Abstract

The current evaluation of Superpave design aggregate structure is deterministic. The design involves evaluation of selected trial blends based on volumetric, compaction, and dust proportion requirements. This article incorporates the uncertainties of all 17 variables involved in the process, measured by the coefficient of variation (CV), and develops a revised procedure for comparing mixture properties with the performance-based criteria. The uncertainties of eight measured properties are propagated through the calculation and make the uncertainty of some variables very large. Issues related to the reliability of some variables (CV > 25 %) are discussed and criteria to resolve them are established. The developed mathematical formulas of uncertainty were verified using Monte Carlo simulation. The results show that the potentially unreliable variables are as follows: volume of absorbed asphalt, percentage of absorbed asphalt, and percent voids in total mix at the design compaction level. A tool is provided to help the designer trace the uncertainty of the unreliable variables back to the measured properties so that their precisions may be revised. The current National Cooperative Highway Research Program–recommended precisions for specific gravities were found to be generally satisfactory. However, further research should continue to improve the precision of specific gravity measurements as some intermediate variables may still become unreliable.

References

1.
McGennis
,
R. B.
,
Anderson
,
R. M.
,
Kennedy
,
T. W.
, and
Solaimanian
,
M.
,
Background of Superpave Asphalt Mixture Design and Analysis, FHWA-SA-95-003
,
Federal Highway Administration
,
Washington, DC,
1995
, 160p.
2.
Anderson
,
R. M.
and
McGennis
,
R. B.
,
Superpave Asphalt Mixture Design Illustrated: Level 1 Lab Methods and Analysis, FHWA-SA-95-004
,
Federal Highway Administration
,
Washington, DC
,
1995
, 80p.
3.
Asphalt Institute “
Superpave Level 1 Mix Design
,”
Report No. SP-2
,
Asphalt Institute
,
Lexington, KY
,
1995
, 129p.
4.
Kennedy
,
T. W.
,
Huber
,
G. A.
,
Harrigan
,
E. T.
,
Cominsky
,
R. J.
,
Hughes
,
C. S.
,
Von Quintus
,
H.
, and
Moulthrop
,
J. S.
,
Superior Performing Asphalt Pavements (Superpave): The Product of the SHRP Asphalt Research Program, SHRP-A-410
,
Strategic Highway Research Program
,
Washington, DC
,
1994
, 156p.
5.
Brown
,
E. R.
and
Buchanan
,
M. S.
, “
Consolidation of the N Sub Design Compaction Matrix and Evaluation of Gyratory Compaction Requirements
,”
J. Assoc. Asphalt Paving Technol.
, Vol. 
68
,
1999
, pp. 
153
191
.
6.
Huber
,
G. A.
and
Anderson
,
R. M.
, “
Superpave Design Compaction Effort: Validity of Using Density at the End of Service Life as Parameter to Define N-Design
,”
J. Assoc. Asphalt Paving Technol.
, Vol. 
73
,
2004
, pp. 
807
835
.
7.
Musselman
,
J.
,
Choubane
,
B.
,
Page
,
G.
, and
Upshaw
,
P.
, “
Superpave Field Implementation: Florida’s Early Experience
,”
Transp. Res. Rec. J. Transp. Res. Board
, Vol. 
1609
,
1998
, pp. 
51
60
, https://doi.org/10.3141/1609-07
8.
Cooley
,
L. A.
, Jr.
,
Prowell
,
B. D.
, and
Brown
,
E. R.
, “
Issues Pertaining to the Permeability Characteristics of Coarse-Graded Superpave Mixes
,”
J. Assoc. Asphalt Paving Technol.
, Vol. 
71
,
2002
, pp. 
1
29
.
9.
Kandhal
,
P. S.
and
Cooley
,
L. A.
, Jr.
, “
The Restricted Zone in the Superpave Aggregate Gradation Specification
,”
NCHRP Report 464
, Transportation Research Board, Washington, DC,
2001
, 37p.
10.
Christensen
,
D. W.
, Jr.
and
Bonaquist
,
R.F.
, “
Volumetric Requirements for Superpave Mix Design
,”
NCHRP Report 567
, Transportation Research Board, Washington, DC,
2006
, 46p.
11.
Prowell
,
B. D.
and
Brown
,
E. R.
, “
Superpave Mix Design: Verifying Gyration Levels in the Ndesign Table
,”
NCHRP Report 573
, Transportation Research Board, Washington, DC,
2007
, 62p.
12.
Transportation Research Board “
Superpave: Performance by Design
,”
Final Report of the TRB Superpave Committee
, Transportation Research Board, Washington, DC,
2005
, 56p.
13.
WesTrack Forensic Team “
Superpave Mixture Design Guide
,” Federal Highway Administration, Washington, DC,
2001
, 23p.
14.
Brown
,
E. R.
,
Kandhal
,
P. S.
,
Roberts
,
F. L.
,
Kim
,
Y. R.
,
Lee
,
D-Y.
, and
Kennedy
,
T. W.
,
Hot Mix Asphalt Materials, Mixture Design and Construction
,
NAPA Research and Education Foundation
,
Lanham, MD
,
2009
, 720p.
15.
Federal Highway Administration
Superpave Fundamentals: Reference Manual, NHI Course #131053
, Federal Highway Administration, Washington, DC,
2000
, 163p.
16.
Advanced Asphalt Technologies “
A Manual for Design of Hot-Mix Asphalt with Commentary
,”
NCHRP Report 673
,
Transportation Research Board
,
Washington, DC
,
2011
, 273p.
17.
Federal Highway Administration “
Long-Term Pavement Performance Bind Online
,”
FHWA-HRT-17-009
,
Federal Highway Administration
,
Washington, DC
,
2017
, pp. 
1
4
.
18.
Federal Highway Administration “
A Review of Aggregate and Asphalt Mixture Specific Gravity Measurements and Their Impacts on Asphalt Mix Design Properties and Mix Acceptance
,”
FHWA-HIF-11-033
,
Federal Highway Administration
,
Washington, DC
,
2010
, 39p.
19.
Easa
,
S. M.
New Design Method of Asphalt Mixtures Considering Uncertainty
,”
J. Test. Eval.
, Vol. 
47
, No. 
1
,
2019
, https://doi.org/10.1520/JTE20170353
20.
Easa
,
S. M.
Superpave Design Aggregate Structure Considering Uncertainty: I. Selection of Trial Blends
,”
J. Test. Eval.
, Vol. 
48
, No. 
2
,
2020
, pp. 
1634
1659
, https://doi.org/10.1520/JTE20170682
21.
Benjamin
,
J. R.
and
Cornell
,
C. A.
,
Probability, Statistics, and Decision for Civil Engineers
,
Dover Publications
,
Mineola, NY
,
2014
, 684p.
22.
Singh
,
V. P.
,
Jain
,
S. K.
, and
Tyagi
,
A.
,
Risk and Reliability Analysis: A Handbook for Civil and Environmental Engineers
,
American Society of Civil Engineers Press
,
Reston, VA
,
2007
, 785p.
23.
Hossain
,
M.
,
Fager
,
G.
, and
Maag
,
R. G.
,
Superpave Volumetric Mixture Design and Analysis Handbook, Volume 1: Mixture Design and Analysis
,
Kansas Department of Transportation
,
Topeka, KS
,
2016
, 376p.
24.
Azari
,
H.
,
Lutz
,
B.
, and
Spellerberg
,
P.
, “
Precision Estimates of Selected Volumetric Properties of HMA Using Absorptive Aggregate
,”
Transportation Research Board
,
Washington, DC
,
2006
, 65p.
25.
Cooley
,
L. A.
, Jr.
and
Williams
,
K.
, “
Aggregate Absorption in HMA Mixtures
,”
FHWA/MS-DOT-RD-13-245
,
Mississippi Department of Transportation
,
Jackson, MS
,
2013
, 59p.
26.
Easa
,
S. M.
Evaluation of Superpave Moisture Susceptibility Considering Uncertainty
,”
J. Test. Eval.
,
2018
(in press).
This content is only available via PDF.
You do not currently have access to this content.