Skip Nav Destination
Issues
April 1997
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Research Papers
Semi-Analytical Modeling of Crack Initiation Dominant Contact Fatigue Life for Roller Bearings
J. Tribol. April 1997, 119(2): 233–240.
doi: https://doi.org/10.1115/1.2833163
Topics:
Fatigue life
,
Fracture (Materials)
,
Modeling
,
Roller bearings
,
Shear stress
,
Stress
,
Fatigue
,
Failure mechanisms
,
Fatigue testing
,
Film thickness
Flying Characteristics of the Transverse and Negative Pressure Contour (“TNP”) Slider Air Bearing
J. Tribol. April 1997, 119(2): 241–248.
doi: https://doi.org/10.1115/1.2833166
Topics:
Air bearings
,
Pressure
,
Cavities
,
Rails
,
Disks
,
Etching
,
Reservoirs
,
Stiffness
,
Vacuum
,
Damping
Behavior of Cold-Rolling Oil-in-Water Emulsions: A Rheological Approach
J. Tribol. April 1997, 119(2): 250–258.
doi: https://doi.org/10.1115/1.2833173
Topics:
Cold rolling
,
Emulsions
,
Rheology
,
Water
,
Pressure
,
Shear rate
,
Temperature
,
Viscosity
,
High pressure (Physics)
,
Lubricants
On the Numerical Determination of Flow Factors
J. Tribol. April 1997, 119(2): 259–264.
doi: https://doi.org/10.1115/1.2833178
The Boiling Interface in a Misaligned Two-Phase Mechanical Seal
J. Tribol. April 1997, 119(2): 265–271.
doi: https://doi.org/10.1115/1.2833180
Topics:
Boiling
,
Heat transfer
,
Thermohydrodynamics
Numerical Analysis of Temperature Distribution at the Lip Seal-Shaft Interface
J. Tribol. April 1997, 119(2): 273–278.
doi: https://doi.org/10.1115/1.2833188
Forces and Moments Due to Misalignment Vibrations in Annular Liquid Seals Using the Averaged Navier-Stokes Equations
J. Tribol. April 1997, 119(2): 279–287.
doi: https://doi.org/10.1115/1.2833194
Topics:
Navier-Stokes equations
,
Vibration
,
Flow (Dynamics)
,
Boundary-value problems
,
Rotors
,
Turbulence
Central and Minimum Elastohydrodynamic Film Thickness at High Contact Pressure
J. Tribol. April 1997, 119(2): 291–296.
doi: https://doi.org/10.1115/1.2833204
Topics:
Film thickness
,
Pressure
,
High pressure (Physics)
,
Stress
,
Computation
,
Modeling
Measurements of Static Loading Versus Eccentricity in a Flexure-Pivot Tilting Pad Journal Bearing
J. Tribol. April 1997, 119(2): 297–304.
doi: https://doi.org/10.1115/1.2833205
Topics:
Bending (Stress)
,
Journal bearings
,
Bearings
,
Stress
,
Convection
,
Fluid films
,
Manufacturing
,
Temperature
,
Thermal analysis
Fluid Inertia Effects on the Performance of Short and Long Squeeze Film Dampers Executing Periodic Vibration
J. Tribol. April 1997, 119(2): 306–314.
doi: https://doi.org/10.1115/1.2833211
Topics:
Dampers
,
Fluids
,
Inertia (Mechanics)
,
Vibration
,
Bearings
,
Flow (Dynamics)
,
Pressure
,
Shear stress
,
Stress
,
Clearances (Engineering)
Numerical Simulation of the Effects of Three-Dimensional Roughness on Hydrodynamic Lubrication: Correlation Coefficients
J. Tribol. April 1997, 119(2): 315–322.
doi: https://doi.org/10.1115/1.2833216
Topics:
Computer simulation
,
Lubrication
,
Surface roughness
,
Pressure
,
Anisotropy
,
Bearings
,
Boundary-value problems
,
Filters
,
Finite element methods
,
Flow (Dynamics)
A Nonlinear Model for Structural Vibrations in Rolling Element Bearings: Part II—Simulation and Results
J. Tribol. April 1997, 119(2): 323–331.
doi: https://doi.org/10.1115/1.2833218
Topics:
Rolling bearings
,
Simulation
,
Vibration
,
Bearings
,
Inertia (Mechanics)
,
Lubrication
,
Rollers
,
Stress
Three-Dimensional Finite Element Analysis of Subsurface Stress and Strain Fields Due to Sliding Contact on an Elastic-Plastic Layered Medium
J. Tribol. April 1997, 119(2): 332–341.
doi: https://doi.org/10.1115/1.2833223
Topics:
Finite element analysis
,
Stress
,
Friction
,
Materials properties
,
Elastic moduli
,
Fracture (Materials)
,
Residual stresses
,
Shear stress
,
Tension
,
Yield stress
Hydrodynamic Segregation, Entrainment and Rejection of Oil in Emulsion Lubrication Problems
J. Tribol. April 1997, 119(2): 342–348.
doi: https://doi.org/10.1115/1.2833225
Topics:
Emulsions
,
Lubrication
,
Drops
,
Particulate matter
,
Flow (Dynamics)
,
Lubricants
,
Cross-flow
,
Equilibrium (Physics)
,
Fluid-dynamic forces
,
Foil bearings
Influence of Rolling Speed Upon Friction in Cold Rolling of Foils
J. Tribol. April 1997, 119(2): 349–357.
doi: https://doi.org/10.1115/1.2833228
Topics:
Cold rolling
,
Friction
,
Lubricants
,
Deformation
,
Lubrication
,
Shear stress
,
Simulation
,
Strips
,
Boundary lubrication
,
Die cutting
Discussions
Closure to “Discussion of ‘The Boiling Interface in a Misaligned Two-Phase Mechanical Seal’” (1997, ASME J. Tribol., 119, p. 271)
J. Tribol. April 1997, 119(2): 271–272.
doi: https://doi.org/10.1115/1.2833184
Topics:
Boiling
Discussion: “Forces and Moments Due to Misalignment Vibrations in Annular Liquid Seals Using the Averaged Navier-Stokes Equations” (Arghir, M., and Freˆne, J., 1997, ASME J. Tribol., 119, pp. 279–287)
J. Tribol. April 1997, 119(2): 287–288.
doi: https://doi.org/10.1115/1.2833195
Topics:
Navier-Stokes equations
,
Vibration
Discussion: “Forces and Moments Due to Misalignment Vibrations in Annular Liquid Seals Using the Averaged Navier-Stokes Equations” (Arghir, M., and Freˆne, J., 1997, ASME J. Tribol., 119, pp. 279–287)
J. Tribol. April 1997, 119(2): 288.
doi: https://doi.org/10.1115/1.2833196
Topics:
Navier-Stokes equations
,
Vibration
Discussion: “Forces and Moments Due to Misalignment Vibrations in Annular Liquid Seals Using the Averaged Navier-Stokes Equations” (Arghir, M., and Freˆne, J., 1997, ASME J. Tribol., 119, pp. 279–287)
J. Tribol. April 1997, 119(2): 288.
doi: https://doi.org/10.1115/1.2833197
Topics:
Navier-Stokes equations
,
Vibration
Discussion: “Measurements of Static Loading Versus Eccentricity in a Flexure-Pivot Tilting Pad Journal Bearing” (Walton, N. V., and San Andres, L., 1997, ASME J. Tribol., 119, pp. 297–304)
J. Tribol. April 1997, 119(2): 304.
doi: https://doi.org/10.1115/1.2833206
Topics:
Bending (Stress)
,
Journal bearings
Closure to “Discussion of ‘Measurements of Static Loading Versus Eccentricity in a Flexure-Pivot Tilting Pad Journal Bearing’” (1997, ASME J. Tribol., 119, p. 304)
J. Tribol. April 1997, 119(2): 304–305.
doi: https://doi.org/10.1115/1.2833208
Topics:
Bending (Stress)
Discussion: “Steady-State Analysis of Mechanical Seals With Two Flexibly Mounted Rotors” (Wileman, J., and Green, I., 1997, ASME J. Tribol., 119, pp. 200–204)
J. Tribol. April 1997, 119(2): 361.
doi: https://doi.org/10.1115/1.2833232
Topics:
Rotors
,
Steady state
Closure to “Discussion of ‘Steady-State Analysis of Mechanical Seals With Two Flexibly Mounted Rotors’” (1997, ASME J. Tribol., 119, p. 361)
J. Tribol. April 1997, 119(2): 361–362.
doi: https://doi.org/10.1115/1.2833233
Topics:
Steady state
Technical Briefs
Inclusion of Roughness Effects in Perturbed Navier-Stokes Rotordynamic Methods
J. Tribol. April 1997, 119(2): 358–360.
doi: https://doi.org/10.1115/1.2833231
Topics:
Surface roughness
Email alerts
RSS Feeds
Leakage Control Mechanisms and Strategies for Hydraulically Driven Controllable Rod Seals
J. Tribol (April 2025)
Flow Characteristics of Asymmetric Plunger Pairs in High-Pressure Plunger Pumps
J. Tribol (April 2025)