Tests were conducted at 350 K (170 deg F) with groups of 8.9 cm (3.5-in.)-pitch-diameter spur gear with and without tip relief made of consumable-electrode vacuum melted (CVM) Super Nitralloy (5Ni-2Al) and CVM AISI M-50 steel. The AISI M-50 gears without tip relief had lives approximately 50 percent longer than the Super Nitralloy gears without tip relief. However, the Super Nitralloy gears with tip relief had lives equal to the AISI M-50 gears without tip relief. The difference in lives were not statistically significant. All gears failed by classical pitting fatigue at the pitch circle. However, the AISI M-50 gears with tip relief failed by tooth fracture. AISI M-50 gear sets without tip relief having a spalled gear tooth which were deliberately overrun after spalling had occurred, failed by tooth fracture.
A Life Study of AISI M-50 and Super Nitralloy Spur Gears With and Without Tip Relief
- Views Icon Views
- Share Icon Share
- Search Site
Townsend, D. P., and Zaretsky, E. V. (October 1, 1974). "A Life Study of AISI M-50 and Super Nitralloy Spur Gears With and Without Tip Relief." ASME. J. of Lubrication Tech. October 1974; 96(4): 583–589. https://doi.org/10.1115/1.3452501
Download citation file: