Skip Nav Destination
Issues
May 1984
ISSN 0090-3973
EISSN 1945-7553
In this Issue
Research Papers
An Evaluation Method for Comparing Domestic and Foreign Materials Specifications
J. Test. Eval.. May 1984, 12(3): 125–132.
doi: https://doi.org/10.1520/JTE11062J
Techniques for Determination of the Crystallographic Characteristics of Environmentally Induced Brittle Fractures
J. Test. Eval.. May 1984, 12(3): 142–148.
doi: https://doi.org/10.1520/JTE11064J
A Twelve-Year Macroinvertebrate Study in the Vicinity of Two Thermal Discharges to the Susquehanna River Near York Haven, PA
J. Test. Eval.. May 1984, 12(3): 157–162.
doi: https://doi.org/10.1520/JTE11068J
The Quality of Runoff from Model Coal Piles
J. Test. Eval.. May 1984, 12(3): 163–170.
doi: https://doi.org/10.1520/JTE11069J
Precision of Low-Level Soluble Copper Measurements in Natural Freshwater Systems
J. Test. Eval.. May 1984, 12(3): 171–176.
doi: https://doi.org/10.1520/JTE11070J
A Rapid Method for Determining Triuranium Octoxide (U3O8) by Fluorometry
J. Test. Eval.. May 1984, 12(3): 177–181.
doi: https://doi.org/10.1520/JTE11071J
A Standard-Reference Water-Suspended Sediment Sample for Total Recoverable Metals
J. Test. Eval.. May 1984, 12(3): 182–186.
doi: https://doi.org/10.1520/JTE11072J
Technical Notes
The Sandwich Method—A Proposed Approach to the Measurement of Oxygen Transmission Rate Through Moisture-Sensitive Barrier Films
J. Test. Eval.. May 1984, 12(3): 149–151.
doi: https://doi.org/10.1520/JTE11065J
Quantitative Determination of Metals in Oils by Atomic Absorption Spectrophotometry: Inorganic Standards in Acidified Emulsions
J. Test. Eval.. May 1984, 12(3): 152–154.
doi: https://doi.org/10.1520/JTE11066J
Email alerts
RSS Feeds
Mechanical Evaluation of Asphalt Mixtures Containing Recycled Bituminous Membranes (RBMs)
J. Test. Eval. (November 2025)
Microcrack Propagation of Basalt Fiber Reinforced Pavement Concrete under Wheel Load and Freeze-Thaw Cycles Coupling
J. Test. Eval. (November 2025)
Materials, Performance Studies, and Application Progress of Fiber-Reinforced 3D-Printed Concrete
J. Test. Eval. (July 2025)
