This paper describes a novel experimental procedure for measuring the four velocity or damping coefficients of an Oil Film Journal Bearing from imposed dynamic orbits. All four damping coefficients are derived from one imposed journal center dynamic orbit and, therefore, may be regarded as being obtained at the same time. The method requires the production of a “figure of eight” shaped orbit and utilizes the “cross-over” point therein. Coefficients are initially evaluated in a coordinate system which is chosen to align with the designated parts of the measured orbit. Each coefficient is then separately evaluated from single values of instantaneous imposed force and resulting journal center velocity. Coefficients are then converted into any other desired axes system. All the benefits of the original selected orbit technique are retained. The presented method places much less severe demands on experimental procedure. An available example illustrates the technique. A realistic uncertainty analysis for this example is included. Indications are provided which show how the orbit features may be adjusted to substantially reduce uncertainty.

1.
Brockwell, K. R., and Dmochowski, W., 1989, “Experimental Determination of the Journal Bearing Oil Film Coefficients by the Method of Selective Vibration Orbits,” Proceedings of the 12th Biennial ASME Conference on Mechanical Vibration and Noise, Montreal, pp. 251–259.
2.
Jeffrey, A., 1985, Mathematics for Engineers and Scientists, 3rd edition, Van Nostrand Reinhold (UK) Ltd. Wokingham, Berkshire, England, pp. 701–702.
3.
Parkins
D. W.
,
1979
, “
Theoretical and Experimental Determination of the Dynamic Characteristics of a Hydrodynamic Journal Bearing
,”
ASME JOURNAL OF LUBRICATION TECHNOLOGY
, Vol.
101
, pp.
129
139
.
4.
Parkins
D. W.
,
1981
, “
Measured Characteristics of a Journal Bearing Oil Film
,”
ASME JOURNAL OF LUBRICATION TECHNOLOGY
, Vol.
103
, pp.
120
125
.
5.
Parkins, D. W., 1990, “Description and Appraisal of Some Techniques for the Measurement of the Static and Dynamic Characteristics of Hydrodynamic Journal Bearings,” Proceedings of the International Conference, Hydrodynamic Bearings—Rotor System Dynamics, 17-21 Sept., Xi’an Jiao-tong University, Xian 710049, China, pp. 26–32.
6.
Parkins
D. W.
, and
Horner
D.
,
1993
, “
Tilting Pad Journal Bearings—Measured and Predicted Stiffness Coefficients
,”
STLE Tribology Transactions
, Vol.
36
, pp.
359
366
.
This content is only available via PDF.
You do not currently have access to this content.