An EHL approach to the rib-roller end contact in tapered roller bearings has been achieved by taking into account the non-Newtonian behavior of lubricants and thermal effects and with full consideration of the peculiar geometrical and kinematic conditions. Two kinds of geometrical configurations of rib and roller end were investigated: tapered rib/spherical roller end and spherical rib/spherical roller end. Optimal ratios of curvature radius of roller end to rib face were deduced. The film thickness, friction torque, lubricant temperature, and surface temperature at various speeds and loads were calculated.

1.
Aramaki
H.
,
Cheng
H. S.
, and
Zhu
D.
,
1992
, “
Film Thickness, Friction, and Scuffing Failure of Rib/Roller End Contacts in Cylindrical Roller Bearings
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
114
, pp.
311
316
.
2.
Bair
S.
, and
Winer
W. O.
,
1979
, “
A Rheology Model for EHD Contacts Based on Primary Laboratory Data
,”
ASME JOURNAL OF LUBRICATION TECHNOLOGY
, Vol.
101
, pp.
258
265
.
3.
Carslaw, H. S., and Jaeger, J. C., 1959, Conduction of Heal in Solids, Oxford University Press.
4.
Chittenden
R. J.
,
Dowson
D.
,
Dunn
J. F.
, and
Taylor
C. M.
,
1985
, “
A Theoretical Analysis of the Isothermal Elastohydrodynamic Lubrication of Concentrated Contacts, I. Direction of Lubricant Entrainment Coincident with the Major Axis of the Hertzian Contact Ellipse
,”
Proc. R. Soc. (London)
, Series A
397
, pp.
245
269
.
5.
Dalmaz, G., Tessier, J. F., and Dudragne, G., 1980, “Friction Improvement in Cycloidal Motion Contact: Rib-Roller End Contact in Tapered Roller Bearings,” Proc. 7th Leeds-Lyon Symp. on Tribology, VII (iii), pp. 175.
6.
Dowson, D., and Higginson, G. R., 1977, Elastohydrodynamic Lubrication, SI Ed., Pergamon, Oxford.
7.
Gadallah
N.
, and
Dalmaz
G.
,
1984
, “
Hydrodynamic Lubrication of the Rib-Roller End Contact of a Tapered Roller Bearing
,”
ASME Journal of Tribology
, Vol.
106
, pp.
265
274
.
8.
Hamrock, B. J., and Dowson, D., 1981, Ball Bearing Lubrication, the Elastohydrodynamics of Elliptical Contacts, Wiley, New York.
9.
Jamison
W. E.
,
Kauzlarich
J. J.
, and
Mochel
E. V.
,
1977
, “
Geometric Effects on the Rib-Roller Contact in Tapered Roller Bearings
,”
ASLE Trans.
, Vol.
20
, pp.
79
88
.
10.
Jiang, X. F., Wong, P. L., Qiu, X. J., and Zhang, Z. M., 1993, “Effects of Non-Newtonian Model and New Viscosity-Pressure Law on EHD Lubrication of Rib-Roller End Contact in Tapered Roller Bearings,” Proc. of the International Symposium on Tribology ’93, Tsinghua University, Beijing, China, pp. 147–154.
11.
Johnson
K. L.
, and
Tevaarwerk
J. L.
,
1977
, “
Shear Behavior Elastohydrodynamic Oil Films
,”
Proc. R. Soc. (London)
, Series A
356
, pp.
215
236
.
12.
Korrenn, H., 1970, “Gleitreibung und Grenzbelastung an den Bord-flachen von Kegelrollenlagern,” Fortschritt Berichte, V.D.I. Zeitschrift, Ser. 1, Vol. 11.
13.
Roelands, C. J. A., 1966, “Correlational Aspects of the Viscosity-Temperature-Pressure Relationship of Lubricating Oils,” V.R.B., Groningen, Netherlands.
14.
Wang
S. H.
, and
Zhang
H. H.
,
1987
, “
Combined Effects of Thermal and Non-Newtonian Character of Lubricant on Pressure, Film Profile, Temperature Rise, and Shear Stress in E.H.L.
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
109
, pp.
666
670
.
15.
Zhang
Z.
,
Qiu
X.
, and
Hong
Y.
,
1988
, “
EHL Analysis of Rib-Roller End Contact in Tapered Roller Bearings
,”
STLE Trans.
, Vol.
31
, pp.
461
467
.
16.
Zhou
R. S.
, and
Hoeprich
M. R.
,
1991
, “
Torque of Tapered Roller Bearings
,”
ASME JOURNAL OF TRIBOLOGY
, Vol.
113
, pp.
590
597
.
This content is only available via PDF.
You do not currently have access to this content.