Modern consumer electronic trends point to a demand for thinner and more portable electronic devices. Conventional cooling systems of these portable electronic devices are challenging to miniaturize in thin profile applications that are typically on the order of several millimeters in thickness. In order to overcome some of these challenges, a synthetic jet, which is also considered as micro fluidic device, is developed. This device which operates based on Piezo electricity is called Dual Cooling Jet (DCJ). DCJ disturbs the boundary layer over a hot component and hence increases heat transfer compare to conventional blower. DCJ is typically defined as a device using a partially enclosed cavity with oscillating walls/diaphragms to create alternating suction and ejection of fluid across an interface or orifice. In this work, the results of cooling performance investigation of DCJ are shown and compared with natural convection cooling. Also, several experiments have been done to study the cooling effect of DCJ at different configuration with respect to heat source and the results are compared. At the end, the effects of heat source size is investigated which are helpful to understand how effective DCJ is when used for cooling several size chips. In addition, the results of this work show that DCJ can be combined with low profile heat sink as a promising next generation ultra thin thermal solution module.

References

References
1.
De Bock
,
H. P. J.
,
Jackson
,
J. L.
,
Whalen
,
B. P.
, and
Chamarthy
,
P.
,
2012
, “
Experimental Flow Performance Evaluation of Novel Miniaturized Advanced Piezoelectric Dual Cooling Jet
,”
J. Phys.: Conf. Ser.
,
395
, p.
012035
.
2.
Smith
,
B. L.
, and
Glezer
,
A.
,
1998
, “
The Formation and Evolution of Synthetic Jets
,”
Physics Fluids
,
10
(
9
), pp.
2281
2297
3.
Garg
,
J.
,
Arik
,
M.
,
Weaver
,
S.
, and
Saddoughi
,
S.
,
2004
, “
Micro Fluidic Jets for Thermal Management of Electronic
,”
Proceedings of ASME Heat Transfer/Fluids Engineering Summer Conference
,
Charlotte, NC
, FED F-346, July 11–15.
4.
Mahalingam
,
R.
, and
Glezer
,
A.
,
2005
, “
Design and Thermal Characteristics of a Synthetic Jet Ejector Heat Sink
,”
ASME J. Electron. Packag.
,
127
, pp.
172
177
.10.1115/1.1869509
5.
Noska
,
B.
,
Che
,
C.
,
Jin
,
H.
, and
Mahalingam
,
R.
,
2010
, “
Enabling New LED Designs Through Advanced Cooling Technology
,”
Proceedings of Semiconductor Thermal Measurement and Management Symposium 2010
,
Semi-Therm, Santa Clara, CA
, February 23–24.
6.
de Bock
,
H. P.
,
Chamarthy
,
P.
,
Jackson
,
J. L.
, and
Whalen
,
B.
,
2012
, “
Investigation and Application of an Advanced Dual Piezoelectric Cooling Jet to a Typical Electronics Cooling Configuration
,”
13th IDDD ITHERM Conference of Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM)
.
7.
Arik
,
M.
, and
Utturkar
,
Y.
,
2008
, “
Interaction of a Synthetic Jet With an Actively Cooled Heat Sink
,”
Proceedings of the Intersociety Conference on Thermal and Thermo Mechanical Phenomena
,
Itherm, Orlando, FL
.
8.
Utturkar
,
Y.
,
Arik
,
M.
, and
Gursoy
,
M.
,
2006
, “
An Experimental and Computational Sensitivity Analysis of Synthetic Jet Cooling Performance
,”
IMECE2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006-13743
,
Chacago, IL
, November 5–10.
9.
Bar-Cohen
,
A.
,
Arik
,
M.
, and
Ohadi
,
M.
,
2006
, “
Direct Liquid Cooling of High Flux Micro and Nano Electronic Components
,”
Proceedings of the IEEE 94:48
, pp.
1549
1570
.
10.
Seeley
,
C.
,
Utturkar
,
Y.
,
Arik
,
M.
, and
Icoz
,
T.
,
2011
, “
Fluid Structure Interaction Model for Low Frequency Synthetic Jets
,”
AIAA J.
,
49
(2), pp.
316
323
.10.2514/1.J050433
11.
Utturkar
,
Y.
,
Rampunggoon
,
R.
, and
Cattafesta
,
L.
,
2002
, “
Sensitivity of Synthetic Jets to the Design of the Jet Cavity
,”
AIAA 40th Aerospace Sciences Meeting and Exhibition
, AIAA 2002–2014.
12.
Timchenko
,
V.
,
Reizes
,
J.
, and
Leonardi
,
E.
,
2004
, “
A Numerical Study of Enhanced Micro Channel Cooling Using a Synthetic Jet Actuator
,”
15th Australian Fluid Mechanics Conference
,
Australia
.
13.
Arik
,
M.
, and
Utturkar
,
Y.
,
2007
, “
Interaction of Synthetic Jet Cooling Performance With Gravity and Buoyancy Driven Flows
,”
Proceedings of International Packaging Conference, IPACK2077
,
Vancouver, BC, Canada
.
You do not currently have access to this content.