In order to obtain the viscoelastic properties of friction linings and their effect on the tribological properties, three friction linings (K25, G30, and GM-3) are studied. Results show that higher creep and stress relaxation performances are favorable for promoting the friction coefficient. The friction coefficient of GM-3 is inversely proportional to the load. Meanwhile, the friction coefficients of K25 and G30 first increase to the peak under the load and later decrease. Under high load, GM-3 has the largest friction coefficient, whereas K25 has the smallest, with that of G30 being the median. The friction coefficient of GM-3 is inversely proportional to the loss factor, whereas those of K25 and G30 are directly proportional.
Issue Section:
Technical Brief
References
1.
Ge
, S. R.
, 1992
, “The Friction Coefficients Between the Steel Rope and Polymer Lining in Frictional Hoisting
,” Wear
, 152
(1
), pp. 21
–29
.2.
Wang
, H. Q.
, Wu
, X. Y.
, Li
, T. S.
, Liu
, X. J.
, and Cong
, P. H.
, 2012
, “Effect of the Matrix Resin Structure on the Mechanical Properties and Braking Performance of Organic Brake Pads
,” J. Appl. Polym. Sci.
, 126
(5
), pp. 1746
–1753
.3.
Peng
, Y. X.
, Zhu
, Z. C.
, and Chen
, G. A.
, 2009
, “Dynamic Mechanical Properties of Polymer-Lining and Their Effect on Coefficient of Friction
,” Proc. Inst. Mech. Eng. J. Eng. Tribol.
, 223
(7
), pp. 1067
–1072
.4.
Thomine
, M.
, Degrange
, J. M.
, Vigier
, G.
, Chazeau
, L.
, Pelletier
, J. M.
, Kapsa
, P.
, Guerbé
, L.
, and Dudragne
, G.
, 2007
, “Study of Relations Between Viscoelasticity and Tribological Behavior of Filled Elastomer for Lip Seal Application
,” Tribol. Int.
, 40
(2
), pp. 405
–411
.5.
Hideki
, Y.
, Takeshi
, K.
, Masaoki
, T.
, and Horiuchi
, T.
, 2001
, “Viscoelastic and Tribological Properties of Epoxy Resins
,” Soc. Mater. Sci.
, 50
(7
), pp. 772
–777
.6.
Jrad
, H.
, Renaud
, F.
, Dion
, J. L.
, Tawfiq
, I.
, and Haddar
, M.
, 2013
, “Experimental Characterization, Modeling and Parametric Identification of the Hysteretic Friction Behavior of Viscoelastic Joints
,” Int. J. Appl. Mech.
, 5
(2
), p. 1350018
.7.
Payne
, A. R.
, 1962
, “The Dynamic Properties of Carbon Black-Loaded Natural Rubber Vulcanizates
,” J. Appl. Polym. Sci.
, 6
(19
), pp. 53
–57
.8.
Zhang
, D. K.
, Chen
, K.
, and Zhang
, X. J.
, 2016
, “Comparison of the Thermophysical Properties, Microstructures, and Frictional Behavior of Lining Materials Used in Mine Hoists
,” Wear
, 354–355
(5
), pp. 1
–9
.9.
Coal Industry Association of Science and Technology Development Department
, 1991
, “Friction Coefficient Test Standard of Lining
,” Coal Industry Standard of the People's Republic of China
, Beijing, China
, Standard No. MT/T248-91.10.
State Economic, Trade Commission of the People's Republic of China
, 2002
, “Lining for Friction Hoist
,” Machinery Industry Standard of the People's Republic of China, Beijing, China, Standard No. JB/T10347-2002.11.
Chen
, L. Q.
, Zhang
, D. K.
, and Zhang
, J. S.
, 2009
, “The Appraisal of Mechanical Properties and Friction Coefficient of PVA Hydro-Gel
,” J. Biomed. Eng.
, 26
(5
), pp. 1021
–1024
.12.
Sun
, C.
, Ding
, L.
, and Zhang
, P.
, 2010
, “Changes in Crosslink Structure and Dynamic Viscoelasticity of ESBR Vulcanizate During Tensile Fatigue
,” Tire Ind.
, 30
(6
), pp. 370
–376
.13.
Moore
, D. F.
, 1975
, Principles and Applications of Tribology
, Pergamon Press
, Oxford, UK
.Copyright © 2017 by ASME
You do not currently have access to this content.