An experiment was conducted on a heavily instrumented isolated model compressor rotor to study the unsteady aerodynamic response of the blade row to a controlled pitching oscillation of all blades in an undistorted flow, and to a circumferential inlet flow distortion with nonoscillating blades. To accomplish this, miniature pressure transducers were embedded in the blades and the unsteady pressure time histories were recorded. Both phases of the experiment were performed over a wide range of flow coefficient, from Cx/Um = 0.6 to 0.95 in 0.05 steps, and data were taken at each condition for sinusoidal disturbances characterized by one, two, and four per revolution waves. Steady-state data were acquired for flow coefficients from 0.55 to 0.99 in 0.05 steps. In this paper the steady and unsteady results of the portion of this experiment dealing with oscillating blades are compared with analytical predictions, and the steady results are compared with experimental data from previous work. Although the model blades were instrumented at five spanwise stations, only the midspan measurements will be presented herein. The measured pressures for nonoscillating blades were in good agreement with the steady potential flow predictions (and with previous steady experimental data) when the measured exit angle was imposed as the downstream boundary condition for the analysis. It was found that a quasi-steady approach yielded marginally acceptable agreement with the experimental results for the lowest frequency tested. For the higher reduced frequencies, the experimental data could not be modeled in this manner. In contrast, a comparison of the measurements with the Verdon–Caspar unsteady potential flow theory produced generally good agreement except near the leading edge at high mean incidence (i.e., at low flow coefficient). At high incidence the blades in this experiment had very high steady pressure gradients near the leading edge and it is suspected that this may be responsible for the lack of agreement. The agreement was somewhat better at the higher frequencies.
Skip Nav Destination
Article navigation
October 1987
Research Papers
Unsteady Aerodynamic Measurements on a Rotating Compressor Blade Row at Low Mach Number
L. W. Hardin,
L. W. Hardin
United Technologies Research Center, East Hartford, CT 06108
Search for other works by this author on:
F. O. Carta,
F. O. Carta
Aerodynamics, United Technologies Research Center, East Hartford, CT 06108
Search for other works by this author on:
J. M. Verdon
J. M. Verdon
United Technologies Research Center, East Hartford, CT 06108
Search for other works by this author on:
L. W. Hardin
United Technologies Research Center, East Hartford, CT 06108
F. O. Carta
Aerodynamics, United Technologies Research Center, East Hartford, CT 06108
J. M. Verdon
United Technologies Research Center, East Hartford, CT 06108
J. Turbomach. Oct 1987, 109(4): 499-507 (9 pages)
Published Online: October 1, 1987
Article history
Received:
February 19, 1987
Online:
November 9, 2009
Citation
Hardin, L. W., Carta, F. O., and Verdon, J. M. (October 1, 1987). "Unsteady Aerodynamic Measurements on a Rotating Compressor Blade Row at Low Mach Number." ASME. J. Turbomach. October 1987; 109(4): 499–507. https://doi.org/10.1115/1.3262139
Download citation file:
Get Email Alerts
Cited By
Related Articles
Experimental Investigation of the Effects of a Moving Shock Wave on Compressor Stator Flow
J. Turbomach (January,2007)
Investigation of Blade Tip Interaction With Casing Treatment in a Transonic Compressor—Part II: Numerical Results
J. Turbomach (January,2011)
A Navier–Stokes Analysis of the Stall Flutter Characteristics of the Buffum Cascade
J. Turbomach (October,2000)
Influence of Flow Coefficient, Stagger Angle, and Tip Clearance on Tip Vortex in Axial Compressors
J. Fluids Eng (November,2006)
Related Proceedings Papers
Related Chapters
Boundary Layer Analysis
Centrifugal Compressors: A Strategy for Aerodynamic Design and Analysis
Introduction
Design and Analysis of Centrifugal Compressors
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential