Skip Nav Destination
Issues
October 2005
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Research Papers
Prediction of Fretting Fatigue Behavior of Metals Using a Fracture Mechanics Approach with Special Consideration to the Contact Problem
J. Tribol. October 2005, 127(4): 685–693.
doi: https://doi.org/10.1115/1.2000265
Topics:
Contact mechanics
,
Fatigue
,
Fatigue cracks
,
Fracture mechanics
,
Stiffness
,
Stress
,
Fatigue strength
,
Pressure
,
Fracture (Materials)
,
Fatigue limit
Thermal Analysis of the Transient Temperatures Arising at the Contact Spots of Two Sliding Surfaces
J. Tribol. October 2005, 127(4): 694–704.
doi: https://doi.org/10.1115/1.2000983
Topics:
Fractals
,
Heat
,
Heat conduction
,
Temperature
,
Stress
,
Relaxation (Physics)
,
Thermal analysis
,
Dimensions
Elastic-Plastic Partial Slip Rolling Wheel-Rail Contact with an Oblique Rail Crack
J. Tribol. October 2005, 127(4): 705–712.
doi: https://doi.org/10.1115/1.2033006
Topics:
Finite element model
,
Fracture (Materials)
,
Pressure
,
Rails
,
Shear stress
,
Stress
,
Wheels
,
Friction
,
Rolling contact
,
Finite element analysis
Elastic-Plastic Finite Element Analysis of Nonsteady State Partial Slip Wheel-Rail Rolling Contact
J. Tribol. October 2005, 127(4): 713–721.
doi: https://doi.org/10.1115/1.2033898
Topics:
Deformation
,
Finite element analysis
,
Plasticity
,
Rails
,
Rolling contact
,
Stress
,
Wheels
,
Pressure
,
Shear (Mechanics)
,
Simulation
Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered Surfaces
J. Tribol. October 2005, 127(4): 722–728.
doi: https://doi.org/10.1115/1.2000273
Topics:
Lubrication
,
Modeling
,
Texture (Materials)
,
Stress
,
Density
,
Film thickness
,
Design
,
Tribology
Elastohydrodynamic Lubrication Modeling of Artificial Hip Joints Under Steady-State Conditions
J. Tribol. October 2005, 127(4): 729–739.
doi: https://doi.org/10.1115/1.1924460
Topics:
Elastohydrodynamic lubrication
,
Film thickness
,
Lubrication
,
Pressure
,
Stress
,
Steady state
,
Modeling
,
Hip joint prostheses
,
Bearings
,
Physiology
The Quantification of Physiologically Relevant Cross-Shear Wear Phenomena on Orthopaedic Bearing Materials Using the MAX-Shear Wear Testing System
J. Tribol. October 2005, 127(4): 740–749.
doi: https://doi.org/10.1115/1.2000272
Topics:
Bearings
,
Damage
,
Shear (Mechanics)
,
Wear
,
Wear testing
,
Testing
,
Friction
Transient Three-Dimensional Solution for Thermoelastic Displacement Due to Surface Heating and Convective Cooling
J. Tribol. October 2005, 127(4): 750–755.
doi: https://doi.org/10.1115/1.1924574
Topics:
Convection
,
Cooling
,
Displacement
,
Heat
,
Heating
,
Thermoelasticity
,
Transients (Dynamics)
,
Temperature
Frictionally Excited Thermoelastic Instabilities of Annular Plates Under Thermal Pre-Stress
J. Tribol. October 2005, 127(4): 756–765.
doi: https://doi.org/10.1115/1.2000980
Topics:
Eigenvalues
,
Feedback
,
Friction materials
,
Heat
,
Stress
,
Thermoelasticity
,
Plates (structures)
,
Deflection
,
Membranes
,
Damping
Effects of Lubricants on the Friction and Wear Properties of PTFE and POM
J. Tribol. October 2005, 127(4): 766–775.
doi: https://doi.org/10.1115/1.2005276
Topics:
Friction
,
Stress
,
Wear
,
Lubrication
,
Polymers
,
Steel
,
Lubricants
Vibration Monitoring and Damage Quantification of Faulty Ball Bearings
J. Tribol. October 2005, 127(4): 776–783.
doi: https://doi.org/10.1115/1.2033899
Topics:
Ball bearings
,
Bearings
,
Damage
,
Poincaré maps
,
Vibration
,
Rotors
Probabilistic Main Bearing Performance for an Internal Combustion Engine
J. Tribol. October 2005, 127(4): 784–792.
doi: https://doi.org/10.1115/1.2000268
Topics:
Bearings
,
Design
,
Engines
,
Sensitivity analysis
,
Probability
,
Pressure
,
Algorithms
,
Optimization
An Average Flow Model of the Reynolds Roughness Including a Mass-Flow Preserving Cavitation Model
J. Tribol. October 2005, 127(4): 793–802.
doi: https://doi.org/10.1115/1.2005307
Topics:
Cavitation
,
Flow (Dynamics)
,
Surface roughness
,
Pressure
CFD Analysis of a Low Friction Pocketed Pad Bearing
J. Tribol. October 2005, 127(4): 803–812.
doi: https://doi.org/10.1115/1.2032990
Topics:
Bearings
,
Computational fluid dynamics
,
Friction
,
Pressure
,
Cavitation
An Experimental Study of Journal Bearing Lubrication Effected by Journal Misalignment as a Result of Shaft Deformation Under Load
J. Tribol. October 2005, 127(4): 813–819.
doi: https://doi.org/10.1115/1.2033007
Topics:
Bearings
,
Deformation
,
Film thickness
,
Journal bearings
,
Lubrication
,
Pressure
,
Stress
,
Temperature
,
Friction
Numerical Analysis of a Journal Bearing With a Heterogeneous Slip/No-Slip Surface
J. Tribol. October 2005, 127(4): 820–825.
doi: https://doi.org/10.1115/1.2033897
Topics:
Bearings
,
Friction
,
Journal bearings
,
Leakage
,
Numerical analysis
,
Stress
,
Boundary-value problems
Experimental Evaluation of Piston-Assembly Friction Under Motored and Fired Conditions in a Gasoline Engine
J. Tribol. October 2005, 127(4): 826–836.
doi: https://doi.org/10.1115/1.1924459
Topics:
Engines
,
Friction
,
Manufacturing
,
Pistons
,
Lubricants
,
Temperature
,
Cylinders
Grain Flow for Rough Surfaces Considering Grain/Grain Collision Elasticity
J. Tribol. October 2005, 127(4): 837–844.
doi: https://doi.org/10.1115/1.2005287
Topics:
Collisions (Physics)
,
Flow (Dynamics)
,
Surface roughness
,
Elasticity
,
Lubrication
Effects of Rolling Friction of the Balancing Balls on the Automatic Ball Balancer for Optical Disk Drives
J. Tribol. October 2005, 127(4): 845–856.
doi: https://doi.org/10.1115/1.2032992
Topics:
Disks
,
Rolling friction
,
Steady state
,
Vibration
,
Rotors
Development of Friction Drive Transmission
J. Tribol. October 2005, 127(4): 857–864.
doi: https://doi.org/10.1115/1.2032993
Statistical Distribution of Tapered Roller Bearing Fatigue Lives at High Levels of Reliability
J. Tribol. October 2005, 127(4): 865–870.
doi: https://doi.org/10.1115/1.2000981
Friction Control of Active-Head Slider During Flying Height Adjustment
J. Tribol. October 2005, 127(4): 871–877.
doi: https://doi.org/10.1115/1.2000266
Optimization of Air Bearing Contours for Shock Performance of a Hard Disk Drive
J. Tribol. October 2005, 127(4): 878–883.
doi: https://doi.org/10.1115/1.2000979
Topics:
Air bearings
,
Design
,
Disks
,
Optimization
,
Shock (Mechanics)
,
Genetic algorithms
,
Steady state
Technical Briefs
A Compact Model for Spherical Rough Contacts
J. Tribol. October 2005, 127(4): 884–889.
doi: https://doi.org/10.1115/1.2000982
Topics:
Deformation
,
Pressure
,
Surface roughness
Influence of Contact Pressure on Central and Minimum Film Thickness Within Ultrathin Film Lubricated Contacts
J. Tribol. October 2005, 127(4): 890–892.
doi: https://doi.org/10.1115/1.2032991
Topics:
Film thickness
,
Lubricants
,
Pressure
,
Thin films
,
Interferometry
Modified Reynolds Equation for Non-Newtonian Fluid With Rheological Model in Frequency Domain
J. Tribol. October 2005, 127(4): 893–898.
doi: https://doi.org/10.1115/1.2033005
Topics:
Fluids
,
Lubricants
,
Lubrication
,
Non-Newtonian fluids
,
Pressure
,
Relaxation (Physics)
,
Rheology
,
Shear (Mechanics)
,
Stress
,
Viscosity
The Effect of Periodic Textures on the Static Characteristics of Thrust Bearings
J. Tribol. October 2005, 127(4): 899–902.
doi: https://doi.org/10.1115/1.2033896
Topics:
Bearings
,
Friction
,
Shapes
,
Texture (Materials)
,
Thrust bearings
,
Stress
,
Cavitation
Email alerts
RSS Feeds
Tribological Behavior of Annealed FeCoNiMn0.25Al0.25 High-Entropy Alloy
J. Tribol (November 2025)
Friction Reduction and Lubrication Performance of New Microemulsion Cutting Fluid for AISI 1045
J. Tribol (December 2025)
Friction and Wear Behaviors of HT200 Sliding Against QT600 Under Flame Ablation Environment
J. Tribol (December 2025)
