Abstract

The purpose of this study is to investigate the modeling method of static stiffness for the linear motion roller guide (LMRG) with five degrees-of-freedom (5DOF). The model of static stiffness for the LMRG with 5DOF was established using the slicing method, the guide deformation compatible equation, and the force equilibrium equation of the guide. The static stiffness of the LMRG was analyzed systematically via a case study, and the simulating results were verified by the experimental data. The results show that the proposed model can be used to calculate the complete static stiffness for the LMRG with 5DOF.

References

References
1.
Zhao
,
G.
,
Xiong
,
Z.
,
Jin
,
X.
,
Hou
,
L.
, and
Gao
,
W.
,
2018
, “
Prediction of Contact Stiffness in Bolted Interface With Natural Frequency Experiment and Finite Element Analysis
,”
Tribol. Int.
,
127
(
10
), pp.
157
164
. 10.1016/j.triboint.2018.05.044
2.
Li
,
X.
,
Zhao
,
G.
, and
Wen
,
B.
,
2013
, “
Fractal Prediction Model for Tangential Contact Stiffness of Joint Surface Considering Friction Factors and Its Simulation Analysis
,”
Tribology
,
33
(
5
), pp.
463
468
.
3.
Zhang
,
H.
,
Zhiheng
,
W. U.
,
Chen
,
M.
,
Zheng
,
Z.
, and
Cao
,
P.
,
2017
, “
Contact Surface Parameters Identification and Numerical Simulation of the Roller Linear Guides
,”
Mach. Tool Hydraul.
,
45
(
11
), pp.
121
125
(in Chinese).
4.
Guo
,
C.
,
Yuan
,
J.
,
Zhang
,
H.
, and
Wang
,
Z.
,
2011
, “
Experimental Research on the Dynamic Stiffness of Rolling Guide’s Joint
,”
Mach. Des. Manuf.
,
49
(
12
), pp.
115
117
.
5.
Kai
,
Y.
,
Fukuta
,
M.
,
Matsubara
,
A.
, and
Kono
,
D.
,
2013
, “
Dynamic Characteristics of Ultra-Precision Machine Tools (Evaluation for Stiffness of Guideways by Impact Test)
,”
Trans. Jpn. Soc. Mech. Eng.
,
79
(
808
), pp.
4624
4633
. 10.1299/kikaic.79.4624
6.
Ohta
,
H.
,
Kato
,
T.
,
Kato
,
S.
, and
Tajimi
,
H.
,
2015
, “
Carriage Drift in Linear-Guideway Type Roller Bearings
,”
ASME J. Tribol.
,
137
(
2
), p.
024505
. 10.1115/1.4029641
7.
Harris
,
T. A.
, and
Kotzalas
,
M. N.
,
2007
,
Rolling Bearing Analysis: Advanced Concepts of Bearing Technology
,
5th ed.
,
CRC Press
,
Boca Raton, FL
.
8.
Houpert
,
L.
,
2014
, “
An Enhanced Study of the Load–Displacement Relationships for Rolling Element Bearings
,”
ASME J. Tribol.
,
136
(
1
), p.
011105
. 10.1115/1.4025602
9.
Feng
,
J.
,
Zhao
,
M.
,
Chen
,
W.
, and
Yang
,
X.
,
2013
, “
The Calculation and Verification for the Rigidity of the Roller Linear Guide
,”
Mech. Electr. Eng. Technol.
,
42
(
8
), pp.
159
162
(in Chinese).
10.
Liu
,
S.
,
2011
, “
Mechanical Performance Analysis of Roller Linear Guide Pair
,”
Ph.D. thesis
,
Huazhong University of Science and Technology
,
Wuhan
(in Chinese).
11.
Shu
,
Y.
,
Ou
,
Y.
,
Zu
,
L.
,
Jiang
,
B.
, and
Zang
,
W.
,
2016
, “
Study on Preloading of Roller Linear Guide Way Based on Stiffness Measurement
,”
Eng. Test
,
56
(
3
), pp.
22
25
(in Chinese).
12.
Dan
,
X. U.
,
Liu
,
Q.
, and
Yuan
,
S.
,
2008
, “
Research on Static Stiffness of Roller Guideway
,”
Mach. Tool Hydraul.
,
36
(
4
), pp.
8
10
(in Chinese).
13.
Ke
,
N.
,
Feng
,
H. T.
,
Chen
,
Z. T.
,
Ou
,
Y.
, and
Zhou
,
C. G.
,
2016
, “
Real Contact Total Length of Linear Motion Roller Guide Without Preload Based on Greenwood-Williamson Rough Contact Model
,”
Proc. Inst. Mech. Eng. Part C
,
231
(
22
), pp.
4274
4284
. 10.1177/0954406216664548
14.
Horng
,
T.
,
2009
, “
An Analytical Solution of the Stiffness Equation for Linear Guideway Type Recirculating Rollers With Arbitrarily Crowned Profiles
,”
Proc. Inst. Mech. Eng. Part C
,
223
(
6
), pp.
1351
1358
. 10.1243/09544062JMES1208
15.
Teutsch
,
R.
, and
Sauer
,
B.
,
2004
, “
An Alternative Slicing Technique to Consider Pressure Concentrations in Non-Hertzian Line Contacts
,”
ASME J. Tribol.
,
126
(
3
), pp.
436
442
. 10.1115/1.1739244
16.
Kabus
,
S.
,
Hansen
,
M. R.
, and
Mouritsen
,
O.
,
2012
, “
A New Quasi-Static Cylindrical Roller Bearing Model to Accurately Consider Non-Hertzian Contact Pressure in Time Domain Simulations
,”
ASME J. Tribol.
,
134
(
4
), p.
041401
. 10.1115/1.4007219
17.
Mul
,
J. M. D.
,
Vree
,
J. M.
, and
Maas
,
D.
,
1989
, “
Equilibrium and Associated Load Distribution in Ball and Roller Bearings Loaded in Five Degrees-of-Freedom While Neglecting Friction—Part I: General Theory and Application to Ball Bearings
,”
ASME J. Tribol.
,
111
(
1
), pp.
142
148
. 10.1115/1.3261864
18.
Zhu
,
D.
,
Wang
,
J.
,
Ren
,
N.
, and
Wang
,
Q.
,
2012
, “
Mixed Elastohydrodynamic Lubrication in Finite Roller Contacts Involving Realistic Geometry and Surface Roughness
,”
ASME J. Tribol.
,
134
(
1
), p.
011504
. 10.1115/1.4005952
19.
Luo
,
J.
,
2009
,
Rolling Bearing Analysis and Application
,
Machinery Industry Press
,
Beijing, China
(in Chinese).
20.
Shimizu
,
S.
,
1990
, “
Load Distribution and Accuracy/Rigidity of Linear Motion Ball Guide System
,”
JSPE
,
56
(
8
), pp.
1445
1451
(in Japanese).
21.
Jin
,
Y. S.
,
1993
,
Proceedings of the First International Symposium on Tribology
,
International Academic Publishers
,
Beijing, China
.
22.
Timoshenko
,
S. P.
, and
Goodier
,
J. N.
,
1969
,
Theory of Elasticity
,
3rd ed.
,
McGraw-Hill
,
New York
.
You do not currently have access to this content.