(Ti,Mo)C, TiB2, and Mo2B particles reinforced Fe-based composite coatings were fabricated by laser cladding process. The effects of Molybdenum (Mo) on the microstructure and wear properties of the coatings were investigated. The results show that block-like or cuboidal TiB2, Mo2B and flower-like (Ti, Mo)C ceramics reinforcements were formed in the coatings. The size of reinforcements reduced with the increasing of FeMo70. However, cracks were found in the coating, while the addition of FeMo70 exceeded 9 wt %. The laser cladding coating presented a good wear resistance with a 9 wt % addition of FeMo70. With the increasing of FeMo70, the coatings enhanced the capability of resisting microcutting, microplowing, and surface plastic deformation.

References

References
1.
Li
,
Y. B.
,
Deng
,
J. Z.
,
Yang
,
Y.
, and
He
,
J.
,
2013
, “
Hot Forging Die Composite Manufacturing Technology
,”
Adv. Mater. Res.
,
712–715
, pp.
615
618
.
2.
Pan
,
C.
,
Wang
,
H.
, and
Zhou
,
J.
,
2010
, “
Plasma Cladding of Ni60-SiC Cermet Coating on Hot Forging Die
,” International Conference on Computing, Control and Industrial Engineering (
CCIE
), Wuhan, China, June 5–6, pp.
12
15
.
3.
Kashani
,
H.
,
Amadeh
,
A.
, and
Vatanara
,
M. R.
,
2008
, “
Improvement of Wear Resistance of Hot Working Tool Steel by Hardfacing Part 2—Case Study
,”
Mater. Sci. Technol.
,
24
(
3
), pp.
356
360
.
4.
Yang
,
Q.
,
Ren
,
X.
,
Liu
,
L.
,
Li
,
D.
,
Dong
,
H.
, and
Liao
,
B.
,
2006
, “
Mechanism of Cracking Resistance of Hardfacing Specimens of Steel 5CrNiMo Improved by Rare Earth Oxide
,”
J. Rare Earth.
,
24
(
4
), pp.
471
478
.
5.
Chen
,
P.
,
Xian
,
X.
,
Shao
,
T.
,
La
,
Y.
, and
Li
,
J.
,
2016
, “
Effect of Triangular Texture on the Tribological Performance of Die Steel With TiN Coatings Under Lubricated Sliding Condition
,”
Appl. Surf. Sci.
,
389
, pp.
361
368
.
6.
Zhang
,
M.
,
Qu
,
K. L.
,
Luo
,
S. X.
, and
Liu
,
S. S.
,
2017
, “
Effect of Cr on the Microstructure and Properties of TiC–TiB2 Particles Reinforced Fe-Based Composite Coatings
,”
Surf. Coat. Technol.
,
316
, pp.
131
137
.
7.
Wan
,
R.
,
Sun
,
F.
,
Zhang
,
L.
, and
Shan
,
A.
,
2012
, “
Effects of Mo on High-Temperature Strength of Fire-Resistant Steel
,”
Mater. Des.
,
35
, pp.
335
341
.
8.
Srisattayakul
,
P.
,
Saikaew
,
C.
,
Wisitsoraat
,
A.
, and
Phokharatkul
,
D.
,
2017
, “
Reciprocating Two-Body Abrasive Wear Behavior of DC Magnetron Sputtered Mo-Based Coatings on Hard-Chrome Plated AISI 316 Stainless Steel
,”
Wear
,
378–379
, pp.
96
105
.
9.
Warcholinski
,
B.
,
Gilewicz
,
A.
,
Kuznetsova
,
T. A.
,
Zubar
,
T. I.
,
Chizhik
,
S. A.
,
Abetkovskaia
,
S. O.
, and
Lapitskaya
,
V. A.
,
2017
, “
Mechanical Properties of Mo(C)N Coatings Deposited Using Cathodic Arc Evaporation
,”
Surf. Coat. Technol.
,
319
, pp.
117
128
.
10.
Hou
,
T. P.
, and
Wu
,
K. M.
,
2013
, “
Alloy Carbide Precipitation in Tempered 2.25 Cr-Mo Steel Under High Magnetic Field
,”
Acta Mater.
,
61
(
6
), pp.
2016
2024
.
11.
Yang
,
Y.
,
Li
,
C.
, and
Song
,
K.
,
2012
, “
Effect of Strain Rate on the Microstructures and Properties of Hot-Rolled TWIP Steel in the Solution Condition
,”
Adv. Mater. Res.
,
430–432
, pp.
256
259
.
12.
Carreri
,
F. C.
,
Oliveira
,
R. M.
,
Oliveira
,
A. C.
,
Silva
,
M. M. N. F.
,
Ueda
,
M.
,
Silva
,
M. M.
, and
Pichon
,
L.
,
2014
, “
Phase Formation and Mechanical/Tribological Modification Induced by Nitrogen High Temperature Plasma Based Ion Implantation Into Molybdenum
,”
Appl. Surf. Sci.
,
310
, pp.
305
310
.
13.
Zhang
,
X.
,
Liu
,
N.
, and
Rong
,
C.
,
2008
, “
Effect of Molybdenum Content on the Microstructure and Mechanical Properties of Ultra-Fine Ti(C,N) Based Cermet
,”
Mater. Charact.
,
59
(
12
), pp.
1690
1696
.
14.
Wang
,
Z.
,
Zhang
,
H.
,
Guo
,
C.
,
Liu
,
W.
,
Yang
,
Z.
,
Sun
,
X.
,
Zhang
,
Z.
, and
Jiang
,
F.
,
2016
, “
Effect of Molybdenum Addition on the Precipitation of Carbides in the Austenite Matrix of Titanium Micro-Alloyed Steels
,”
J. Mater. Sci.
,
51
(10), pp.
4996
5007
.
15.
Han
,
Q. H.
,
Kang
,
Y. L.
,
Zhao
,
X. M.
,
Gao
,
L. F.
, and
Qiu
,
X. S.
,
2011
, “
High-Temperature Properties and Microstructure of Mo Microalloyed Ultra-High-Strength Steel
,”
Inter. J. Miner. Metall. Mater.
,
18
(
4
), pp.
407
413
.
16.
Qu
,
K. L.
,
Wang
,
X. H.
,
Wang
,
Z. K.
, and
Niu
,
W. Y.
,
2017
, “
Effect of Mo on the VC–VB Particles Reinforced Fe-Based Composite Coatings
,”
Mater. Sci. Technol.
,
33
(
3
), pp.
333
339
.
17.
Chew
,
Y. X.
,
Pang
,
J. H. L.
,
Bi
,
G. J.
, and
Song
,
B.
,
2015
, “
Thermo-Mechanical Model for Simulating Laser Cladding Induced Residual Stresses With Single and Multiple Clad Beads
,”
J. Mater. Process. Technol.
,
224
, pp.
89
101
.
18.
Lu
,
L.
,
Fuh
,
J. Y. H.
,
Chen
,
Z. D.
,
Leong
,
C. C.
, and
Wong
,
Y. S.
,
2000
, “
In Situ Formation of TiC Composite Using Selective Laser Melting
,”
Mater. Res. Bull.
,
35
(
9
), pp.
1555
1561
.
19.
Liang
,
Y. J.
, and
Chen
,
Y. C.
,
1993
,
Thermodynamic Data Notebook of Inorganics
,
Northeast University Press
,
Shenyang, China
.
20.
Kong
,
J. H.
, and
Xie
,
C.
,
2006
, “
Effect of Molybdenum on Continuous Cooling Bainite Transformation of Low-Carbon Micro-Alloyed Steel
,”
Mater. Des.
,
27
(
10
), pp.
1169
1173
.
21.
Hu
,
H.
, and
Guang
,
X.
,
2015
, “
The Effects of Nb and Mo Addition on Transformation and Properties in Low Carbon Bainitic Steels
,”
Mater. Des.
,
84
, pp.
95
99
.
You do not currently have access to this content.