A plane isothermal elastohydrodynamic problem for a lubricated line contact is studied. The lubricant represented by a base stock with some polymer additive undergoes stress-induced degradation due to scission of polymer additive molecules. The polymer molecules have linear structure. The degradation process of a polymer additive dissolved in a lubricant while the lubricant passes through the contact is described by a kinetic equation. The kinetic equation is solved along the lubricant flow streamlines. The solution of the kinetic equation predicts the density of the probabilistic distribution of the polymer molecular weight versus polymer molecule chain length. The changes in the distribution of polymer molecules affect local lubricant properties. In particular, the lubricant viscosity changes as polymer molecules undergo scission. These irreversible changes in the lubricant viscosity alter virtually all parameters of the lubricated contact such as film thickness, frictional stresses and pressure. As a result of the polymer additive degradation the lubricant experiences a significant viscosity loss. The viscosity loss (up to 60 percent), in turn, leads to a noticeable reduction in the lubrication film thickness (up to 12 percent) and frictional stresses applied to contact surfaces in comparison with the case of a nondegrading lubricant. Moreover, the pressure distribution in degrading lubricants exhibits extremely sharp spikes of about 2.15 to 2.82 (depending on the slide-to-roll ratio) times greater than the maximum Hertzian pressure. That may lead to noticeable variations in fatigue life of the contact surfaces.
Modeling of Line Contacts With Degrading Lubricant
Contributed by the Tribology Division for publication in the ASME JOURNAL OF TRIBOLOGY. Manuscript received by the Tribology Division March 12, 2002 revised manuscript received October 8, 2002. Associate Editor: L. Chang.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Kudish , I. I., and Airapetyan, R. G. (June 19, 2003). "Modeling of Line Contacts With Degrading Lubricant ." ASME. J. Tribol. July 2003; 125(3): 513–522. https://doi.org/10.1115/1.1538193
Download citation file:
- Ris (Zotero)
- Reference Manager