbofan Engine Inlets
J. Turbomach (January,2005)
A Study on Transient Performance Characteristics of the Canard Rotor Wing Type Unmanned Aerial Vehicle Propulsion System During Flight Mode Transition
J. Eng. Gas Turbines Power (July,2006)
Related Proceedings Papers
Related Chapters
Fans and Air Handling Systems
Thermal Management of Telecommunications Equipment
A Simple Carburetor
Case Studies in Fluid Mechanics with Sensitivities to Governing Variables
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential