Carbon nanotubes (CNTs) with 10 nm average diameter and 5 μm in length were synthesized by electric arc discharge. The morphology and structure of CNTs were characterized by high resolution transmission electron microscopy (HRTEM) and X-ray powder diffraction. The tribological properties of CNTs as an additive on lithium grease were evaluated with a four ball tester. The results show that the grease with CNTs exhibit good performance in antiwear (AW) and decrease the wear scare diameter (WSD) about 63%, decrease friction reduction about 81.5%, and increase the extreme pressure (EP) properties and load carrying capacity about 52% with only 1% wt. of CNTs added to lithium grease. The action mechanism was estimated through analysis of the worn surface with a scanning electron microscope (SEM) and energy dispersive X-ray (EDX). The results indicate that a boundary film mainly composed of CNTs, Cr, iron oxide, and other organic compounds was formed on the worn surface during the friction process.
Skip Nav Destination
Article navigation
January 2015
Research-Article
Tribological Behavior of Carbon Nanotubes as an Additive on Lithium Grease
Alaa Mohamed,
Alaa Mohamed
Production Engineering and
Printing Technology Department,
Printing Technology Department,
Akhbar El Yom Academy
,Giza 12655
, Egypt
Mechanical Design and
Production Engineering Department,
Production Engineering Department,
Cairo University
,Giza 12655
, Egypt
Search for other works by this author on:
T. A. Osman,
T. A. Osman
Mechanical Design and
Production Engineering Department,
Production Engineering Department,
Cairo University
,Giza 12613
, Egypt
Search for other works by this author on:
A. Khattab,
A. Khattab
Mechanical Design and
Production Engineering Department,
Production Engineering Department,
Cairo University
,Giza 12613
, Egypt
Search for other works by this author on:
M. Zaki
M. Zaki
Production Engineering and
Printing Technology Department,
Printing Technology Department,
Akhbar El Yom Academy
,Giza 12613
, Egypt
Search for other works by this author on:
Alaa Mohamed
Production Engineering and
Printing Technology Department,
Printing Technology Department,
Akhbar El Yom Academy
,Giza 12655
, Egypt
Mechanical Design and
Production Engineering Department,
Production Engineering Department,
Cairo University
,Giza 12655
, Egypt
T. A. Osman
Mechanical Design and
Production Engineering Department,
Production Engineering Department,
Cairo University
,Giza 12613
, Egypt
A. Khattab
Mechanical Design and
Production Engineering Department,
Production Engineering Department,
Cairo University
,Giza 12613
, Egypt
M. Zaki
Production Engineering and
Printing Technology Department,
Printing Technology Department,
Akhbar El Yom Academy
,Giza 12613
, Egypt
Contributed by the Tribology Division of ASME for publication in the JOURNAL OF TRIBOLOGY. Manuscript received June 29, 2013; final manuscript received June 6, 2014; published online August 27, 2014. Assoc. Editor: Zhong Min Jin.
J. Tribol. Jan 2015, 137(1): 011801 (5 pages)
Published Online: August 27, 2014
Article history
Received:
June 29, 2013
Revision Received:
June 6, 2014
Citation
Mohamed, A., Osman, T. A., Khattab, A., and Zaki, M. (August 27, 2014). "Tribological Behavior of Carbon Nanotubes as an Additive on Lithium Grease." ASME. J. Tribol. January 2015; 137(1): 011801. https://doi.org/10.1115/1.4028225
Download citation file:
Get Email Alerts
Related Articles
Influence of Carbon Nanotubes on Conductive Capacity and Tribological Characteristics of Poly(ethylene Glycol-Ran-Propylene Glycol) Monobutyl Ether as Base Oil of Grease
J. Tribol (January,2016)
Facile Synthesis of Uniform Calcite Microcubes and Their Enhanced Tribological Performance in Lithium-Based Commercial Grease
J. Tribol (May,2019)
Novel Tribological Behavior of Hybrid MWCNTs/MLNGPs as an Additive on Lithium Grease
J. Tribol (July,2017)
Related Proceedings Papers
Related Chapters
The Tribological Character of LB Films of Dipalmitoylphosphatidylcholine (DPPC)
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Contact Laws
Contact in Structural Mechanics: A Weighted Residual Approach
Friction and Wear of Polymers and Composites
Tribology of Mechanical Systems: A Guide to Present and Future Technologies