... neem fiber weight fraction than with an increase in the banyan fiber weight fraction. The scanning electron microscopy surface morphological analysis revealed the dominant mode of failure in the hybrid composites. 26 07 2018 14 12 2018 26 02 2019 tensile testing impact testing...

... varying material responses to changes in specimen geometry. 22 11 2017 03 05 2018 01 10 2018 metal sheet steel stamping tensile testing size effect References Van Musschenbroek , P. , Essai de Physique , Vol. 1, S. Luchtmans, Leyden , the Netherlands , 1739...

...) and reduced graphene oxide (RGO) at a loading of 0 to 0.5 wt. %. A soft molding method was used for the preparation of epoxy nanocomposites. The reinforcing effects of GNP and RGO on epoxy resin were examined by tensile testing and dynamic mechanical analysis (DMA). The morphology of the epoxy/GO and epoxy...

... 691). 16 01 2004 03 08 2004 06 12 2004 polymer matrix composites tensile testing modulus strength failure strain precision statistics repeatability reproducibility interlaboratory testing This paper has been modified from the original to correct the pagination...

... case. The results show that careful calibration of every testing machine and, in some cases, finite element modeling of the tests, are essential to give a similar curve for the same nominal deformation conditions. 11 09 2000 23 05 2001 high temperature tensile testing axisymmetric...

...KC Liu; JL Ding Design and development of a simple mechanical strain extensometer for high-temperature tensile testing of ceramic materials are described. The extensometer uses the lever-arm concept to proportionally reproduce the displacements of fiducial gage marks defined on a specimen. Various...

...TP Lennon; V Srisamang A new cutting device has been developed for preparing condom ring specimens for tensile testing. The cutting apparatus requires minimal training and produces a consistent specimen. The device, consisting of a die with replaceable blades and a μg for holding the condom...

...JZ Gyekenyesi; PA Bartolotta A series of tensile tests were conducted on SiC RBSN composites using different methods of strain measurement. The tests were used to find the optimum strain sensing device for use with continuous fiber reinforced ceramic matrix composites in ambient and high...

... Department of the Indian Institute of Science to explore the feasibility of utilizing the acoustic emission technique for evaluation of bond strength of bimetallic strips. As a first step, acoustic emission was monitored during tensile testing of copper-lead bimetallic strips. The results obtained during...