Compressor stall is a catastrophic breakdown of the flow in a compressor, which can lead to a loss of engine power, large pressure transients in the inlet/nacelle, and engine flameout. The implementation of active or passive strategies for controlling rotating stall and surge can significantly extend the stable operating range of a compressor without substantially sacrificing performance. It is crucial to identify the dynamic changes occurring in the flow field prior to rotating stall and surge in order to control these events successfully. Generally, pressure transducer measurements are made to capture the transient response of a compressor prior to rotating stall. In this investigation, Digital Particle Imaging Velocimetry (DPIV) is used in conjunction with dynamic pressure transducers to capture transient velocity and pressure measurements simultaneously in the nonstationary flow field during compressor surge. DPIV is an instantaneous, planar measurement technique that is ideally suited for studying transient flow phenomena in high-speed turbomachinery and has been used previously to map the stable operating point flow field in the diffuser of a high-speed centrifugal compressor. Through the acquisition of both DPIV images and transient pressure data, the time evolution of the unsteady flow during surge is revealed.
An Investigation of Surge in a High-Speed Centrifugal Compressor Using Digital PIV
Contributed by the International Gas Turbine Institute for publication in the ASME JOURNAL OF TURBOMACHINERY. Manuscript received by the International Gas Turbine Institute January 2000. Associate Editor: T. H. Okiishi.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Wernet , M. P., Bright, M. M., and Skoch, G. J. (January 1, 2000). "An Investigation of Surge in a High-Speed Centrifugal Compressor Using Digital PIV ." ASME. J. Turbomach. April 2001; 123(2): 418–428. https://doi.org/10.1115/1.1343465
Download citation file:
- Ris (Zotero)
- Reference Manager