Abstract

To satisfy the large-scale and high-power demands of wind turbines, planetary gear journal bearings (PGJBs) have been applied in large wind turbine gearboxes (WTGs), as an alternative to traditional rolling bearings, due to their higher reliability and smaller size. To simulate the actual lubrication behaviors of PGJBs and investigate their hydrodynamic performance, a full-size test rig for PGJBs was built in this paper. A multi-parameter detection system coupled with the ultrasonic testing method was developed. Four ultrasonic piezoelectric elements, eight thermistors, two pressure transducers, and one torque sensor were used to obtain the film thickness, oil temperature, oil pressure, and friction torque data of the test PGJB. The rated condition experiment was conducted to investigate the variation of measured lubrication performance with the operating time. Three-dimensional predictions of oil film pressure, temperature, and thickness were presented to analyze the steady-state lubrication characteristic at the rated condition. Moreover, a series of steady-state experiments were also carried out to simulate the normal operations of the test PGJB at different conditions. And the measured results were verified by the numerical predictions. The influence of rotational speed, input load, oil supply temperature, and oil supply flow on the hydrodynamic performance of the test PGJB were explored.

This content is only available via PDF.
You do not currently have access to this content.