Skip to Main Content
Skip Nav Destination

Just Accepted Manuscript

Research Papers January 21, 2022
MORPHING OF REVERSIBLE AXIAL FAN BLADE: A FSI-FEM STUDY
Research Papers January 19, 2022
EFFECT OF DIFFERENTIAL TIP CLEARANCE ON THE PERFORMANCE OF A TANDEM ROTOR
Research Papers January 18, 2022
Effect of the Axial Casing Groove Geometry on the Production and Distribution of Reynolds Stresses in the Tip Region of an Axial Compressor Rotor
Research Papers January 13, 2022
MACHINE LEARNING FOR THE DEVELOPMENT OF DATA DRIVEN TURBULENCE CLOSURES IN COOLANT SYSTEMS
Research Papers January 13, 2022
Bayesian Mass Averaging in Rigs and Engines
Research Papers January 13, 2022
OVERVIEW OF THE BEST 2020 AXIAL-FLOW FAN DATA AND INCLUSION IN SIMILARITY CHARTS FOR THE SEARCH OF THE BEST DESIGN
Research Papers January 13, 2022
IN-STALL COMPRESSOR PERFORMANCE AND THE EFFECTS OF REYNOLDS NUMBER
Research Papers January 13, 2022
Effects of Rotation on the Flow Structure in a Compressor Cascade
Research Papers January 10, 2022
Experimental and Numerical Study of Heat Transfer and Pressure Loss in a Swirl Multi-pass Channel with Convergent Jet Slots
Research Papers January 10, 2022
Experimental and Numerical Study of the Turbulent Flow and Heat Transfer in a Wedge-shaped Channel with Guiding Pin Fin Arrays under Rotating Conditions
Research Papers January 10, 2022
ONE DIMENSIONAL MODELLING FOR PULSED FLOW TWIN-ENTRY TURBINE
Research Papers January 10, 2022
DESIGN AND TESTING OF A MULTI-STAGE IP TURBINE FOR FUTURE GEARED TURBOFANS
Research Papers January 10, 2022
HEAT TRANSFER IN ROTATING, TRAILING EDGE, CONVERGING CHANNELS WITH FULL AND PARTIAL HEIGHT STRIP-FINS
Research Papers January 10, 2022
CALIBRATION OF A CFD METHODOLOGY FOR THE SIMULATION OF ROUGHNESS EFFECTS ON FRICTION AND HEAT TRANSFER IN ADDITIVE MANUFACTURED COMPONENTS
Research Papers January 10, 2022
Analysis of Swirl number effects on effusion flow behaviour using time resolved PIV
Research Papers December 24, 2021
Comparative Study of Tip Injection in a Transonic and Subsonic Compressor
Research Papers December 24, 2021
A Contra-Rotating Open Rotor Noise Reduction Methodology by Using Anhedral Blade Tip
Research Papers December 24, 2021
Aeroelastic aspects of Axial Compressor Stage with Self-Recirculating Casing Treatment
Research Papers December 15, 2021
A simplified method for the deposition rate assessment on the vanes of a multistage axial-flow compressor
Research Papers December 15, 2021
FLOW CHECK AND ADIABATIC EFFECTIVENESS MEASUREMENTS ON TRADITIONALLY VERSUS ADDITIVELY MANUFACTURED FILM-COOLING HOLES
Research Papers December 15, 2021
EFFECTIVE CLEARANCE AND DIFFERENTIAL GAPPING IMPACT ON SEAL FLUTTER MODELLING AND VALIDATION
Research Papers December 13, 2021
Blade Envelopes Part I: Concept and Methodology
Research Papers December 13, 2021
Blade Envelopes Part II: Multiple Objectives and Inverse Design
Research Papers December 13, 2021
A New Loss Generation Body Force Model for Fan/Compressor Blade Rows: Application to Uniform and Non-Uniform Inflow in Rotor 67
Research Papers December 13, 2021
INVESTIGATION ON MODE CHARACTERISTICS OF ROTATING INSTABILITY AND ROTATING STALL IN AN AXIAL COMPRESSOR
Research Papers December 13, 2021
Effect of Rotation on Heat Transfer in AR = 2:1 and AR = 4:1 Channels Connected by a Series of Crossover Jets
Research Papers December 13, 2021
FILM COOLING EFFECTIVENESS MEASUREMENT OF FAN-SHAPED HOLES MANUFACTURED USING EDM TECHNIQUE
Research Papers December 13, 2021
THE INFLUENCE OF PURGE FLOW PARAMETERS ON HEAT TRANSFER AND FILM COOLING IN TURBINE CENTER FRAMES
Research Papers December 13, 2021
Improved Prediction of Losses with Large Eddy Simulation in a Low- Pressure Turbine
Research Papers December 13, 2021
SURFACE HEATER FABRICATION USING MICRO-LITHOGRAPHY FOR TRANSPIRATION COOLING HEAT TRANSFER COEFFICIENT MEASUREMENTS
Research Papers December 13, 2021
COOLING PERFORMANCE OF ADDITIVELY MANUFACTURED PIN FINS IN STACKED MICROCHANNELS FOR THE INSIDE-OUT CERAMIC TURBINE SHROUD-COOLING RING
Research Papers December 6, 2021
Efficiency Scaling - Influence of Reynolds and Mach Number on Fan Performance
Research Papers December 6, 2021
Very Large Eddy Simulation of Aero-Thermal Performance in Squealer Tip Gap
Research Papers December 6, 2021
Aero-Structural Coupling Strategy for a Morphing Blade Cascade Study
Research Papers December 6, 2021
Correlating Time-Resolved Pressure Measurements with Rim Sealing Effectiveness for Real-Time Turbine Health Monitoring
Research Papers November 15, 2021
ANALYSIS OF AVERAGING METHODS FOR NON-UNIFORM TOTAL PRESSURE FIELDS
Research Papers June 23, 2021
An Analysis of the Secondary Flow Around a Tandem Blade Under the Presence of a Tip Gap in a High-Speed Linear Compressor Cascade
Research Papers May 20, 2021
PHANTOM COOLING EFFECTS ON ROTOR BLADE SURFACE HEAT FLUX IN A TRANSONIC FULL SCALE 1+1/2 STAGE ROTATING TURBINE
Research Papers May 11, 2021
The Effect of Heat Transfer on Turbine Performance
Research Papers April 20, 2021
Stall Behavior in an Ultra-High-Pressure-Ratio Centrifugal Compressor: Backward-Traveling Rotating Stall
Research Papers March 10, 2021
EXPERIMENTAL INVESTIGATION OF TIP DESIGN EFFECTS ON THE UNSTEADY AERODYNAMICS AND HEAT TRANSFER OF A HIGH SPEED TURBINE
Research Papers February 26, 2021
Numerical Characterisation of a HP Compressor Stage Equipped with a Closed Shrouded Stator Cavity
Research Papers January 22, 2021
The Effect of Reaction on Compressor Performance
Research Papers August 7, 2020
Modelling the Unsteady Dynamics of a Turbine Research Facility
Research Papers February 5, 2020
Multipoint optimization of an axial turbine cascade using a hybrid algorithm
Research-Article May 15, 2019
Effect of the gas to wall temperature ratio on the bypass transition
Close Modal

or Create an Account

Close Modal
Close Modal