...Haslinda Nahazanan; Ili Syazwani Rosley; Zainuddin Md. Yusoff This article discussed the shear behavior of crushed mudstone and claystone in Malaysia when subjected to short- and long-term immersion while staged compression-immersion-direct shear tests were performed. The crushed mudrocks were...

...Koosha Khorramian; Pedram Sadeghian This article presents a new test method for determining the mechanical properties of glass fiber–reinforced polymer (GFRP) composite bars in compression, namely the compressive strength, compressive modulus of elasticity, ultimate crushing strain, and compressive...

... (GFRP). A GFRP cylinder as a template acts in its place. In addition, it can provide a passive confinement for the composite column. Therefore, three columns have been tested in the experimental program under monotonic axial compressive loading. Furthermore, they have been numerically analyzed by means...

... 2019 medical Internet of things secure sensor data compression reliability pseudo magic squares References van der Meulen , R. , “ Gartner Says 8.4 Billion Connected Things Will Be in Use in 2017, Up 31 Percent from 2016 ,” Gartner, 2017 , http://web.archive.org/web...

...Yassin Shaher Sallam; Shamsad Ahmad This paper presents results of an experimental study on the effect of concrete strength class on performance of carbon-fiber-reinforced-polymer (CFRP)-strengthened concrete subjected to compression. Test results indicated that the strength of CFRP-confined...

... and evaluates a method for determining the effective in situ properties of the plies in filament wound tubes so that classical lamination theory (CLT) can be used to calculate effective ply-level stresses and to predict the overall modulus and strength of tubes loaded in axial compression. An experimental...

..., impact damage has been extensively studied and residual strength has been evaluated post impact damage. Few studies have been conducted to determine the effects of pre-stressing a composite during impact. In the case of in-plane compression during impact, it has been found that there is a synergistic...

... of 17 months. These values were fairly comparable to the values predicted from wood shrinkage alone for this building. 21 09 2012 04 02 2013 24 05 2013 platform wood frame construction vertical movement wood shrinkage moisture content building settlement compression creep...

... in this paper. The polymer PBXN-110 is used as the matrix for the particle-reinforced polymer composite (PBXW-128); the latter is the mock or inert equivalent of actual explosive material. Stress-strain response of both polymeric materials under uniaxial compression is found to be dependent on the strain rate...

... predictions and the experimental data. 14 01 1998 08 06 1999 stress-dilatancy rutting cracking asphalt concrete compression References Ramsamooj , D. V. , Ramadan , J. , and Lin , G. S. , “ Model Prediction of Rutting in Asphalt Concrete ,” ASCE Journal...

...G Mussot-Hoinard; G Ferron A bending-compression device has been designed with the help of the ABAQUS/Standard finite element code for studying the mechanical behavior of structural elements under complex loading. A description of the device and its principle are presented. Samples are instrumented...

...EM Odom; DF Adams One of the recommended compression specimen geometries for plastics in ASTM D 695, Test Method for Compressive Properties of Rigid Plastics, is a straight-sided cylinder or prism. This end-loaded specimen tends to barrel at high strains. Additionally, if modulus is desired...

... based on the moisture response rate of corrugated containers. An interlaboratory study was conducted to determine the effect of reconditioning time on edgewise compressive strength of waxed specimen prepared by standard test methods. Results showed that reconditioning time can be reduced from 24 h to 2...

...DW Green; JW Evans A study was conducted to compare compression strength values obtained using short segments cut from full-length lumber and tested in accordance with ASTM D 4761-87 with those values obtained using full-leagth specimens and tested in accordance with ASTM D 198-84. Tests were...

...MT Yu; TH Topper; DL DuQuesnay; MA Pompetzki The effects of stress ratio, compressive peak stress, and cold rolling on the threshold stress intensity and crack closure level of a mild steel (SAE 1010) were investigated. As the stress ratio and the magnitude of the compressive peak stress were...

...SG Paolinelis; SA Paipetis; PS Theocaris An analytical investigation of three-point bending at large deflections was carried out with materials exhibiting different moduli of elasticity in tension and in compression. It was found that the solutions developed by the authors elsewhere for equal...

... and Technology   0015-0568 , Vol. 3 , No. 1 , 1970 , pp. 10 - 31 . fractures (materials) composite materials shear strength unidirectional pultrusion process resin matrix shear modulus tensile strength neat resin torsion in-plane shear compression interface interfacial bond voids...

...JH Lamb; JA Anderson Specimens of sedimented kaolinite were subjected to consolidated-undrained triaxial compression by means of a new electropneumatic control system that will apply any desired loading path in the axisymmetric stress space or any desired deformation path. Specimens were tested...