Benefits of surface textures for improving the performance behaviors of tribo-contacts are being explored and established by the investigators across the globe. But the consolidated information of findings of such explorations are spread. Therefore, the objective of this paper is to summarize the information available related to the preparation of surface textures and performance outcomes in the presence of surface textures at the concentrated contacts. Mainly, recent research findings and practices followed for the study of friction, wear, lubrication, contact fatigue, vibration, and noise at the generic concentrated contacts in presence of surface textures are reviewed for current status of research in the area and outlining the future prospects.

References

References
1.
Sasaki
,
S.
,
2010
, “
Environmentally Friendly Tribology (Eco-Tribology)
,”
J. Mech. Sci. Tech.
,
24
(1), pp.
67
71
.10.1007/s12206-009-1154-1
2.
Koji
,
K.
,
2011
, “
Industrial Tribology in the Past and Future
,”
Tribol Online
,
6
, pp.
1
9
.10.2474/trol.6.1
3.
Etsion
,
I.
,
2005
, “
State of the Art in Laser Surface Texturing
,”
ASME J. Tribol.
,
127
(
1
), pp.
248
253
.10.1115/1.1828070
4.
Jacobson
,
B.
,
2000
, “
Thin Film Lubrication of Real Surfaces
,”
Tribol. Int.
,
33
(
3–4
), pp.
205
210
.10.1016/S0301-679X(00)00032-3
5.
Erdemir
,
A.
,
2005
, “
Review of Engineered Tribological Interfaces for Improved Boundary Lubrication
,”
Tribol. Int.
,
38
(
3
), pp.
249
256
.10.1016/j.triboint.2004.08.008
6.
Yu
,
H.
,
Huang
,
W.
, and
Wang
,
X.
,
2013
, “
Dimple Patterns Design for Different Circumstances
,”
Lubr. Sci.
,
25
(
2
), pp.
67
78
.10.1002/ls.168
7.
Akamatsu
,
Y.
,
Tsushiama
,
N.
,
Goto
,
T.
, and
Hibi
,
K.
,
1992
, “
Influence of Surface Roughness Skewness on Rolling Contact Fatigue Life
,”
Tribol. Trans.
,
35
(
4
), pp.
745
750
.10.1080/10402009208982180
8.
Zhai
,
X.
,
Chang
,
L.
,
Hoperch
,
M. R.
, and
Nixon
,
H. P.
,
1997
, “
On Mechanisms of Fatigue Life Enhancement by Surface Dents in Heavily Loaded Rolling Line Contacts
,”
Tribol. Trans.
,
40
(
4
), pp.
708
714
.10.1080/10402009708983712
9.
Kaneta
,
M.
,
Sakai
,
T.
, and
Nishikawa
,
H.
,
1992
, “
Optical Interferometric Observations of the Effects of a Bump on Point Contact EHL
,”
ASME J. Tribol.
,
114
(
4
), pp.
779
784
.10.1115/1.2920948
10.
Venner
,
C. H.
, and
Lubrecht
,
A. A.
,
1994
, “
Numerical Simulation of a Transverse Ridge in a Circular EHL Contact Under Rolling/Sliding
,”
ASME J. Tribol.
,
116
(
4
), pp.
751
761
.10.1115/1.2927329
11.
Hu
,
Y. Z.
, and
Zhu
,
D. A.
,
2000
, “
Full Numerical Solution to the Mixed Lubrication in Point Contacts
,”
ASME J. Tribol.
,
122
(
1
), pp.
1
9
.10.1115/1.555322
12.
Zhu
,
D.
, and
Hu
,
Y. Z.
,
2001
, “
Effects of Rough Surface Topography and Orientation on the Characteristics of EHD and Mixed Lubrication in Both Circular and Elliptical Contacts
,”
Tribol. Trans.
,
44
(
3
), pp.
391
398
.10.1080/10402000108982472
13.
Ai
,
X.
, and
Cheng
,
H. S.
,
1996
, “
The Effects of Surface Texture on EHL Point Contacts
,”
ASME J. Tribol.
,
118
(
1
), pp.
59
66
.10.1115/1.2837093
14.
Yang
,
P.
,
Cui
,
J.
,
Kaneta
,
M.
, and
Nishikawa
,
H.
,
2004
, “
Influence of a Surface Bump or Groove on the Lubricating Performance and Dimple Phenomena in Simple Sliding Point EHL Contacts
,”
ASME J. Tribol.
,
126
(
3
), pp.
466
472
.10.1115/1.1691434
15.
Zhao
,
J.
, and
Sadeghi
,
F.
,
2004
, “
The Effects of a Stationary Surface Pocket on EHL Line Contact Start-Up
,”
ASME J. Tribol.
,
126
(
4
), pp.
672
680
.10.1115/1.1759342
16.
Vincent
,
C.
,
Monteil
,
G.
,
Barriere
,
T.
, and
Gelin
,
J. C.
,
2008
, “
Control of the Quality of Laser Texturing
,”
Microsyst. Technol.
,
14
(
9–11
), pp.
1553
1557
.10.1007/s00542-008-0573-8
17.
Dumitru
,
G.
,
Romano
,
V.
,
Weber
,
H. P.
,
Sentis
,
M.
, and
Marine
,
W.
,
2002
, “
Femto Second Ablation of Ultrahard Materials
,”
Appl. Phys. A
,
74
(
6
), pp.
729
739
.10.1007/s003390101183
18.
Mourier
,
L.
,
Mazuyer
,
D.
,
Lubrecht
,
A. A.
,
Donnet
,
C.
, and
Audouard
,
E.
,
2008
, “
Action of a Femtosecond Laser Generated Micro-Cavity Passing Through a Circular EHL Contact
,”
Wear
,
264
(
5–6
), pp.
450
456
.10.1016/j.wear.2006.08.037
19.
Du
,
D.
,
He
,
Y. F.
,
Sui
,
B.
,
Xiong
,
L. J.
, and
Zhang
,
H.
,
2005
, “
Laser Texturing of Rollers by Pulsed Nd:YAG Laser
,”
J. Mater. Process. Technol.
,
161
(
3
), pp.
456
461
.10.1016/j.jmatprotec.2004.07.083
20.
Gao
,
Y.
,
Wu
,
B.
,
Zhou
,
Y.
, and
Tao
,
S.
,
2011
, “
A Two-Step Nanosecond Laser Surface Texturing Process With Smooth Surface Finish
,”
Appl. Surf. Sci.
,
257
(
23
), pp.
9960
9967
.10.1016/j.apsusc.2011.06.115
21.
Moshkovith
,
A.
,
Perfiliev
,
V.
,
Gindin
,
D.
,
Parkansky
,
N.
,
Boxman
,
R.
, and
Rapoport
,
L.
,
2007
, “
Surface Texturing Using Pulsed Air Arc Treatment
,”
Wear
,
263
(
7–12
), pp.
1467
1469
.10.1016/j.wear.2006.11.043
22.
Nakatsuji
,
T.
, and
Mori
,
A.
,
2001
, “
The Tribological Effect of Electrolytically Produced Micro-Pools and Phosphoric Compounds on Medium Carbon Steel Surfaces in Rolling—Sliding Contact
,”
Tribol. Trans.
,
44
(2), pp.
173
178
.10.1080/10402000108982444
23.
Wang
,
X.
, and
Kato
,
K.
,
2003
, “
Improving the Anti-Seizure Ability of SiC Seal in Water With RIE Texturing
,”
Tribol. Lett.
,
14
(4), pp.
275
280
.10.1023/A:1022650813314
24.
Zhang
,
J.
, and
Meng
,
Y.
,
2012
, “
A Study of Surface Texturing of Carbon Steel by Photochemical Machining
,”
J. Mater. Process. Technol.
,
212
(
10
), pp.
2133
2140
.10.1016/j.jmatprotec.2012.05.018
25.
Parreira
,
J. G.
,
Gallo
,
C. A.
, and
Costa
,
H. L.
,
2012
, “
New Advances on Maskless Electrochemical Texturing (MECT) for Tribological Purposes
,”
Surf. Coat. Technol.
,
212
, pp.
1
13
.10.1016/j.surfcoat.2012.08.043
26.
Schneider
,
Y. G.
,
1984
, “
Formation of Surfaces With Uniform Micro-Patterns on Precision Machine and Instrument Parts
,”
Precis. Eng.
,
6
(
4
), pp.
219
225
.10.1016/0141-6359(84)90007-2
27.
Wakuda
,
M.
,
Yamauchi
,
Y.
,
Kanzaki
,
S.
, and
Yasuda
,
Y.
,
2003
, “
Effect of Surface Texturing on Friction Reduction Between Ceramic and Steel Materials Under Lubricated Sliding Contact
,”
Wear
,
254
(
3–4
), pp.
356
363
.10.1016/S0043-1648(03)00004-8
28.
Pettersson
,
U.
, and
Jacobson
,
S.
,
2006
, “
Tribological Texturing of Steel Surfaces With a Novel Diamond Embossing Tool Technique
,”
Tribol. Int.
,
39
(
7
), pp.
695
700
.10.1016/j.triboint.2005.06.004
29.
Nakano
,
M.
,
Korenaga
,
A.
,
Korenaga
,
A.
,
Miyake
,
K.
,
Murakami
,
T.
,
Ando
,
Y.
,
Usami
,
H.
, and
Sasaki
,
S.
,
2007
, “
Applying Micro-Texture to Cast Iron Surfaces to Reduce the Friction Coefficient Under Lubricated Conditions
,”
Tribol. Lett.
,
28
(
2
), pp.
131
137
.10.1007/s11249-007-9257-2
30.
Greco
,
A.
,
Raphaelson
,
S.
,
Ehmann
,
K.
,
Wang
,
Q. J.
, and
Lin
,
C.
,
2009
, “
Surface Texturing of Tribological Interfaces Using the Vibromechanical Texturing
,”
ASME J. Manuf. Sci. Eng.
,
131
(
6
), pp.
1
8
.10.1115/1.4000418
31.
Samanek
,
O.
,
Zimmerman
,
M.
,
Svoboda
,
P.
,
Krupka
,
I.
, and
Vrbka
,
M.
,
2010
, “
Influence of Surface Texturing on Lubricant Film Formation and Surface Fatigue
,”
Eng. Mech.
,
17
, pp.
27
36
.
32.
Vrbka
,
M.
,
Krupka
,
I.
,
Svoboda
,
P.
,
Sperka
,
P.
,
Navrat
,
T.
,
Hartl
,
M.
, and
Nohava
,
J.
,
2011
, “
Effect of Shot Peening on Rolling Contact Fatigue and Lubricant Film Thickness Within Mixed Lubricated Non-Conformal Rolling/Sliding Contacts
,”
Tribol. Int.
,
44
(
12
), pp.
1726
1735
.10.1016/j.triboint.2011.06.019
33.
Cho
,
M. H.
, and
Park
,
S.
,
2011
, “
Micro CNC Surface Texturing on Polyoxymethylene (POM) and Its Tribological Performance in Lubricated Sliding
,”
Tribol. Int.
,
44
(
7–8
), pp.
859
867
.10.1016/j.triboint.2011.03.001
34.
Sudeep
,
U.
,
Tandon
,
N.
, and
Pandey
,
R. K.
,
2014
, “
Friction and Vibration Behaviors of Lubricated Laser Textured Point Contacts Under Reciprocating Rolling Motion With Highlights on the Used Laser Parameters
,”
Procedia Technol.
,
14
, pp.
4
11
.10.1016/j.protcy.2014.08.002
35.
Sudeep
,
U.
,
Tandon
,
N.
, and
Pandey
,
R. K.
,
2015
, “
Tribological Studies of Lubricated Laser Textured Point Contacts in Rolling/Sliding Reciprocating Motion With Investigations of Wettability and Nanohardness
,”
Tribol. Trans.
10.1080/10402004.2014.998357
36.
Bizi-Bandoki
,
P.
,
Benayoun
,
S.
,
Valette
,
S.
,
Beaugiraud
,
B.
, and
Audouard
,
E.
,
2011
, “
Modifications of Roughness and Wettability Properties of Metals Induced by Femto Second Laser Treatment
,”
Appl. Surf. Sci.
,
257
(
12
), pp.
5213
5218
.10.1016/j.apsusc.2010.12.089
37.
Valette
,
S.
,
Harzic
,
R. L.
,
Huot
,
N.
,
Audouard
,
E.
, and
Fortunier
,
R.
,
2005
, “
2-D Calculations of the Thermal Effects Due to Femto Second Laser–Metal Interaction
,”
Appl. Surf. Sci.
,
247
(
1–4
), pp.
238
242
.10.1016/j.apsusc.2005.01.080
38.
Gualtieri
,
E.
,
Borghi
,
A.
,
Calabri
,
L.
,
Pugno
,
N.
, and
Valeri
,
S.
,
2009
, “
Increasing Nanohardness and Reducing Friction of Nitride Steel by Laser Surface Texturing
,”
Tribol. Int. 42(5)
, pp.
699–705
.
10.1016/j.triboint.2008.09.008
39.
Mathiaa
,
T. G.
,
Pawlusb
,
P.
, and
Wieczorowskic
,
M.
,
2011
, “
Recent Trends in Surface Metrology
,”
Wear
,
271
(3–4), pp.
494
508
.10.1016/j.wear.2010.06.001
40.
Podsiadlo
,
P.
, and
Stachowiak
,
G. W.
,
2013
, “
Directional Multi-Scale Analysis and Optimization for Surface Textures
,”
Tribol. Lett.
,
49
(
1
), pp.
179
191
.10.1007/s11249-012-0054-1
41.
Stachowiak
,
G.
, and
Podsiadlo
,
P.
,
2008
, “
3-D Characterization, Optimization and Classification of Textured Surfaces
,”
Tribol. Lett.
,
32
(
1
), pp.
13
21
.10.1007/s11249-008-9354-x
42.
Dumont
,
M.
,
Lugt
,
P. M.
, and
Tripp
,
J. H.
,
2002
, “
Surface Feature Effects in Starved Circular EHL Contacts
,”
ASME J. Tribol.
,
124
(
2
), pp.
358
366
.10.1115/1.1403457
43.
Wang
,
Q. J.
, and
Zhu
,
D.
,
2005
, “
Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered Surfaces
,”
ASME J. Tribol.
,
127
(4), pp.
722
728
.10.1115/1.2000273
44.
Zhu
,
D.
,
Nanbu
,
T.
,
Ren
,
N.
,
Yasuda
,
Y.
, and
Wang
,
Q. J.
,
2010
, “
Model-Based Virtual Surface Texturing for Concentrated Conformal-Contact Lubrication
,”
Proc. IMechE Part J
,
224
(
8
), pp.
685
696
.10.1243/13506501JET739
45.
Ren
,
N.
,
Nanbu
,
T.
,
Yasuda
,
Y.
,
Zhu
,
D.
, and
Wang
,
Q.
,
2007
, “
Micro Textures in Concentrated-Conformal-Contact Lubrication: Effect of Distribution Patterns
,”
Tribol. Lett.
,
28
(
3
), pp.
275
285
.10.1007/s11249-007-9271-4
46.
Nanbu
,
T.
,
Ren
,
N.
,
Yasuda
,
Y.
,
Zhu
,
D.
, and
Wang
,
Q. J.
,
2008
, “
Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion
,”
Tribol. Lett.
,
29
(
3
), pp.
241
252
.10.1007/s11249-008-9302-9
47.
Organisciak
,
M.
,
Cavallaro
,
G.
, and
Lubrecht
,
A. A.
,
2007
, “
Variable Lubricant Supply of a Starved Hydrodynamic Linear Contact: Lubricant Lateral Flow for Smooth and Laser Textured Surfaces
,”
Proc. IMechE Part J
,
221
(
3
), pp.
247
258
.10.1243/13506501JET221
48.
Wang
,
Q. J.
,
Zhu
,
D.
,
Zhou
,
R.
, and
Hashimoto
,
F.
,
2008
, “
Investigating the Effect of Surface Finish on Mixed EHL in Rolling and Rolling–Sliding Contacts
,”
Tribol. Trans.
,
51
(
6
), pp.
748
761
.10.1080/10402000801888937
49.
Gao
,
L.
,
Yang
,
P.
,
Dymond
,
I.
,
Fisher
,
J.
, and
Zhongmin
,
J.
,
2010
, “
Effect of Surface Texturing on the Elastohydrodynamic Lubrication Analysis of Metal-on-Metal Hip Implants
,”
Tribol. Int.
,
43
(
10
), pp.
1851
1860
.10.1016/j.triboint.2010.02.006
50.
Mourier
,
L.
,
Mazuyer
,
D.
,
Lubrecht
,
A. A.
, and
Donnet
,
C.
,
2006
, “
Transient Increase of Film Thickness in Micro-Textured EHL Contacts
,”
Tribol. Int.
,
39
(
12
), pp.
1745
1756
.10.1016/j.triboint.2006.02.037
51.
Krupka
,
I.
, and
Hartl
,
M.
,
2007
, “
The Effect of Surface Texturing on Thin EHD Lubrication Films
,”
Tribol. Int.
,
40
(7), pp.
1100
1110
.10.1016/j.triboint.2006.10.007
52.
Krupka
,
I.
,
Koutny
,
D.
, and
Hartl
,
M.
,
2008
, “
Behavior of Real Roughness Features Within Mixed Lubricated Non-Conformal Contacts
,”
Tribol. Int.
,
41
(12), pp.
1153
1160
.10.1016/j.triboint.2008.02.005
53.
Krupka
,
I.
,
Vrbka
,
M.
, and
Hartl
,
M.
,
2008
, “
Effect of Surface Texturing on Mixed Lubricated Non-Conformal Contacts
,”
Tribol. Int.
,
41
(11), pp.
1063
1073
.10.1016/j.triboint.2007.11.016
54.
Krupka
,
I.
, and
Hartl
,
M.
,
2009
, “
Effect of Surface Texturing on Very Thin Film EHD Lubricated Contacts
,”
Tribol. Trans.
,
52
(1), pp.
21
28
.10.1080/10402000801911838
55.
Krupka
,
I.
,
Poliscuk
,
R.
, and
Hartl
,
M.
,
2009
, “
Behavior of Thin Viscous Boundary Films in Lubricated Contacts Between Micro-Textured Surfaces
,”
Tribol. Int.
,
42
(4), pp.
535
541
.10.1016/j.triboint.2008.03.013
56.
Mourier
,
L.
,
Mazuyer
,
D.
,
Ninove
,
F. P.
, and
Lubrecht
,
A. A.
,
2010
, “
Lubrication Mechanisms With Laser Surface Textured Surfaces in Elastohydrodynamic Regime
,”
Proc. IMechE Part J
,
224
(
8
), pp.
697
711
.10.1243/13506501JET771
57.
Krupka
,
I.
,
Hartl
,
M.
, and
Svoboda
,
P.
,
2010
, “
Effects of Surface Topography on Lubrication Film Formation Within Elastohydrodynamic and Mixed Lubricated Non-Conformal Contacts
,”
Proc. IMechE Part J.
,
224
(
8
), pp.
713
722
.10.1243/13506501JET657
58.
Krupka
,
I.
,
Svoboda
,
P.
, and
Hartl
,
M.
,
2010
, “
Effect of Surface Topography on Mixed Lubrication Film Formation During Start Up Under Rolling/Sliding Conditions
,”
Tribol. Int.
,
43
(
5–6
), pp.
1035
1042
.10.1016/j.triboint.2009.12.017
59.
Costa
,
H. L.
, and
Hutchings
, I
. M.
,
2007
, “
Hydrodynamic Lubrication of Textured Steel Surfaces Under Reciprocating Sliding Conditions
,”
Tribol. Int.
,
40
(
8
), pp.
1227
1238
.10.1016/j.triboint.2007.01.014
60.
Krupka
,
I.
,
Hartl
,
M.
,
Zimmerman
,
M.
,
Houska
,
P.
, and
Jang
,
S.
,
2011
, “
Effect of Surface Texturing on Elastohydrodynamically Lubricated Contact Under Transient Speed Conditions
,”
Tribol. Int.
,
44
(
10
), pp.
1144
1150
.10.1016/j.triboint.2011.05.005
61.
Andersson
,
P.
,
Koskinen
,
J.
,
Varjus
,
S.
,
Gerbig
,
Y.
,
Haefke
,
H.
, and
Georgiou
,
S.
,
2007
, “
Microlubrication Effect by Laser-Textured Steel Surfaces
,”
Wear
,
262
(
3–4
), pp.
369
379
.10.1016/j.wear.2006.06.003
62.
Nanbu
,
T.
,
Yasuda
,
Y.
,
Ushijima
,
K.
,
Watanabe
,
J.
, and
Zhu
,
D.
,
2008
, “
Increase of Traction Coefficient Due to Surface Micro-Texture
,”
Tribol. Lett.
,
29
(
2
), pp.
105
118
.10.1007/s11249-007-9287-9
63.
Wang
,
X.
,
Liu
,
W.
,
Zhou
,
F.
, and
Zhu
,
D.
,
2009
, “
Preliminary Investigation of the Effect of Dimple Size on Friction in Line Contacts
,”
Tribol. Int.
,
42
(
7
), pp.
1118
1123
.10.1016/j.triboint.2009.03.012
64.
Vilhena
,
L. M.
,
Sedlacek
,
M.
,
Podgornik
,
B.
,
Vizinti
,
J.
,
Babnik
,
A.
, and
Mozina
,
J.
,
2009
, “
Surface Texturing by Pulsed Nd:YAG Laser
,”
Tribol. Int.
,
42
(
10
), pp.
1496
504
.10.1016/j.triboint.2009.06.003
65.
Kovalchenko
,
A.
,
Ajayi
,
O.
,
Erdemir
,
A.
,
Fenske
,
G.
, and
Etsion
,
I.
,
2004
, “
The Effect of Laser Texturing of Steel Surfaces and Speed-Load Parameters on the Transition of Lubrication Regime From Boundary to Hydrodynamic
,”
Tribol. Trans.
,
47
(
2
), pp.
299
307
.10.1080/05698190490440902
66.
Kovalchenko
,
A.
,
Ajayi
,
O.
,
Erdemir
,
A.
, and
Fenske
,
G.
,
2011
, “
Friction and Wear Behavior of Laser Textured Surface Under Lubricated Initial Point Contact
,”
Wear
,
271
(
9–10
), pp.
1719
1725
.10.1016/j.wear.2010.12.049
67.
Podgornik
,
B.
,
Vilhena
,
M.
,
Sedlacek
,
M.
,
Rek
,
Z.
, and
Zun
,
I.
,
2012
, “
Effectiveness and Design of Surface Texturing for Different Lubrication Regimes
,”
Meccanica
,
47
(
7
), pp.
1613
1622
.10.1007/s11012-012-9540-7
68.
Sudeep
,
U.
,
Pandey
,
R. K.
, and
Tandon
,
N.
,
2013
, “
Effects of Surface Texturing on Friction and Vibration Behaviors of Sliding Lubricated Concentrated Point Contacts Under Linear Reciprocating Motion
,”
Tribol. Int.
,
62
, pp.
198
207
.10.1016/j.triboint.2013.02.023
69.
Sudeep
,
U.
,
Tandon
,
N.
, and
Pandey
,
R. K.
,
2013
, “
Influence of Surface Dimpling on Tribology of Lubricated Rolling/Sliding Point Contacts Subjected to Short Stroke Reciprocating Motion
,”
The 5th World Tribology Congress
, p. 699.
70.
Mo
,
J. L.
,
Wang
,
Z. G.
,
Chen
,
G. X.
,
Shao
,
T. M.
,
Zhu
,
M. H.
, and
Zhou
,
Z. R.
,
2013
, “
The Effect of Groove Textured Surface on Friction and Wear and Friction-Induced Vibration and Noise
,”
Wear
,
301
(
1–2
), pp.
671
681
.10.1016/j.wear.2013.01.082
71.
Wang
,
W.
,
Huang
,
Z.
,
Shen
,
D.
,
Kong
,
L.
, and
Li
,
S.
,
2013
, “
The Effect of Triangle-Shaped Surface Textures on the Performance of the Lubricated Point-Contacts
,”
ASME J. Tribol.
135
(
2
), p.
021503
.10.1115/1.4023206
72.
Sengu
,
D. S.
, and
Kim
,
S. S.
,
2013
, “
Influence on Friction Behavior of Micro-Texturing Under Lubricated Non-Conformal Contact
,”
Meccanica
,
49
(
2
), pp.
483
492
.
73.
Lopez-cervantes
,
A.
,
Dominguez-lopez
,
I.
,
Barceinas-Sanchez
,
J. D. O.
, and
Garcia
,
A. L. G.
,
2013
, “
Effects of Surface Texturing on the Performance of Biocompatible UHMWPE as Bearing Material During In Vitro Lubricated Sliding/Rolling Motion
,”
J. Mech. Behav. Biomed. Mat
,
20
, pp.
45
53
.10.1016/j.jmbbm.2012.12.010
74.
Pettersson
,
U.
, and
Jacobson
,
S.
,
2003
, “
Influence of Surface Texture on Boundary Lubricated Sliding Contacts
,”
Tribol. Int.
,
36
(
11
), pp.
857
864
.10.1016/S0301-679X(03)00104-X
75.
Voevodin
,
A. A.
, and
Zabinski
,
J. S.
,
2006
, “
Laser Surface Texturing for Adaptive Solid Lubrication
,”
Wear
,
261
(
11–12
), pp.
1285
1292
.10.1016/j.wear.2006.03.013
76.
Basnyat
,
P.
,
Luster
,
B.
,
Muratore
,
C.
,
Voevodin
,
A. A.
,
Haasch
,
R.
,
Zakeri
,
R.
,
Kohli
,
P.
, and
Aouadi
,
S. M.
,
2008
, “
Surface Texturing for Adaptive Solid Lubrication
,”
Surf., Coat. Technol
,
203
(
1–2
), pp.
73
79
.10.1016/j.surfcoat.2008.07.033
77.
Rapoport
,
L.
,
Moshkovich
,
A.
,
Perfilyev
,
V.
,
Gedanken
,
A.
,
Koltypin
,
Y.
,
Sominski
,
E.
,
Halperin
,
G.
, and
Etsion
,
I.
,
2009
, “
Wear Life and Adhesion of Solid Lubricant Films on Laser-Textured Steel Surfaces
,”
Wear
,
267
(
5–8
), pp.
1203
1207
.10.1016/j.wear.2009.01.053
78.
Chouquet
,
C.
,
Gavillet
,
J.
,
Ducros
,
C.
, and
Sanchette
,
S.
,
2010
, “
Effect of DLC Surface Texturing on Friction and Wear During Lubricated Sliding
,”
Mater. Chem. Phys.
,
123
(
2–3
), pp.
367
371
.10.1016/j.matchemphys.2010.04.016
79.
Hu
,
T.
,
Zhang
,
Y.
, and
Hu
,
L.
,
2012
, “
Tribological Investigation of MoS2 Coatings Deposited on the Laser Textured Surface
,”
Wear
,
278–279
, pp.
77
82
.10.1016/j.wear.2012.01.001
80.
Ze
,
W.
,
Jianxin
,
D.
,
Hui
,
Z.
,
Yunsong
,
L.
, and
Jun
,
Z.
,
2012
, “
Tribological Behavior of Textured Cemented Carbide Filled With Solid Lubricants in Dry Sliding With Titanium Alloys
,”
Wear
,
293
, pp.
135
143
.
81.
Amanov
,
A.
,
Watabe
,
T.
,
Tsuboi
,
R.
, and
Sasaki
,
S.
,
2013
, “
Improvement in the Tribological Characteristics of Si-DLC Coating by Laser Surface Texturing Under Oil-Lubricated Point Contacts at Various Temperatures
,”
Surf. Coat. Technol.
,
232
, pp.
549
560
.10.1016/j.surfcoat.2013.06.027
82.
Li
,
J.
,
Xiong
,
D.
,
Wu
,
H.
,
Zhang
,
Y.
, and
Qin
,
Y.
,
2012
, “
Tribological Properties of Laser Surface Texturing and Molybdenizing Duplex-Treated Stainless Steel at Elevated Temperatures
,”
Surf. Coat. Technol.
,
228
, pp.
219
223
.10.1016/j.surfcoat.2012.06.002
83.
Shum
,
P. W.
,
Zhou
,
Z. F.
, and
Li
,
K. Y.
,
2013
, “
Investigation of the Tribological Properties of the Different Textured DLC Coatings Under Reciprocating Lubricated Conditions
,”
Tribol. Int.
,
65
, pp.
259
264
.10.1016/j.triboint.2013.01.012
84.
Sadeghi
,
F.
,
Jalalahmadi
,
B.
,
Slack
,
T. S.
,
Raje
,
N.
, and
Arakere
,
N. K.
,
2009
, “
A Review of Rolling Contact Fatigue
,”
ASME J. Tribol.
,
131
(
4
), p.
041403
.10.1115/1.3209132
85.
Harris
,
T. A.
, and
Kotzalas
,
M. N.
,
2007
,
Rolling Bearing Analysis; Advanced Concepts of Bearing Technology
,”
5th ed.
,
CRC Press
, Boca Raton, FL.
86.
Olver
,
A. V.
,
2005
, “
The Mechanism of Rolling Contact Fatigue: An Update
,”
Proc. IMechE Part J
,
219
(
5
), pp.
313
330
.10.1243/135065005X9808
87.
Nakatsuji
,
T.
, and
Mori
,
A.
,
2001
, “
The Tribological Effect of Mechanically Produced Micro-Dents by a Micro Diamond Pyramid on Medium Carbon Steel Surfaces in Rolling-Sliding Contact
,”
Meccanica
,
36
(6), pp.
663
674
.10.1023/A:1016348803781
88.
Epstein
,
D.
,
Keer
,
L. M.
,
Wang
,
Q. J.
,
Cheng
,
H. S.
, and
Zhu
,
D.
,
2003
, “
Effect of Surface Topography on Contact Fatigue in Mixed Lubrication
,”
Tribol. Trans.
,
46
(
4
), pp.
506
513
.10.1080/10402000308982657
89.
Vrbka
,
M.
,
Samanek
,
O.
,
Sperka
,
P.
,
Navrat
,
T.
,
Krupka
,
I.
, and
Hartl
,
M.
,
2010
, “
Effect of Surface Texturing on Rolling Contact Fatigue Within Mixed Lubricated Non-Conformal Rolling/Sliding Contacts
,”
Tribol. Int.
,
43
(
8
), pp.
1457
1465
.10.1016/j.triboint.2010.02.002
90.
Vrbka
,
M.
,
Krupka
,
I.
,
Samanek
,
O.
,
Svoboda
,
P.
,
Vaverka
,
M.
, and
Hartl
,
M.
,
2011
, “
Effect of Surface Texturing on Lubrication Film Formation and Rolling Contact Fatigue Within Mixed Lubricated Non-Conformal Contacts
,”
Meccanica
,
46
(
3
), pp.
491
498
.10.1007/s11012-010-9288-x
91.
Greco
,
A.
,
Martini
,
A.
,
Liu
,
Y.
,
Lin
,
C.
, and
Wang
,
Q. J.
,
2010
, “
Rolling Contact Fatigue Performance of Vibro-Mechanical Textured Surfaces
,”
Tribol. Trans.
,
53
(
4
), pp.
610
620
.10.1080/10402000903518861
92.
Santus
,
C.
,
Beghini
,
M.
,
Bartilotta
,
I.
, and
Facchini
,
M.
,
2012
, “
Surface and Subsurface Rolling Contact Fatigue Characteristic Depths and Proposal of Stress Indexes
,”
Int. J. Fatigue
,
45
, pp.
71
81
.10.1016/j.ijfatigue.2012.06.012
93.
Nelias
,
D.
, and
Ville
,
F.
,
2000
, “
Detrimental Effects of Debris Dents on Rolling Contact Fatigue
,”
ASME J. Tribol.
,
122
(1), pp.
55
64
.10.1115/1.555329
94.
Varenberg
,
M.
,
Halperin
,
G.
, and
Etsion
,
I.
,
2002
, “
Different Aspects of the Role of Wear Debris in Fretting Wear
,”
Wear
,
252
(
11–12
), pp.
902
910
.10.1016/S0043-1648(02)00044-3
95.
Volchok
,
M.
,
Halperin
,
G.
, and
Etsion
,
I.
,
2002
, “
The Effect of Surface Regular Microtopography on Fretting Fatigue Life
,”
Wear
,
253
(
3–4
), pp.
509
515
.10.1016/S0043-1648(02)00148-5
96.
Jacobson
,
S.
,
Kalvesten
,
E.
, and
Pettersson
,
U.
,
2005
, “
Effect of Surface Textures in Highly Loaded Grease Lubricated Reciprocating Sliding Contacts
,”
ASME
Paper No. WTC2005-63222.10.1115/WTC2005-63222
97.
Jibiki
,
T.
,
Shima
,
M.
,
Motoda
,
T.
, and
Shipway
,
P.
,
2010
, “
Role of Surface Micro-Texturing in Acceleration of Initial Running-In During Lubricated Fretting
,”
Tribol. Online
,
5
(1), pp.
33
39
.10.2474/trol.5.33
98.
Wang
,
D. W.
,
Mo
,
J. L.
,
Ouyang
,
H.
,
Chen
,
G. X.
,
Zhu
,
M. H.
, and
Zhou
,
Z. R.
,
2014
, “
Experimental and Numerical Studies of Friction-Induced Vibration and Noise and the Effects of Groove-Textured Surfaces
,”
Mech. Syst. Signal Process.
,
46
(
2
), pp.
191
208
.10.1016/j.ymssp.2014.02.007
You do not currently have access to this content.