In this paper we report the experimental investigation to evaluate the published models for the contact of a deformable sphere against a hard flat in the fully plastic contact regime. A new measurement method has been used to measure the contact area. The behavior of the mean contact pressure and the contact area as a function of the contact load are presented. Substantial differences are found between the measurements and the model predictions. A constant value of the mean contact pressure as the load increases is observed, however, the value is lower than the hardness, as often reported. The contact area is found to be a simple truncation of the sphere by a hard flat.

1.
Greenwood
,
J. A.
, and
Williamson
,
J. B. P.
, 1966, “
Contact of Nominally Flat Surfaces
,”
Proc. R. Soc. London, Ser. A
1364-5021,
295
, pp.
300
319
.
2.
Abbott
,
E. J.
, and
Firestone
,
F. A.
, 1933, “
Specifying Surface Quality—A Method Based on Accurate Measurement and Comparison
,”
Mech. Eng. (Am. Soc. Mech. Eng.)
0025-6501,
55
, p.
569
.
3.
Chang
,
W. R.
,
Etsion
,
I.
, and
Bogy
,
D. B.
, 1987, “
An Elastic-Plastic Model for the Contact of Rough Surfaces
,”
ASME J. Tribol.
0742-4787,
109
, pp.
257
263
.
4.
Horng
,
J. H.
, 1998, “
An Elliptic Elastic-Plastic Asperity Microcontact Model for Rough Surface
,”
ASME J. Tribol.
0742-4787,
120
, pp.
82
88
.
5.
Zhao
,
Y.
,
Maietta
,
D. M.
, and
Chang
,
L.
, 2000, “
An Asperity Microcontact Model Incorporating the Transition from Elastic Deformation to Fully Plastic Flow
,”
ASME J. Tribol.
0742-4787,
122
, pp.
86
93
.
6.
Jeng
,
Y. R.
, and
Wang
,
P. Y.
, 2003, “
An Elliptical Microcontact Model Considering Elastic, Elastoplastic, and Plastic Deformation
,”
ASME J. Tribol.
0742-4787,
125
, pp.
232
240
.
7.
Vu-Quoc
,
L.
, and
Zhang
,
X.
, 1999, “
An Elastoplastic contact Force-Displacement Model in the Normal Direction: Displacement-Driven Version
,”
Proc. R. Soc. London, Ser. A
1364-5021,
455
, pp.
4013
4044
.
8.
Vu-Quoc
,
L.
,
Zhang
,
X.
, and
Lesburg
,
L.
, 2000, “
A Normal Force-Displacement Model for Contacting Spheres Accounting for Plastic Deformation: Force-Driven Formulation
,”
ASME J. Appl. Mech.
0021-8936,
67
, pp.
363
371
.
9.
Mesarovic
,
S. D.
, and
Fleck
,
N. A.
, 1999, “
Spherical Indentation of Elastic-Plastic Solids
,”
Proc. R. Soc. London, Ser. A
1364-5021,
455
, pp.
2707
2728
.
10.
Mesarovic
,
S. D.
, and
Fleck
,
N. A.
, 2000, “
Frictionless Indentation of Dissimilar Elastic-Plastic Spheres
,”
Int. J. Solids Struct.
0020-7683,
37
, pp.
7071
7091
.
11.
Li
,
L.-Y.
,
Wu
,
C.-Y.
, and
Thornton
,
C.
, 2002, “
A Theoretical Model for the Contact of Elastoplastic Bodies
,”
Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci.
0954-4062,
216
, pp.
421
431
.
12.
Kogut
,
L.
, and
Etsion
,
I.
, 2002, “
Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat
,”
ASME J. Appl. Mech.
0021-8936,
69
, pp.
657
662
.
13.
Jackson
,
R. L.
, and
Green
,
I.
, 2003, “
A Finite Element Study of Elasto-plastic Hemispherical Contact
,”
Proceeding of 2003 STLE/ASME Joint Tribology Conference
, 2003TRIB-268.
14.
Jackson
,
R. L.
, and
Green
,
I.
, 2005, “
A Finite Element Study of Elasto-Plastic Hemispherical Contact Against a Rigid Flat
,”
ASME J. Tribol.
0742-4787,
127
, pp.
343
354
.
15.
Sloetjes
,
J. W.
,
Schipper
,
D. J.
,
Lugt
,
P. M.
, and
Tripp
,
J. H.
, 2000, “
The Determination of Changes in Surface Topography Using Image Processing Techniques
,” in
Proceedings of the International Tribology Conference
,
Nagasaki
.
16.
Sloetjes
,
J. W.
,
Tasan
,
Y. C.
,
De Rooij
,
M. B.
, and
Schipper
,
D. J.
, 2002, “
Algorithm for Determining Changes in Micro-Geometry Using Image Processing Techniques
,” in
Proceedings of the 2nd Asia International Conference on Tribology
, Asiatrib ’02,
Cheju Island
, Korea.
17.
Johnson
,
K. L.
, 1968, “
An Experimental Determination of the Contact Stresses Between Plastically Deformed Cylinders and Spheres
,”
Engineering Plasticity
,
Cambridge University Press
,
Cambridge
, pp.
341
361
.
18.
Chaudhri
,
M. M.
, 1987, “
The Plastic Deformation of Single Asperities by Hard Flats
,”
Proc. Inst. Mech. Eng.
0020-3483,
158
, pp.
1003
1012
.
19.
Tabor
,
D.
, 1951,
The Hardness of Metals
,
Clarendon Press
,
Oxford, UK
.
20.
Chaudhri
,
M. M.
,
Hutchings
,
I. M.
, and
Makin
,
P. L.
, 1984, “
Plastic Compression of Spheres
,”
Philos. Mag. A
0141-8610,
49
, pp.
493
503
.
You do not currently have access to this content.