Abstract
This research focuses on self-lubricating spherical plain bearings. An analysis of contact mechanics through conformal methods indicates that contact pressure diminishes from the center and exhibits an uneven distribution. Drawing inspiration from human joints, the concept of microscale asphericity in friction pairs is introduced, leading to the development of “open” and “closed” bearing designs. Finite element analysis of wear demonstrates that traditional spherical bearings experience significant initial wear at the center. In contrast, the “closed” bearing, characterized by an ellipticity of 0.07, substantially reduces central wear. Additionally, wear testing and micromaterial investigations examine mechanisms of wear resistance, providing valuable insights for the advancement of self-lubricating spherical plain bearings.
References
1.
Liu
, J.
, Lu
, F.
, Du
, S.
, Pang
, X.
, and Zhang
, Y.
, 2020
, “Friction and Wear Behaviors of Kevlar/Polytetrafluoroethylene Braided Composite in Oscillatory Contacts
,” J. Mater. Eng. Perform.
, 29
(5
), pp. 2605
–2611
. 2.
Liu
, Y.
, Ma
, G.
, Zhu
, L.
, Han
, C.
, Li
, Z.
, Zhang
, B.
, Zhao
, H.
, Wang
, H.
, and Chen
, S.
, 2024
, “A New Coated Self-lubricating Spherical Plain Bearing With High Performance and Excellent Security
,” Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol.
, 238
(1
), pp. 60
–72
. 3.
Liu
, C.
, Wang
, J.
, Zhao
, S.
, Yan
, X.
, and Qi
, X.
, 2023
, “Influence of an Outer Ring End Offset on the Service Life and Eccentric Wear Defects of Self-lubricating Spherical Plain Bearings
,” Eng. Fail. Anal.
, 143
, p. 106853
. 4.
Huang
, X.
, 2024
, “Friction and Wear Characteristics of Self-Lubricating Spherical Bearings Under Different Stresses
,” J. Aeronaut. Mater.
, 44
(1
), pp. 132
–141
. 5.
Liu
, Y.
, Xu
, N.
, Wang
, Y.
, Yao
, Y.
, Xiao
, H.
, Jia
, J.
, Lv
, H.
, and Zhang
, D.
, 2019
, “Preparation and Tribological Properties of Hybrid PTFE/Kevlar Fabric Self-lubricating Composites
,” Surf. Coat. Technol.
, 361
, pp. 196
–205
. 6.
Ren
, G.
, Zhang
, Z.
, Zhu
, X.
, Men
, X.
, Jiang
, W.
, and Liu
, W.
, 2014
, “Combined Effect of Air-Plasma Treatment and Lubricant Filling on the Dry Sliding Wear Behavior of Hybrid PTFE/Nomex Fabric/Phenolic Composite
,” Compos. Sci. Technol.
, 100
, pp. 204
–211
. 7.
Qiu
, M.
, Miao
, Y.
, Li
, Y.
, and Lu
, J.
, 2016
, “Influence of Ultrasonic Modified Liners on the Adhesive and Tribological Performances of Self-lubricating Radial Spherical Plain Bearings
,” Tribol. Trans.
, 59
(4
), pp. 655
–662
. 8.
Qiu
, M.
, Lu
, J.
, Li
, Y.
, and Lv
, G.
, 2016
, “Investigation on MoS2 and Graphite Coatings and Their Effects on the Tribological Properties of the Radial Spherical Plain Bearings
,” Chin. J. Mech. Eng.
, 29
(4
), pp. 844
–852
. 9.
Li
, H.
, Zeng
, F.
, Yin
, Z.
, Jiang
, D.
, and Hu
, Y.
, 2016
, “A Study on the Tribological Behavior of Hybrid PTFE/Kevlar Fabric Composites Filled With Nano-SiC and/or Submicron-WS2 Fillers
,” Polym. Compos.
, 37
(8
), pp. 2218
–2226
. 10.
Yang
, Z.
, Guo
, Z.
, Yang
, Z.
, Wang
, C.
, and Yuan
, C.
, 2021
, “Study on Tribological Properties of a Novel Composite by Filling Microcapsules Into UHMWPE Matrix for Water Lubrication
,” Tribol. Int.
, 153
, pp. 1
–10
. 11.
Deng
, J.
, Liu
, L.
, Yang
, X.
, Liu
, J.
, Sun
, J.
, and Zhao
, J.
, 2007
, “Self-lubrication of Al2O3/TiC/CaF2 Ceramic Composites in Sliding Wear Tests and in Machining Processes
,” Mater. Des.
, 28
(3
), pp. 757
–764
. 12.
Ding
, L.
, Axinte
, D.
, Butler-Smith
, P.
, and Abdelhafeez Hassan
, A.
, 2020
, “Study on the Characterisation of the PTFE Transfer Film and the Dimensional Designing of Surface Texturing in a Dry-Lubricated Bearing System
,” Wear
, 448–449
, pp. 1
–12
. 13.
Qi
, X.
, Wang
, H.
, Dong
, Y.
, Fan
, B.
, Zhang
, W.
, Zhang
, Y.
, Ma
, J.
, and Zhou
, Y.
, 2019
, “Experimental Analysis of the Effects of Laser Surface Texturing on Tribological Properties of PTFE/Kevlar Fabric Composite Weave Structures
,” Tribol. Int.
, 135
, pp. 104
–111
. 14.
Zhang
, Q.
, Hu
, Z.
, Su
, W.
, Zhou
, H.
, Liu
, C.
, Yang
, Y.
, and Qi
, X.
, 2017
, “Microstructure and Surface Properties of 17-4PH Stainless Steel by Ultrasonic Surface Rolling Technology
,” Surf. Coat. Technol.
, 321
, pp. 64
–73
. 15.
Xue
, Y.
, and Kang
, D.
, 2024
, “An Analytical Approach to Incomplete Spherical Conformal Contact: Application on Self-lubricating Spherical Plain Bearing
,” Ind. Lubr. Tribol.
, 77
(2
), pp. 128
–137
. 16.
Play
, D.
, and Pruvost
, B.
, 1984
, “Comparative Dry Wear of PTFE Liner Bearing in Cylindrical and Spherical Geometry
,” ASME J. Tribol.
, 106
(2
), pp. 185
–191
. 17.
Lu
, J.
, Qiu
, M.
, and Li
, Y.
, 2016
, “Numerical Analysis of Self-lubricating Radial Spherical Plain Bearings and Investigations on Fatigue Damage Mechanisms of the Liner
,” Tribol. Int.
, 96
, pp. 97
–108
. 18.
Xue
, Y.
, Chen
, J.
, Guo
, S.
, Meng
, Q.
, and Luo
, J.
, 2018
, “Finite Element Simulation and Experimental Test of the Wear Behavior for Self-lubricating Spherical Plain Bearings
,” Friction
, 6
(3
), pp. 297
–306
. 19.
Bullough
, P.
, Goodfellow
, J.
, Greenwald
, A.
, and O’Connor
, J.
, 1968
, “Incongruent Surfaces in the Human Hip Joint
,” Nature
, 217
(5137
), pp. 1290
–1291
. 20.
Meng
, Q.
, Liu
, F.
, Fisher
, J.
, and Jin
, Z.
, 2011
, “Transient Elastohydrodynamic Lubrication Analysis of a Novel Metal-on-Metal Hip Prosthesis With a Non-spherical Femoral Bearing Surface
,” Proc. Inst. Mech. Eng. Part H J. Eng. Med.
, 225
(1
), pp. 25
–37
. 21.
Hashim
, H.
, and Mohammed
, M.
, 2024
, “Design and Assessment of a Diffractive Aspheric Bifocal Intraocular Lens
,” J. Opt.
, 53
(11
), pp. 3988
–3998
. 22.
Al-Sharify
, N. T.
, Nser
, H. Y.
, Ghaeb
, N. H.
, Al-Sharify
, Z. T.
, See
, O. H.
, Weng
, L. Y.
, and Ahmed
, S. M.
, 2024
, “Influence of Different Parameters on the Corneal Asphericity (Q Value) Assessed With Progress in Biomedical Optics and Imaging—A Review
,” Heliyon
, 10
(8
), p. e35924
. 23.
Põdra
, P.
, and Andersson
, S.
, 1999
, “Simulating Sliding Wear With Finite Element Method
,” Tribol. Int.
, 32
(2
), pp. 71
–81
. 24.
Öqvist
, M.
, 2001
, “Numerical Simulations of Mild Wear Using Updated Geometry With Different Step Size Approaches
,” Wear
, 249
(1–2
), pp. 6
–11
. 25.
Ding
, J.
, McColl
, I.
, and Leen
, S.
, 2007
, “The Application of Fretting Wear Modelling to a Spline Coupling
,” Wear
, 262
(9–10
), pp. 1205
–1216
. 26.
Germaneau
, A.
, Peyruseigt
, F.
, Mistou
, S.
, Doumalin
, P.
, and Dupré
, J.-C.
, 2010
, “3D Mechanical Analysis of Aeronautical Plain Bearings: Validation of a Finite Element Model From Measurement of Displacement Fields by Digital Volume Correlation and Optical Scanning Tomography
,” Opt. Laser Eng.
, 48
(5
), pp. 676
–683
. 27.
Bastola
, A.
, Stewart
, D.
, and Dini
, D.
, 2022
, “Three-Dimensional Finite Element Simulation and Experimental Validation of Sliding Wear
,” Wear
, 504–505
, p. 204402
. 28.
Mattei
, L.
, and Di Puccio
, F.
, 2015
, “Influence of the Wear Partition Factor on Wear Evolution Modelling of Sliding Surfaces
,” Int. J. Mech. Sci.
, 99
, pp. 72
–88
. 29.
Yuan
, L.
, Bao
, H.
, Yao
, X.
, Lu
, J.
, and Liu
, J.
, 2020
, “Distribution of Conformal Contact Pressure in Spherical Plain Bearings Considering Friction and Free-Edge Effects
,” Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol.
, 235
(9
), pp. 1851
–1867
. 30.
Sharma
, T.
, Je
, S.-S.
, Gill
, B.
, and Zhang
, J. X. J.
, 2012
, “Patterning Piezoelectric Thin Film PVDF–TrFE Based Pressure Sensor for Catheter Application
,” Sens. Actuators A
, 177
, pp. 87
–92
. 31.
Pan
, L.
, Chortos
, A.
, Yu
, G.
, Wang
, Y.
, Isaacson
, S.
, Allen
, R.
, Shi
, Y.
, Dauskardt
, R.
, and Bao
, Z.
, 2014
, “An Ultra-sensitive Resistive Pressure Sensor Based on Hollow-Sphere Microstructure Induced Elasticity in Conducting Polymer Film
,” Nat. Commun.
, 5
, p. 3002
. Copyright © 2025 by ASME
You do not currently have access to this content.
