Detailed formulations are presented for a mass-conserving, mode-based computational model which includes effects of structural inertia and surface roughness. Performance evaluation of a big end connecting rod hearing is shown to require only a few mode shapes, from which it is found that body forces arising from structural motion strongly influence film thickness history at operating engine speeds. Surface roughness effects on nominal film thickness are found to be small, even in assumed regions of partial lubrication.

1.
Boedo, S., 1995, “A Mass-Conserving Modal-Based Elastohydrodynamic Lubrication Model: Effects of Structural Body Forces, Surface Roughness, and Mode Stiffness Variation,” Ph.D. thesis, Cornell University, Ithaca, N.Y.
2.
Boedo, S., and Booker, J. F., 1995, “Body Force and Surface Roughness Effects in a Mass-Conserving Mode-based Elastohydrodynamic Lubrication Model,” Proc. 1995 International Tribology Conference, Yokohama, Japan, in press.
3.
Boedo, S., Booker, J. F., and Wilkie, M. J., 1995, “A Mass Conserving Modal Analysis for Elastohydrodynamic Lubrication,” Proc. 21st Leeds-Lyon Symposium on Tribology, Lubricants and Lubrication, D. Dowson, C. M. Taylor, T. H. C. Childs, and G. Dalmaz, eds., Elsevier, pp. 513–523.
4.
Bonneau
D.
,
Guines
D.
,
Freˆne
J.
, and
Toplosky
J.
,
1995
, “
EHD Analysis, Including Structural Inertia Effects and a Mass-Conserving Cavitation Model
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
117
, pp.
540
547
.
5.
Booker
J. F.
,
1989
, “
Basic Equations for Fluid Films with Variable Properties
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
111
, pp.
475
483
.
1.
Booker
J. F.
, and
Huebner
K. H.
,
1972
, “
Application of Finite Element Methods to Lubrication: An Engineering Approach
,”
ASME JOURNAL OF LUBRICATION TECHNOLOGY
, Vol.
94
, p.
313
313
.
2.
Errata
:
ASME JOURNAL OF LUBRICATION TECHNOLOGY
, Vol.
98
, Jan
1976
, p.
39
39
.
1.
Brewe
D. E.
,
1986
, “
Theoretical Modeling of Vapor Cavitation in Dynamically Loaded Journal Bearings
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
108
, pp.
628
638
.
2.
Elrod, H. G., and Adams, M. L., 1975, “A Computer Program for Cavitation and Starvation Problems,” Proc. 1st Leeds-Lyon Symposium on Tribology, Leeds, England, Cavitation and Related Phenomena in Lubrication, D. Dowson, M. Godet, and C. M. Taylor, eds., Mechanical Engineering Publications Ltd., pp. 37–41.
3.
Jones, G. J., 1983, “Crankshaft Bearings: Oil Film History,” Proc. 9th Leeds-Lyon Symposium on Tribology, Leeds, England, Tribology of Reciprocating Engines, D. Dowson, C. M. Taylor, M. Godet, and D. Berthe, eds., Butterworths, pp. 83–88.
4.
Knoll
G.
,
Lang
J.
, and
Riena¨cker
A.
,
1996
, “
Transient EHD Connecting Rod Analysis: Full Dynamic Versus Quasi-Static Deformation
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
118
, pp.
349
355
.
5.
Kumar
A.
, and
Booker
J. F.
,
1991
, “
A Finite Element Cavitation Algorithm
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
113
, pp.
276
286
.
6.
Kumar
A.
,
Goenka
P. K.
, and
Booker
J. F.
,
1990
, “
Modal Analysis of Elastohydrodynamic Lubrication: A Connecting Rod Application
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
112
, pp.
524
534
.
7.
LaBouff
G. A.
, and
Booker
J. F.
,
1985
, “
Dynamically Loaded Journal Bearings: A Finite Element Treatment for Rigid and Elastic Surfaces
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
107
, pp.
505
515
.
8.
Mclvor
J. D. C.
, and
Fenner
D. N.
,
1989
, “
Finite Element Analysis of Dynamically Loaded Flexible Journal Bearings: A Fast Newton-Raphson Method
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
111
, pp.
597
604
.
9.
Oh
K. P.
, and
Goenka
P. K.
,
1985
, “
The Elastohydrodynamic Solution of a Journal Bearing under Dynamic Loading
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
107
, pp.
389
395
.
10.
Olson, E. G., 1995, “A Finite Element Treatment of Hydrodynamic Lubrication with Structural Inertia and Elasticity,” Ph.D. thesis, Cornell University, Ithaca, NY.
11.
Paranjpe
R. S.
, and
Goenka
P. K.
,
1990
, “
Analysis of Crankshaft Bearings using a Mass Conserving Algorithm
,”
STLE Tribology Transactions
, Vol.
33
, pp.
333
344
.
12.
Patir
N.
, and
Cheng
H. S.
,
1978
, “
An Average Flow Model for Determining Effects of Three Dimensional Roughness on Partial Hydrodynamic Lubrication
,”
ASME JOURNAL OF LUBRICATION TECHNOLOGY
, Vol.
100
, p.
12
12
.
13.
Vijayaraghavan
D.
, and
Keith
T. G.
,
1990
, “
An Efficient, Robust, and Time Accurate Numerical Scheme Applied to a Cavitation Algorithm
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
112
, pp.
44
51
.
14.
Wilkie, M. J., 1991, “Generation of Modeshapes for Use in Modal Elastohydrodynamic Bearing Analysis,” Master of Engineering Design Project, Cornell University, Ithaca, NY, Dec., 1991.
15.
Zhu
D.
, and
Cheng
H. S.
,
1988
, “
Effect of Surface Roughness on the Point Contact EHL
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
110
, pp.
32
37
.
This content is only available via PDF.
You do not currently have access to this content.