Despite its wide use in meanline analyses, the conventional loss breakdown scheme is based on a number of assumptions that are known to be physically unsatisfactory. One of these assumptions states that the loss generated in the airfoil surface boundary layers is uniform across the span. The loss results at high positive incidence presented in a previous paper (Benner, M. W., Sjolander, S. A., and Moustapha, S. H., 2004, ASME Paper No. GT2004-53786.) indicate that this assumption causes the conventional scheme to produce erroneous values of the secondary loss component. A new empirical prediction method for secondary losses in turbines has been developed, and it is based on a new loss breakdown scheme. In the first part of this two-part paper, the new loss breakdown scheme is presented. Using data from the current authors’ off-design cascade loss measurements, it is shown that the secondary losses obtained with the new scheme produce a trend with incidence that is physically more reasonable. Unlike the conventional loss breakdown scheme, the new scheme requires a correlation for the spanwise penetration depth of the passage vortex separation line at the trailing edge. One such correlation exists (Sharma, O. P., and Butler, T. L., 1987, ASME J. Turbomach., 109, pp. 229–236.); however, it was based on a small database. An improved correlation for penetration distance has been developed from a considerably larger database, and it is detailed in this paper.
Skip Nav Destination
e-mail: michael.benner@nrc-cnrc.gc.ca
Article navigation
April 2006
Technical Papers
An Empirical Prediction Method for Secondary Losses in Turbines—Part I: A New Loss Breakdown Scheme and Penetration Depth Correlation
M. W. Benner,
M. W. Benner
National Research Council of Canada,
e-mail: michael.benner@nrc-cnrc.gc.ca
Institute for Aerospace Research
, Ottawa, ON K1A 0R6, Canada
Search for other works by this author on:
S. A. Sjolander,
S. A. Sjolander
Department of Mechanical and Aerospace Engineering,
Carleton University
, Ottawa, ON K1S 5B6 Canada
Search for other works by this author on:
S. H. Moustapha
S. H. Moustapha
Pratt and Whitney Canada, Ltd.
, Longueuil, PQ, J4G 1A1 Canada
Search for other works by this author on:
M. W. Benner
National Research Council of Canada,
Institute for Aerospace Research
, Ottawa, ON K1A 0R6, Canadae-mail: michael.benner@nrc-cnrc.gc.ca
S. A. Sjolander
Department of Mechanical and Aerospace Engineering,
Carleton University
, Ottawa, ON K1S 5B6 Canada
S. H. Moustapha
Pratt and Whitney Canada, Ltd.
, Longueuil, PQ, J4G 1A1 CanadaJ. Turbomach. Apr 2006, 128(2): 273-280 (8 pages)
Published Online: February 1, 2005
Article history
Received:
October 1, 2004
Revised:
February 1, 2005
Connected Content
Citation
Benner, M. W., Sjolander, S. A., and Moustapha, S. H. (February 1, 2005). "An Empirical Prediction Method for Secondary Losses in Turbines—Part I: A New Loss Breakdown Scheme and Penetration Depth Correlation." ASME. J. Turbomach. April 2006; 128(2): 273–280. https://doi.org/10.1115/1.2162593
Download citation file:
Get Email Alerts
A Digital Engineering Analysis of an Additively-Manufactured Turbine Vane
J. Turbomach (May 2025)
Mode Analysis for the Rotating Aerodynamic Disturbance of a Transonic Fan
J. Turbomach (May 2025)
Effect of Ceramic Matrix Composites on the Thermal Efficiency of a Power Generation Turbine
J. Turbomach (May 2025)
Heat Transfer Enhancement in Pulsating Flows: A Bayesian Approach to Experimental Correlations
J. Turbomach (May 2025)
Related Articles
Separation Control on a Very High Lift Low Pressure Turbine Airfoil Using Pulsed Vortex Generator Jets
J. Turbomach (October,2011)
Investigation of a Novel Secondary Flow Feature in a Turbine Cascade With End Wall Profiling
J. Turbomach (January,2005)
Boundary Layer Influence on the Unsteady Horseshoe Vortex Flow and Surface Heat Transfer
J. Turbomach (January,2009)
Related Proceedings Papers
Related Chapters
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Boundary Layer Analysis
Centrifugal Compressors: A Strategy for Aerodynamic Design and Analysis
Detailed Airfoil Design for Axial-Flow Turbines
Turbine Aerodynamics: Axial-Flow and Radial-Flow Turbine Design and Analysis