Abstract

The most important properties usually measured for refractories are working temperature and thermal stability. Thermal stability of the alumina based samples was measured using standard laboratory procedure, water quench test (JUS.B.D.8.319). The ImagePro Plus program was used for image analysis of deterioration monitoring of the samples before, during, and after water quench test. Mechanical characteristics were considered such as strength, dynamic modulus of elasticity resulting from resonance frequency measurements, as well as ultrasonic velocity. In this work correlation between deterioration, ultrasonic vtelosity, and strength on thermal stability of the samples were investigated. The results were used for validation of the model for the thermal stability behavior prediction of the refractory.

References

1.
Hasselman
D. P. H.
, “
Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics
,”
J. Am. Ceram. Soc.
 0002-7820, Vol.
52
, No.
1
, (
1969
)
600
-
604
.
2.
Hasselman
D. P. H.
, “
Elastic Energy at Fracture and Surface Energy as Design Criteria for Thermal Shock
,”
J. Am. Ceram. Soc.
 0002-7820 https://doi.org/10.1111/j.1151-2916.1963.tb14605.x, Vol.
46
, No.
11
, (
1963
)
535
-
540
.
3.
Nakayama
J.
, “
Direct Measurements of Fracture Energies of Brittle Heterogenius Materials
,”
J. Am. Ceram. Soc.
 0002-7820 https://doi.org/10.1111/j.1151-2916.1965.tb14677.x, Vol.
48
, No.
11
, (
1965
)
583
-
587
.
4.
Nakayama
J.
and
Ishizuka
M.
, “
Experimental Evidence for Thermal Shock Damage Resistance
,”
Am. Ceram. Soc. Bull.
 0002-7812, Vol.
45
, No.
7
, (
1965
)
666
-
669
.
5.
Kingery
W. D.
, “
Factors Affecting Thermal Stress Resistance of Ceramic Materials
,”
J. Am. Ceram. Soc.
 0002-7820 https://doi.org/10.1111/j.1151-2916.1955.tb14545.x, Vol.
38
, No.
1
, (
1955
)
3
-
15
.
6.
Manson
S. S.
,
Smith
R. W.
, “
Theory of Thermal Shock Resistance of Brittle Materials Based on Weibull's Statistical Theory of Strength
,”
J. Am. Ceram. Soc.
 0002-7820, Vol.
38
, No.
1
, (
1955
)
18
-
27
.
7.
Hencke
H.
,
Thomas
,
J. R.
 Jr.
, and
Hasselman
D. P. H.
, “
Role of the Material Properties in the Thermal-Stress Fracture of Brittle Ceramics Subjected to the Conductive Heat Transfer
,”
J. Am. Ceram. Soc.
 0002-7820, Vol.
67
, No.
6
, (
1984
)
393
-
398
.
8.
Volkov-Husovic
T.
, Ph.D. thesis, Belgrade,
1999
.
9.
Volkov-Husovic
T.
,
Jancic
R.
,
Cvetkovic
M.
,
Mitrakovic
D.
, and
Popovic
Z.
, “
Thermal Shock Behavior of Alumina Based Refractories: Fracture Resistance Parameters and Water Quench Test
,”
Mater. Lett.
 0167-577X, Vol.
38
(
1999
)
372
-
378
.
10.
Volkov-Husovic
T. D.
and
Popovic
Z. V.
, “
Resistance Parameters and Water Quench Test as Criteria of Thermal Shock Behaviour of Alumina Reafractories
,”
Mater. Sci. Technol.
 0267-0836, Vol.
15
, No.
10
(
1999
)
1216
-
1219
.
11.
Volkov-Husović
T. D.
,
Jančić
R. M.
, and
Mitraković
D.
, “
Image Analysis Used to Predict Thermal stability of Refractories
,”
Am. Ceram. Soc. Bull.
 0002-7812, Vol.
84
, No.
10
(
2005
) pp
1
-
5
.
12.
Volkov-Husović
T. D.
,
Jančić
R. M.
,
Mitraković
D.
, “
Using the Image Analysis program for Prediction of Thermal Stability Behavior of Refractory Specimen
,”
Mater. Sci. Forum
 0255-5476 (
2005
).
13.
Volkov-Husovic
T. D.
and
Jancic
R. M.
, “
Thermal Shock Behavior of Alumina Based Refractories
,”
Ind. Ceram.
 1121-7588, Vol.
21
, No.
1
(
2002
)
159
-
164
.
14.
Volkov-Husovic
T.
, “
Monitoring the Damage Level during Thermal Stability Testing of Refractory Sample using Sonic Measurement
,”
J. Met.
 0148-6608, Vol.
8
, No.
3
(
2002
)
207
-
215
.
15.
Nyiogi
S. K.
and
Das
A. C.
, “
Prediction of the Thermal Shock Behaviour of Castable Refractories by Sonic Measurements
,”
Interceram
 0020-5214, Vol.
43
, No.
6
(
1994
),
453
-
457
.
16.
Volkov-Husovic
T.
, “
Monitoring the Damage Level during Thermal Stability Testing of Refractory Sample using Sonic Measurement
,”
J. Met.
 0148-6608, Vol.
8
, No.
3
(
2002
)
207
-
215
.
This content is only available via PDF.
You do not currently have access to this content.