..., the different damage mechanisms were correlated with the scanning electron microscopy images. The results provided evidence that the hybridization of natural fiber composites can be a suitable material for the application of impact loading at elevated temperatures. E-mail: [email protected] ASTM...

...Mehboob Rasul; Shamsad Ahmad; Saheed Kolawole Adekunle; Salah U. Al-Dulaijan; Mohammed Maslehuddin; Syed Imran Ali This article presents the results of an experimental study conducted to assess the effect of sustained elevated temperature on the mechanical properties of ultrahigh performance...

... of the results, it has been demonstrated that the stresses on the soil particles change from tensile to compressive while the strains are insignificant. It is believed that such a study would be quite useful in predicting the response and engineering properties of soils at elevated temperatures. 26 03 2013...

... materials such as optical fibers. 05 03 2006 17 01 2007 19 04 2007 fatigue Ni-base foil strain elevated temperature References Vanswijgenhoven , E. and Holmes , J.W. , “ Fatigue Crack Growth in Inconel 718 Superalloy Foil at Elevated Temperature ,” 5th...

..., elevated temperature, error Introduction Access to accurate materials property values is essential in design. Components are nowadays many times optimized with the aid of computer methods that further enhance the need for data. All design values are originally based on experimental data. These data can...

...A Sengupta; SK Putatunda Tensile behavior of a new single crystal nickel-based superalloy with rhenium (CMSX-4) was studied at both room and elevated temperatures in two different heat-treated conditions. Detailed fractographic studies were carried out to determine the micromechanism of crack...

...LB Blackburn A technique has been developed for elevated temperature tensile testing of foil-gage metals which employs a modified mechanical extensometer in conjunction with a displacement transducer. The extensometer has been modified by attachment of a counterbalance to reduce the axial load...

... unpredictable fashion. 06 12 1985 21 04 1986 elevated temperature low cycle fatigue diametral strain response Poisson's ratio 1Cr-1Mo-0.3V rotor steel cavitation References ASME Boiler and Pressure Vessel Code/Sections III and VIII , American Society of Mechanical Engineers...

... , pp. 186 - 191 . Okazaki , M. and Mutoh , Y. in Proceedings , Symposium on Fatigue , The Society of Materials Science , Japan , 1983 . fatigue elevated temperature Alloy 718 electron beam welding Juichi Fukakura 1 and Tadao Mori I Estimation of Fatigue Life...

.... A four zone furnace has been developed for elevated temperature tests, while allowing strains to be measured from the gauge length. cyclic loads temperature control extensometers fatigue tests elevated temperature plastic deformation strain measurement temperature measurement test specimens...

..., and the stroke signal is adjusted to correct any drift in the axial strain signal. Tests have been conducted to demonstrate the viability of such a procedure. fatigue tests axial strain frequency distribution high-cycle fatigue strain-controlled test elevated temperature References Soo , P...

...WJ Ostergren A new approach is developed for predicting strain-controlled, low cycle fatigue life at elevated temperature using a proposed energy measure of fatigue damage. This measure of damage, defined as the net tensile hysteretic energy of the fatigue cycle, can be approximated by the damage...

... behavior tensile properties elevated temperature strain rate sensitivity References Ayres , D. J. and Cullen , T. M. , Nuclear Technology   0029-5450 , Vol. 16 , No. 1 , 1972 , pp. 287 - 296 . Garafalo , F. , Fundamentals of Creep and Rupturs in Metals , Macmilla...