Turbulent flow inside the seal chamber of a pump operating at high Reynolds number is investigated. The $K−ε$ turbulence model posed in cylindrical coordinates was applied for this purpose. Simulations are performed using the fractional approach method. The results of the computer code are verified by using the FLUENT and by comparing to published results for turbulent Taylor Couette flow. Numerical results of four cases including two rotational speeds with four flush rates are reported. Significant difference between the laminar and the turbulence flow in the seal chamber is predicted. The behavior of the turbulent flows with very high Reynolds number was also investigated. The physical and practical implications of the results are discussed.

1.
Clark
,
R.
, and
Azibert
,
H.
, 1997, “
Visualizing Fluid and Heat Transfer in Rotating Shaft Seals
,” BHR Group Conference Series Publication, San Francisco, CA, Vol.
26
, pp.
353
378
.
2.
Li
,
C. H.
, 1976, “
Thermal Deformation in a Mechanical Face Seal
,”
ASLE Trans.
0569-8197,
19
, pp.
146
152
.
3.
Morariu
,
Z.
, and
Pascovici
,
M. D.
, 1987, “
The Thermal Study of the Double Mechanical Seals
,”
Proc. 5th Conference on Friction Lubrication and Wear TRIBOTEHNICA 87
, London, Vol.
2
, pp.
319
327
.
4.
Buck
,
G. S.
, 1989, “
Heat Transfer in Mechanical Seals
,”
Proceedings 6th International Pump User Symposium
, Baton Rouge, LA, pp.
9
15
.
5.
Buck
,
G. S.
, 1999, “
Estimating Heat Generation, Face Temperature and Flush Rate for Mechanical Seals
,”
Proceedings PumpUsers Expo’99
,
, Baton Rouge, LA, pp.
167
172
.
6.
Doane
,
J. C.
, 1991, “
An Experimental-Computational Investigation of the Heat Transfer in Mechanical Face Seals
,”
Int. J. Heat Mass Transfer
0017-9310,
34
, pp.
1027
1041
.
7.
Lebeck
,
A. O.
, 1991,
Principles and Design of Mechanical Face Seals
,
Wiley
, New York.
8.
Jang
,
J. Y.
, and
Khonsari
,
M. M.
, 2003, “
A Generalized Thermoelastic Instability Analysis
,”
Proc. R. Soc. London, Ser. A
1364-5021,
459
, pp.
309
329
.
9.
Merati
,
P.
,
Okita
,
N. A.
,
Phillips
,
R. L.
, and
Jacobs
,
L. E.
, 1999, “
Experimental and Computational Investigation of Flow and Thermal Behavior of A Mechanical Seal
,”
Tribol. Trans.
1040-2004,
42
(
4
), pp.
731
738
.
10.
Parker
,
J.
, and
Merati
,
P.
, 1996, “
An Investigation of Turbulent Taylor-Couette Flow Using Laser Doppler Velocimetery in a Refractive Index Matched facility
,”
Trans. ASME
0097-6822,
118
, pp.
810
818
.
11.
Luan
,
Z. G.
, and
Khonsari
,
M. M.
, 2006, “
Numerical Simulations of the Flow Field Around the Rings of Mechanical Seals
,”
ASME J. Tribol.
0742-4787,
128
(
3
), pp.
559
565
.
12.
Luo
,
H.
,
Baum
,
J. D.
,
Lohner
,
R.
, and
Cabello
,
J.
, 1994, “
Implicit schemes and Boundary Conditions for compressible Flows on Unstructured Grids
,”
Proceedings AIAA 32nd Aerospace Science Meeting and Exhibit
, Reno, NV, pp.
10
13
.
13.
Biswas
,
G.
, and
Eswaram
,
V.
, 2002,
Turbulent Flows, Fundamentals, Experimental and Modeling
,
Narosa Publishing House
, New Delhi, India.
14.
Mathieu
,
J.
, and
Scott
,
J.
, 2000,
An Introduction to Turbulence Flow
,
Cambridge University Press
, New York.
15.
Launder
,
B. E.
, and
Spalding
,
D. B.
, 1974, “
The Numerical Computation of Turbulent Flows
,”
Comput. Methods Appl. Mech. Eng.
0045-7825,
3
, pp.
269
289
.
16.
Demartini
,
L. C.
,
Vielmo
,
H. A.
, and
Moller
,
S. V.
, 2004, “
Numeric and Experimental Analysis of the Turbulent Flow through a Channel with Baffle Plates
,”
J. Braz. Soc. Mech. Sci.
0100-7386,
XXVI
(
2
), pp.
153
159
.
17.
Va’zquez
,
M.
,
Houzeaux
,
G.
, and
Codina
,
R.
, 2000, “
Chimera Type Domain Decomposition Methods Applied to Fractional Step Finite Element Schemes For Incompressible Flows
,”
Proceedings European Congress on Computational Methods in Applied Sciences and Engineering
, Barcelona, Spain.
18.
Roberts
,
P. H.
, 1965, “
The Solution of the Characteristic Value Problem
,”
Proc. R. Soc. London, Ser. A
1364-5021,
283
, pp.
550
556
.
19.
Koschmieder
,
E. L.
, 1993,
Bernard Cells and Taylor Vortices
,
Cambridge University Press
, New York.