Skip Nav Destination
Issues
November 1973
ISSN 0090-3973
EISSN 1945-7553
In this Issue
Research Papers
Comparison of Bending and Tension Tests in Creep of Sheet Metal
J. Test. Eval.. November 1973, 1(6): 451–456.
doi: https://doi.org/10.1520/JTE10049J
Probabilistic Updating of Flaw Information
J. Test. Eval.. November 1973, 1(6): 459–467.
doi: https://doi.org/10.1520/JTE10051J
Thermomechanical Testing of Plastics for Environmental Resistance
J. Test. Eval.. November 1973, 1(6): 468–471.
doi: https://doi.org/10.1520/JTE10052J
A Test Procedure for Determining the Resilient Properties of Granular Materials
J. Test. Eval.. November 1973, 1(6): 472–479.
doi: https://doi.org/10.1520/JTE10053J
A Laboratory Method of Preparing Isotropic Samples of Clay
J. Test. Eval.. November 1973, 1(6): 480–483.
doi: https://doi.org/10.1520/JTE10054J
A Study of Currently Used Methods for Determining the Permeability of Bituminous Mixtures
J. Test. Eval.. November 1973, 1(6): 484–493.
doi: https://doi.org/10.1520/JTE10055J
Metallographic Photomicrographs from 1973 Photographic Exhibit
J. Test. Eval.. November 1973, 1(6): 494–499.
doi: https://doi.org/10.1520/JTE10056J
Standard Reference Materials Available from Private Sources
J. Test. Eval.. November 1973, 1(6): 500–502.
doi: https://doi.org/10.1520/JTE10057J
One-Dimensional Consolidation of Retarded Plastic Concrete
J. Test. Eval.. November 1973, 1(6): 503–509.
doi: https://doi.org/10.1520/JTE10058J
Development of Cold Weather Paving Specifications
J. Test. Eval.. November 1973, 1(6): 510–513.
doi: https://doi.org/10.1520/JTE10059J
Comparison of the Heat Treatment Responses of Three Commercial Titanium Alloys
J. Test. Eval.. November 1973, 1(6): 514–519.
doi: https://doi.org/10.1520/JTE10060J
A Mathematical Description of the Elevated Temperature Flow Behavior of Type 304 Stainless Steel at High Strain Rates
J. Test. Eval.. November 1973, 1(6): 520–523.
doi: https://doi.org/10.1520/JTE10061J
The Influence of Loading Variables on Environment-Enhanced Fatigue Crack Growth in High Strength Steels
J. Test. Eval.. November 1973, 1(6): 524–531.
doi: https://doi.org/10.1520/JTE10062J
Specimen Geometry Effects on the Strength of Unidirectional Resin-Matrix Composites
J. Test. Eval.. November 1973, 1(6): 532–537.
doi: https://doi.org/10.1520/JTE11541J
Email alerts
RSS Feeds
Mechanical Evaluation of Asphalt Mixtures Containing Recycled Bituminous Membranes (RBMs)
J. Test. Eval. (September 2025)
Evaluation of Damage and Nonlinearity of Cold Recycled Materials Mixtures Using a New Strain Sweep Testing Procedure
J. Test. Eval. (September 2025)
Study of Asymmetric Failure Patterns for Curved Tunnels Using Visualized Transparent Soil Tests
J. Test. Eval. (July 2025)
Study on Low-Temperature Performance of Steel Slag Crumb Rubber Modified Asphalt Mixture
J. Test. Eval. (July 2025)
Fault Diagnosis in Gearbox System with MODWT and MODWPT Using SVM and RF Algorithms
J. Test. Eval. (July 2025)
