...Tharmaraj Ramakrishnan; Joseph Davidson Maharajan; Jeremiah Raveendran ABSTRACT Formability is the measure of deformity a workpiece can endure from the created stresses inside the substance before the crack event. The investigation of the formability of powder metallurgy (PM) parts plays...

...Rasoul Safdarian Because of weight and manufacturing cost decrease, tailor welded blanks (TWBs) have great usage in different industries such as the automotive and aircraft industries. Despite the wide use of TWBs in various industries, there are some drawbacks in the formability of these blanks...

... , 2016 , pp.  983 – 994 , https://doi.org/10.1520/JTE20150320 strength coefficient height-to-diameter ( h / d ) ratios friction anisotropy ductile fracture formability 23 06 2016 30 01 2017 10 11 2017 Journal of Testing and Evaluation doi:10.1520/JTE20160591 / Vol...

...V. Satheeshkumar; R. Ganesh Narayanan The formability of adhesive bonded steel sheets is experimentally evaluated and predicted with the influence of carbon black (CB) nano powder filled adhesive. The epoxy adhesive properties are modified by filling CB nano powder at different wt. %. The tensile...

...Emine Feyza Şükür; Mevlüt Türköz; Murat Dilmeç; Hüseyin Selçuk Halkacı; Mehmet Halkacı The deformation behavior of sheet materials changes according to temperature. It is possible that the formability of a material for different temperatures is investigated and the flow curves are obtained by using...

...C. Hari Krishna; M. J. Davidson; C. Nagaraju; P. Ramesh Kumar An effective lubricant will always enhance the formability of a material when applied at the die–billet interface in cold upsetting processes. High friction at the die–billet interface leads to adhesion of the cylindrical billets...

... formability steels strain hardening exponent strain ratio tensile properties tension test tinplate ultimate strength yield strength D. C. Ludwigson 1 A Rapid Test for the Assessment of Steel Sheet and Tinplate Properties REFERENCE: Ludwigson, D. C., "A Rapid T~t for the Au~mment of Steel Sheet...

... in the Swift test, but also to compare two processes using the same material, which has hitherto been impossible. formability drawability stretch forming sheet metal metal forming ductility testing noncircular cups square cups draw-in forming limit residual flange largest drawing ratio...

... are offered. Recommendations for use of the materials, application of preferred thickness measuring methods, and acceptance of corrosion resistance qualifying criteria are presented. steels galvanized materials sinc coatings formability sinc alloys corrosion resistance welding coating thickness...

... the strains are coaxial, and used in unsymmetrical ones, in which the strains are noncoaxial, then the formability will appear to be overestimated. A test for coaxiality, based on the use of squares and parallelograms for the strain measurements, is presented in the text and the formula used is derived...

...PK Lee; TC Hsu An attempt is made to define formability quantitatively. Owing to the complexity of the concept of formability, it is analysed and four aspects of formability are distinguished. They are: the formability of the material at a critical section, the formability of the material...