Abstract
A novel three-dimensional numerical simulation model for the helix ground heat exchanger was proposed in this paper, which takes into account unsaturated soil properties. This model is more suitable for real working conditions. To validate its accuracy, a miniature model heat transfer experimental platform was constructed. Additionally, the study conducted simulation research using three types of soil with significantly different thermal and moisture characteristics. Moreover, the comprehensive thermal conductivity and water diffusion coefficient of these three soil types were determined by relevant literature and experimental tests. The aim was to comprehensively explore the impact of different soil types on the heat and mass transfer of the helix ground heat exchanger. The results indicate that the numerical model developed in this paper accurately captures the heat and mass transfer characteristics of the helix ground heat exchanger to a certain extent. Increasing the comprehensive thermal conductivity and water diffusion coefficient of the soil can significantly enhance the heat exchange capacity of the exchanger. For instance, under sandy loam conditions, the heat exchange capacity is approximately 20.73% higher compared to clay loam conditions. The study also identifies two distinct areas around the helix ground heat exchanger: the severe change region and the soft change region. In the severe change region, there is a notable decrease in soil water content near the exchanger, which inevitably weakens the thermal conductivity of the soil. It is advised to minimize this effect through measures like active water spraying.
