...Ravi Datt Yadav; Vijay Gautam ABSTRACT This paper discusses the effect of magnetic fields on the tensile properties of high-strength carbon-manganese steel sheets in uniaxial tension. An electromagnetic tool was designed and fabricated such that it produced a constant magnetic field of 0.35 T...

... parts in applications where they would otherwise be beneficial. Some of this reluctance might be assuaged if the actual property variability was better known. Here, we examine the literature of metal AM tensile property data to quantify variability in the metal AM process and compare...

...T. R. Prabhu The influence of deformation strain on the tensile properties of the forged bar was studied in the present study. An aerospace structural Al alloy (AA 2014) was selected for the experiments. In order to understand the strain distribution inside the forged bar, the forging process...

... analysis. 13 01 2014 27 08 2015 17 11 2015 ring tensile specimen tensile properties transverse material stress-strain curve Zircaloy-2 pressure tube material anisotropy in mechanical properties nonlinear finite element analysis References Arsène , S. and Bai...

... Ghosh , M. , Kumar , K. , Kailas , S. V. , and Ray , A. K. , “ Optimization of Friction Stir Welding Parameters for Dissimilar Aluminum Alloys ,” Mater. Des. Vol. 31 , 2010 , pp. 3033 – 3037 . Sato , Y. S. and Kokawa , H. , “ Distribution of Tensile Property...

... from accelerated cured (AC) specimens to predict tensile properties of SHCC material under NC. The tensile test result from AC specimens has been validated with that from NC specimens with reasonable agreement. This makes it possible to use AC tensile test result to predict that from NC condition...

... , Vol. 33 , No. 4 , 2005 , pp. 282 – 289 . small punch test aluminum alloys material characterization tensile properties 15 08 2010 17 04 2011 24 05 2011 This paper has been modified from the original to correct the pagination. No other material has been changed...

... to produce two different γ′ precipitate sizes, i.e., 0.3 μm and 0.5 μm, respectively. The tensile properties of these materials were evaluated at room and elevated temperatures in ambient atmosphere as per ASTM E 21, Test Methods for Elevated Temperature Tension Tests of Metallic Materials. The results...

...JO Ukponmwan The tensile properties of cotton and polyester-cotton woven fabrics have been analyzed in terms of the breaking load, breaking extension, breaking elongation, and elongation at 1 kg (1% full-scale-deflexion (FSD)) using the Instron Tensile Tester, Model 1026. Changes in tensile...

... the properties sensitive to direction are strength, ductility, and fracture toughness. In this study, the Double Ligament Tensile (DLT) test was used to evaluate the tensile properties and anisotropy of premium quality cast hypoeutectic and hypereutectic aluminum-silicon alloys of cylindrical cross section...

... Spectrum Load Effects ,” AFWAL TR 81-3092 , Vol. 1 , Rockwell International , 11 1981 . beryllium hardness cracking (fracturing) tensile properties corrosion hot-pressed beryllium fracture toughness short rod testing Darrell D. Lemon 1and William F. Brown, Jr. 2 Fracture Toughness...

.... metal sheets lasers tensile properties References Cohen , M. I. , “ Materials Processing ,” in Laser Handbook , Vol. 2 , Arecchi   F. T. and Schule-Dubois   E. O. , Eds., North Holland Publishing Co. , Amsterdam , 1972 , pp. 1577 - 1647 . Breinan , E. M...

... in recognition that the only absolute guarantee of properties is achievable through destructive tests. This paper presents an evaluation of tensile properties and their relationships to physical parameters for A357-T6 castings as an attempt to improve product assurance through nondestructive inspections...

... the effect of low temperatures (at least the lowest service temperature) on the mechanical properties of materials in the codes and standards used for selecting steels for use in the Arctic. pipelines low temperature tests steels aging tensile properties fatigue (materials) ductility...

... formability steels strain hardening exponent strain ratio tensile properties tension test tinplate ultimate strength yield strength D. C. Ludwigson 1 A Rapid Test for the Assessment of Steel Sheet and Tinplate Properties REFERENCE: Ludwigson, D. C., "A Rapid T~t for the Au~mment of Steel Sheet...

... reinforcements adhesion tensile properties shear filament winding short beam flexural strength fiberglass H. S. Loveless ~and J. H. Ellis ~ A Comparison of Methods for Determining the Shear Properties of Glass/Resin Unidirectional Composites REFERENCE: Loveless, H. S. and Ellis, J. H., " A Comparison...

... aluminum tensile properties yield strength ultimate tensile strength elongation strain-hardening coefficient Reed-Hill coefficient References Olshausen , K. D. , “ An Electronic Processing System for Data from Post-Irradiation Examination of Fuel Elements ,” Atomkernenergie   0004-7147...

... of the flaments. The method eliminates the requirements of obtaining a compliance calibration of the testing machine and has the advantage of facilitating measurements of small strains in filaments having very high stiffness. fibers mechanical properties strain gages tensile properties elastic properties...

... the surface energy. It is observed that the second phase content is a single valued function of the ductile-brittle transition temperature. ferritic stainless steels iron alloys chromium interstitials second phase content tensile properties cleavage fracture evaluation References Binder...

... temperature tensile and fatigue behavior were found. Fatigue lifetime was seen to be dependent upon grain size, particularly at lower strain ranges. Inconel® fatigue (materials) tensile properties mechanical properties References Eiselstein , H. L. , “ Metallurgy of Columbium-Hardened...