Volumes | Aerospace Structures, Structural Dynamics, and Materials Conference | American Society of Mechanical Engineers Digital Collection

Topics: Damage , Extended irreversible thermodynamics , Impedance (Electricity) , Inverse problems , Nondestructive evaluation , Trusses (Building) , Errors , Carbon fibers , Shapes , Composite materials

Development of Light Weight, Low Cost Pleated Soft Actuators

Matthew Thonsgaard, Larry D. Peel

SSDM 2025; V001T01A005https://doi.org/10.1115/SSDM2025-151643

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Actuators , Muscle , Pneumatic actuators , Rubber , Weight (Mass)

Amorphous Bonding for In-Space Welding of Thermoplastic Composite Deployable Structures

Cesar Moriel, Joseph G. Kirchhoff, Miguel Mireles, Tyler B. Hudson, Mehran Tehrani, Armanj D. Hasanyan

SSDM 2025; V001T01A006https://doi.org/10.1115/SSDM2025-151798

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Bonding , Thermoplastic composites , Welding

Design Optimization of an Aircraft Composite Panel Against Bird Strike

Erdem Acar, Muhammed Cihan Tezel

SSDM 2025; V001T01A007https://doi.org/10.1115/SSDM2025-151852

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aircraft , Composite materials , Design , Finite element model , Gelatin , Optimization

Enhanced Mechanical Performance of 3D Printed Thermoset Composites With Bi-Modal Fiber Alignment

Kaan Nuhoglu, Adam Hussain, Emrah Celik

SSDM 2025; V001T01A008https://doi.org/10.1115/SSDM2025-151976

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Composite materials , Equipment performance , Fibers , Thermosetting composites

A Comprehensive Numerical Modelling of a Benchmark Wind Turbine Blade

Francisco Vieira, Mertol Tüfekci, Sam Patel, Soraia Pimenta

SSDM 2025; V001T01A009https://doi.org/10.1115/SSDM2025-152052

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Blades , Failure analysis , Modeling , Wind turbines

Machine Learning Modeling to Predict Mechanical Properties of Nylon Parts Fabricated via 3D Printing

Bouchaib Zazoum, Mahbub Ahmed

SSDM 2025; V001T01A010https://doi.org/10.1115/SSDM2025-152228

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Machine learning , Mechanical properties , Modeling , Nylon fabrics , Aerospace industry , Support vector machines , Tensile strength , Algorithms , Design

Wireless Wearable Multifunctional Adaptive Control System for Aerospace and Industrial Applications

Ruaa Al Mezrakchi, Frank Blanchard

SSDM 2025; V001T01A011https://doi.org/10.1115/SSDM2025-152270

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Adaptive control , Aerospace industry , Control systems , Robots

Eliminating Shear in Flattenable and Rollable Booms

Thomas Murphey, Daniel Hunt, Michael Folkers, Aaron Frary

SSDM 2025; V001T01A012https://doi.org/10.1115/SSDM2025-152297

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aerospace industry , Compacting , Composite materials , Design , Finite element methods , Hinges , Manufacturing , Pressure , Shear (Mechanics) , Shear stress

Structural and Dynamic Analysis of Wind Turbine Towers: A Simplified 1D Modeling Approach

Berkalp Avcı, Emrullah Bilgin, Ekrem Tüfekci

SSDM 2025; V001T01A013https://doi.org/10.1115/SSDM2025-152302

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Design , Dynamic analysis , Euler-Bernoulli beam theory , Modeling , Renewable energy , Wind turbines

Multi-Fidelity Models for Failure Onset Analysis of Composites Under Uncertainties

Dario Zamani, Alfonso Pagani, Marco Petrolo, Erasmo Carrera

SSDM 2025; V001T01A014https://doi.org/10.1115/SSDM2025-152303

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Composite materials , Failure , Uncertainty , Manufacturing , Design , Laminates , Accounting , Deflection , Modeling , Reliability

Whose Plane to Take? A Novel Approach to Identify the Optimal Model for Defect Detection in Composite Aerostructure Material

Austin Yunker, Zachary Kral, Rajkumar Kettimuthu

SSDM 2025; V001T01A015https://doi.org/10.1115/SSDM2025-152304

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Composite materials , Flaw detection

Non Linear Thermo-Mechanical Numerical Model for Space Deployable Structures Actuated With Smart Materials

Tommaso Sironi, Piero Chiaia, Maria Cinefra, Antonio Mattia Grande, Alfonso Pagani

SSDM 2025; V001T01A016https://doi.org/10.1115/SSDM2025-152319

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Computer simulation , Smart materials , Thermomechanics , Deformation , Modeling , Actuators , Finite element model , Shapes , Aerospace industry , Flexible structures

Non-Destructive Testing of In-Situ Activated Fiber Reinforced Composites

Adam K. Hussain, John Wertz, Hilmar Koerner, Kaan Nuhoglu, Emrah Celik

SSDM 2025; V001T01A017https://doi.org/10.1115/SSDM2025-152331

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Composite materials , Extended irreversible thermodynamics , Fiber reinforced composites , Nondestructive evaluation , Electrical conductivity , Thermal conductivity , Carbon reinforced plastics , Damage , Fibers

Fabrication and Testing of 3D Printed SMA Wire Embedded Thermoplastic Polyurethane Actuator

Kazi Md Masum Billah, Thanh Pham, Jeffrey Gleasman

SSDM 2025; V001T01A018https://doi.org/10.1115/SSDM2025-152347

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Actuators , Additive manufacturing , Manufacturing , Shape memory alloys , Testing , Urethane elastomers , Wire

Numerical and Experimental Investigation of Static Behaviour of Aluminum Sandwich Plates

Hüseyin Emir Sakin, Ekrem Tüfekci, Cem Genç, Kerem Utku Demir

SSDM 2025; V001T01A019https://doi.org/10.1115/SSDM2025-152379

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aluminum , Deformation , Finite element analysis , Plates (structures)

Fatigue Performance Assessment of Auxetic Lattice Structures

Serhat Arda Şahin, İnci Pir, Mertol Tüfekci, Ekrem Tüfekci

SSDM 2025; V001T01A020https://doi.org/10.1115/SSDM2025-152404

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Fatigue

Evaluation of Temperature-Dependent Mechanical Properties of HNT And Rubber Reinforced Epoxy Composites

İnci Pir, Ekrem Tüfekci

SSDM 2025; V001T01A021https://doi.org/10.1115/SSDM2025-152468

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Composite materials , Epoxy adhesives , Epoxy resins , Mechanical properties , Rubber , Temperature , Polymer composites , Polymers , Mechanical behavior , ASTM International

Evaluating Multi-Fidelity Structural Models for Utility-Scale Wind Turbine Blades

Fang Jiang, Wenbin Yu, Avinash R. Rao

SSDM 2025; V001T01A022https://doi.org/10.1115/SSDM2025-152493

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Blades , Finite element analysis , Shells , Wind turbines

Reversible Actuation of Fiber-Reinforced Composites Through Embedded Shape Memory Alloys

Max Tchen, Peter L. Bishay, Maya Pishvar

SSDM 2025; V001T01A023https://doi.org/10.1115/SSDM2025-152566

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Composite materials , Deflection , Fiber reinforced composites , Shape memory alloys , Wire , Textiles , Glass reinforced plastics , Resins , Aerospace industry , Biomedicine

Fracture Toughness of 3D Printed Metal Wire Composites

Kazi Md Masum Billah, Adam Kennedy, Jeffrey Gleasman, Syed Hasib Akhter Faruqui

SSDM 2025; V001T01A024https://doi.org/10.1115/SSDM2025-152575

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Composite materials , Fracture toughness , Metals , Wire

Additive Manufacturing of a Reverse Engineered and Generatively Designed Legacy Part

Jeffrey David Gleasman, Blake Winford Ballard, Peter Wesley Bowling, Kazi Md Masum Billah

SSDM 2025; V001T01A025https://doi.org/10.1115/SSDM2025-152576

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Aerospace industry , Design , Manufacturing , Optimization , Generative design , Geometry , Simulation , Stress , Testing

Electrical Network Activation in 3D Printed Thermoset Composites via Nozzle Oscillation Infill Pattern

Kaan Nuhoglu, Adam Hussain, Jean Claude Lelievre, Emrah Celik

SSDM 2025; V001T01A026https://doi.org/10.1115/SSDM2025-152737

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Composite materials , Nozzles , Oscillations , Thermosetting composites

Aerodynamic Performance Evaluation of the NACA 65-421 Airfoil Using CFD and the k-ω SST Turbulence Model

Omar Badran, Zeeshan Azad, Muhammad Virk, Ismail Masalha, Ali Alahmar

SSDM 2025; V001T01A027https://doi.org/10.1115/SSDM2025-157721

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Airfoils , Computational fluid dynamics , Drag (Fluid dynamics) , Performance evaluation , Turbulence

Free Vibration Analysis of Variable-Angle Tow Composite Shells With Variable Curvature Using Carrera’s Unified Formulation

Domenico A. Iannotta, Gaetano Giunta, Levent Kirkayak, Marco Montemurro

SSDM 2025; V001T01A028https://doi.org/10.1115/SSDM2025-158760

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Composite materials , Free vibrations , Shells

Structural Dynamics

Development of Finite Element Models With Node-Wise Variations of Structural Theories for Dynamic Analyses

Daniele Scano, Erasmo Carrera, Marco Petrolo

SSDM 2025; V001T02A001https://doi.org/10.1115/SSDM2025-151469

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aerospace industry , Degrees of freedom , Dynamic analysis , Finite element analysis , Finite element methods , Finite element model , Free vibrations , Kinematics , Modeling , Shapes

Modelling of the Hydraulic Cylinder Using Custom MATLAB-Simscape Component

Prathamesh Ganesh Jadhao, Pavan Kumar Kankar, Ankur Miglani

SSDM 2025; V001T02A002https://doi.org/10.1115/SSDM2025-151843

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Dynamic response , Hydraulic cylinders , Matlab , Modeling , Pressure , Stress

Dynamic Stiffness Method for Free Vibration of Beams and Frameworks Using Higher Order Shear Deformation Theory

J. Ranjan Banerjee

SSDM 2025; V001T02A003https://doi.org/10.1115/SSDM2025-152001

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Algorithms , Free vibrations , Shear deformation , Stiffness

CUF-Based High-Fidelity Finite Beam Elements for Dynamic Analyses of Multibody Systems

Rodolfo Azzara, Matteo Filippi, Erasmo Carrera

SSDM 2025; V001T02A004https://doi.org/10.1115/SSDM2025-152177

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Dynamic analysis , Multibody systems , Finite element analysis , Finite element model , Rotation , Blades , Computer simulation , Degrees of freedom , Finite element methods , Flexible structures

Linearized and Nonlinear Analyses of Rotating Structures Through High-Fidelity Beam/Plate/Shell Finite Elements

Matteo Filippi, Rodolfo Azzara, Erasmo Carrera

SSDM 2025; V001T02A005https://doi.org/10.1115/SSDM2025-152179

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Finite element analysis , Finite element methods , Rotors , Shells , Finite element model , Polynomials , Boundary-value problems , Composite materials , Displacement , Dynamic response

A Sensor Placement Approach to Monitor Vibrations Based on Data-Driven Principal Component Analysis Techniques

Shrihari Arunachalam, Maria Chierichetti

SSDM 2025; V001T02A006https://doi.org/10.1115/SSDM2025-152210

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Optimization , Principal component analysis , Sensor placement , Sensors , Structural health monitoring , Testing , Vibration

Investigating the Influence of a Laterally Placed Void on Natural Frequency Shifts Using Timoshenko Beam Theory

Samaher Shaheen, David J. Nguiffo, Elizabeth E. Rodriguez, Forest G. Siewert, Dennis M. O’Connor

SSDM 2025; V001T02A007https://doi.org/10.1115/SSDM2025-152233

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Finite element methods , Metals , Timoshenko beam theory , Shear deformation , Stiffness , Deflection , Dynamic response , Flaw detection , Metalwork

An Optimization of Tesla-Type Valve for Mitigating Backflow in Rotary Denotation Engines

Forest Siewert, Fatehbir Gill, Enrique Borgzinner, Adelina Armijo, Sam Lloyd-Harry, Yang Chao, Dennis M. O’Connor

SSDM 2025; V001T02A008https://doi.org/10.1115/SSDM2025-152234

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Computational fluid dynamics , Engines , Optimization , Pressure , Valves , Waves

Investigation of Energy Exchange Between Coupled Electro-Mechanical Conservative Oscillators

Kairvi Lodhiya, Matthew Galarza, Zahra Sotoudeh, Diana Andra Borca-Tasciuc

SSDM 2025; V001T02A009https://doi.org/10.1115/SSDM2025-152235

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Blocks (Building materials) , Capacitance , Capacitors , Circuits , Electrodes , Energy conversion , Energy harvesting , Energy sustainability , Energy transformation , Internet of things

Damping Performance of Glass Fiber Reinforced Polymers With Embedded Shape Memory Alloy Wires

Aron Padilla, Peter L. Bishay, Maya Pishvar

SSDM 2025; V001T02A010https://doi.org/10.1115/SSDM2025-152237

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Composite materials , Damping , Glass fibers , Polymers , Shape memory alloys , Vibration , Wire

Forced Vibration Analysis of Rotating Blades Subjected to Large Deformations: A Numerical Investigation With VIBRANT

Mertol Tüfekci

SSDM 2025; V001T02A011https://doi.org/10.1115/SSDM2025-152240

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aircraft engines , Blades , Deformation , Rotating blades , Vibration analysis , Wind turbines , Design , Vibration , Alloys , Aluminum

Aeroservoelastic Modeling for Trajectory Optimization of Morphing Aircrafts

Subarna Pudasaini, Parker Smith, Daning Huang

SSDM 2025; V001T02A012https://doi.org/10.1115/SSDM2025-152272

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aircraft , Modeling , Optimization , Trajectories (Physics)

Assessment of Multi-Fidelity Structural Theories for Dynamic Analyses Using Machine Learning

Marco Petrolo, Alfonso Pagani, Giulio Candita, Pierluigi Iannotti, Erasmo Carrera

SSDM 2025; V001T02A013https://doi.org/10.1115/SSDM2025-152306

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Artificial neural networks , Dynamic analysis , Finite element model , Machine learning , Displacement , Boundary-value problems , Degrees of freedom , Finite element analysis , Geometry , Materials properties

Nonlinear Model Predictive Control of Urban Air Mobility Aircraft Subject to Stochastic Gust Excitations

Jessica Nunes, Weihua Su, Tianyi He

SSDM 2025; V001T02A014https://doi.org/10.1115/SSDM2025-152311

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aircraft , Excitation , Predictive control , Urban air mobility

Nonlinear Aeroelastic Response of Strut-Braced High Aspect Ratio Wings

Fahed Mohd, Mohammadreza Amoozgar, Stewart McWilliam

SSDM 2025; V001T02A015https://doi.org/10.1115/SSDM2025-152329

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Flutter (Aerodynamics) , Struts (Engineering) , Wings

Experimental and Numerical Modal Analysis of a Honeycomb Panel for Aircraft Structures Application

Viet-Hung Vu, Liem Huynh, Shubham Chaudhry, Zhaoheng Liu

SSDM 2025; V001T02A016https://doi.org/10.1115/SSDM2025-152336

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aircraft , Honeycomb structures , Modal analysis , Testing

Effect of Nonlinear Energy Sink on Aeroelasticity of High Aspect Ratio Wings

Ira P. Wall, Mohammadreza R. Amoozgar, Atanas A. Popov

SSDM 2025; V001T02A017https://doi.org/10.1115/SSDM2025-152407

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aeroelasticity , Flutter (Aerodynamics) , Wings , Dampers , Flow (Dynamics) , Aircraft , Deflection , Degrees of freedom , Limit cycles , Oscillations

Dynamic Load of Urban Air Mobility Aircraft in Wake Vortex of Large Passenger Aircraft

Tianyi He, Weihua Su, Zhongquan Charlie Zheng

SSDM 2025; V001T02A018https://doi.org/10.1115/SSDM2025-152507

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aircraft , Stress , Urban air mobility , Wake turbulence

LPV System Identification of VTOL Aircraft With Hybrid Configuration

Clayton Spencer, Tianyi He

SSDM 2025; V001T02A019https://doi.org/10.1115/SSDM2025-152508

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: System identification , Urban air mobility , Vertical take-off and landing aircraft , Flight , Design , Modeling , Wings , Aircraft , Dynamic models , Multirotors

Unsupervised Anomalous Sound Detection of Noisy Real-World Production Facility Using Deep Autoencoder and Spectrogram

Fei Song, Juan Alvarez, Mohammad Manzur Murshid, Ajit Mutalik, Eddie Gutierrez, Christopher Jinks, Judy Dong

SSDM 2025; V001T02A020https://doi.org/10.1115/SSDM2025-152541

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Deep learning , Inspection , Production facilities , Oil pumps , Engines , Signals , Time series , Acoustics , Bearings , Compressors

Langasite Cryogenic Pressure Sensor for Space Shuttle Fuel Tank Monitoring

Shuai Ju, Haifeng Zhang

SSDM 2025; V001T02A021https://doi.org/10.1115/SSDM2025-152552

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Fuel storage , Pressure , Pressure sensors , Space vehicles

Load Spectrum Determination for Early-Stage Aircraft Design

Sander van den Broek, Ali Emre Yilmaz, Tom Hunns, Edwin Simpson, Simon Coggon, Jonathan Cooper

SSDM 2025; V001T02A022https://doi.org/10.1115/SSDM2025-152193

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aircraft , Design , Gears , Metamodeling , Optimization , Stress

Materials

A Direct Solution to the Self-Sensing Inverse Problem Via the Primal-Dual Interior Point Method

Tyler N. Tallman

SSDM 2025; V001T03A001https://doi.org/10.1115/SSDM2025-151276

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Inverse problems

Sustainable Aerospace Composites: Enhancing Mechanical Performance of FFF-Printed Onyx Through Fibre Optimization

Karthikeyan Ramachandran, Constance L. Gnanasagaran, Meysam Nasr Azadani, Jayesh S. Bhavan, Vishaal Harikrishna Kumar

SSDM 2025; V001T03A002https://doi.org/10.1115/SSDM2025-151334

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aerospace composites , Aerospace industry , Composite materials , Equipment performance , Fibers , Fused deposition modeling , Manufacturing , Optimization , Sustainability

Simulating Elastic Wave Propagation in RR1000 Alloy: Impact of Grain Size and Texture

Himanshu Gupta, Anay Mohan Shembekar, S. Gopalakrishnan, Satyam Suwas

SSDM 2025; V001T03A003https://doi.org/10.1115/SSDM2025-151658

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Alloys , Elastic waves , Grain size , Texture (Materials)

Concurrent Multiscale Framework for Wave Propagation in Crystalline Material Nanostructures

Anay Mohan Shembekar, S. Gopalakrishnan

SSDM 2025; V001T03A004https://doi.org/10.1115/SSDM2025-151720

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Finite element methods , Nanostructures , Wave propagation

Utilizing Lunar Regolith As a Reinforcement Material for Fiber-Reinforced Polymer Matrix Composite

Denizhan Yavas, Ashraf F. Bastawros

SSDM 2025; V001T03A005https://doi.org/10.1115/SSDM2025-151811

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Fiber reinforced composites , Fibers , Lunar soil , Polymer composites , Shear strength

Quantification of Cohesive Properties in Bioinspired Interfaces of 3D-Printed Heterogeneous Materials

Umut Altuntas, Demirkan Coker, Denizhan Yavas

SSDM 2025; V001T03A006https://doi.org/10.1115/SSDM2025-151969

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Biomimetics , Fracture (Materials) , Fracture toughness

Enhanced Temperature Prediction in Wire Arc-Directed Energy Deposition Using Physics-Informed Neural Networks

Haiye (Justin) Xie, Joshua Bassett, Sara Adibi, Doyl Dickel, Gehendra Sharma, Jonathan Storey, Haley Dozier, Sungkwang Mun

SSDM 2025; V001T03A007https://doi.org/10.1115/SSDM2025-151985

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Artificial neural networks , Heat transfer , Machine learning , Physics , Temperature , Wire , Metals , Printing , Architecture

Complex Actuation Response of Functionally Graded High Temperature Shape Memory Alloys

Haoyi Tian, Abdelrahman Elsayed, Ibrahim Karaman, Dimitris Lagoudas

SSDM 2025; V001T03A008https://doi.org/10.1115/SSDM2025-151987

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , High temperature , Modeling , Shape memory alloys

Influence of Ti₃SiC₂ Max Phase Addition on the Tribological Performance of Ni-Cr Coatings

Mohammad Ashikul Alam, Nihal Ahmed, Bo Shen, Sujan Ghosh, Wan Shou

SSDM 2025; V001T03A009https://doi.org/10.1115/SSDM2025-152031

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Coatings , Silicon carbide , Tribology

Thermal Calibration of Finite Element Models in Wire Arc Directed Energy Deposition of ER-120S-G Using Thermocouples and Infrared Cameras

Joshua Bassett, Gehendra Sharma, Justin Xie, Jonathan Storey, Han-Gyu Kim, Tonya Stone, Haley Dozier, Sungkwang Mun

SSDM 2025; V001T03A010https://doi.org/10.1115/SSDM2025-152032

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Calibration , Energy efficiency , Finite element model , Heat transfer coefficients , Thermocouples , Wire

Advanced Materials Creation From Local Resources in Extreme Environments

Jessica Vold, Christopher Matetich, Abigail Olson

SSDM 2025; V001T03A011https://doi.org/10.1115/SSDM2025-152048

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Advanced materials , Building materials , Composite materials , Extruding , Finishes , Injection molding , Lunar soil , Mechanical properties , Polymer composites

Strengthening Architected Instability-Based Metamaterials (AIMs)

Li Wan, Devin Young, Yunlan Zhang

SSDM 2025; V001T03A012https://doi.org/10.1115/SSDM2025-152066

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Energy dissipation , Metamaterials , Phase transitions , Deformation , Mechanical properties , Absorption , Aerospace engineering , Aerospace industry , Buckling , Compression

Deep-Learning-Based Ultrasound Computed Tomography for Material Characterization

Shoaib Anwar, Austin Yunker, Md. Aktharuzzaman, Rajkumar Kettimuthu, Weihua Su

SSDM 2025; V001T03A013https://doi.org/10.1115/SSDM2025-152112

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Artificial neural networks , Computerized tomography , Materials properties , Ultrasound , Engineering simulation , Nondestructive evaluation , Simulation , Structural health monitoring , Trains , Artificial intelligence

Modeling and Homogenization of Auxetic Structures Using Higher Order Micropolar Continuum Theory

Mark Smeets, Armanj D. Hasanyan, Paul Davidson

SSDM 2025; V001T03A014https://doi.org/10.1115/SSDM2025-152127

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Modeling , Deformation , Stiffness , Collisions (Physics) , Delays , Design , Elongation , Finite element analysis , Honeycomb structures , Materials properties

Modeling the Influence of Finite Interface Thickness in Staggered Composites Using a Continuum-Cohesive Interface Approach

Manuel J. Carvajal Loaiza, Maria I. Vallejo Ciro, Vanessa Restrepo

SSDM 2025; V001T03A015https://doi.org/10.1115/SSDM2025-152155

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Anisotropy , Bricks , Composite materials , Damage , Deformation , Design , Dimensions , Energy dissipation , Engineering simulation , Engineering systems and industry applications

Constitutive Modelling of Granular Materials Using Cundall-Strack and Hertz-Mindlin Contact Models

Bhatpahri Pramay, S. Gopalakrishnan, Anay Mohan Shembekar

SSDM 2025; V001T03A016https://doi.org/10.1115/SSDM2025-152166

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Discrete element methods , Engineering simulation , Granular materials , Mechanical properties , Modeling , Optimization , Simulation

Characterization and Computational Validation of Multi-Layer Carbon Fiber Based Polymer Matrix Composite Material for Rocket Engine Combustion Chamber Applications

Santiago Gonzalez Buenaventura, Fabio Arturo Rojas Mora, Andres Gonzalez-Mancera

SSDM 2025; V001T03A017https://doi.org/10.1115/SSDM2025-152216

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Carbon fibers , Combustion chambers , Composite materials , Engines , Polymer composites , Rocket engines , Weight (Mass) , Carbon reinforced plastics , Computational fluid dynamics , Design

Effects of Fused Deposition Modeling Process Parameters on Stainless Steel Mechanical Properties

Ruaa Al Mezrakchi, Angel Arrieta Guzman, Viet The Nguyen, Youssef K. Hamidi

SSDM 2025; V001T03A018https://doi.org/10.1115/SSDM2025-152273

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Fused deposition modeling , Mechanical properties , Metals , Stainless steel

Formulation and Properties of Agar-Based Biopolymer Blends for Packaging Applications

Alaa Alnatsheh, Birce Dikici

SSDM 2025; V001T03A019https://doi.org/10.1115/SSDM2025-152308

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Agar , Biopolymers , Packaging

Probabilistic Physics-Guided Machine Learning With Missing Data: Applications in Additive Manufacturing

Jie Chen, Yongming Liu

SSDM 2025; V001T03A020https://doi.org/10.1115/SSDM2025-152313

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Artificial neural networks , Machine learning , Physics

Mesoscale Modeling of Microstructural Effects on Inelastic Behavior of High Entropy Alloys

Thomas Ralph, Manish Vasoya, Vahid Attari, Raymundo Arróyave, Dimitris C. Lagoudas

SSDM 2025; V001T03A021https://doi.org/10.1115/SSDM2025-152327

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Alloys , Entropy , Modeling

Molecular Dynamics Modeling and Characterization of Complex Nano-Structure of PAN-Based Carbon Fibers

Md Fazlay Alam, Armanj D. Hasanyan

SSDM 2025; V001T03A022https://doi.org/10.1115/SSDM2025-152342

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Carbon fibers , Modeling , Molecular dynamics , Nanostructures

Gecko-Inspired Surface Microstructures: Friction Control and Adaptive Design for Space Environments

Shuvodeep De, Shuo Xu, Anahita Emami, Meysam Khaleghian

SSDM 2025; V001T03A023https://doi.org/10.1115/SSDM2025-152355

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Adhesives , Aerospace industry , Biomimetics , Design , Durability , Engineering simulation , Finite element methods , Finite element model , Friction

Coupling of Local and Non-Local Model for Wave Propagation in 1D Higher Order Structure

Ajeet Kumar Yadav, S. Gopalakrishnan

SSDM 2025; V001T03A024https://doi.org/10.1115/SSDM2025-152363

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Reflection , Wave propagation , Constitutive equations , Fracture (Materials) , Carbon nanotubes , Modeling , Physics , Stress , Stress singularity

Image Based Statistical Analysis of Composite Microstructure for RVE Simulations

Michael May, Sebastian Kilchert

SSDM 2025; V001T03A025https://doi.org/10.1115/SSDM2025-152420

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Composite materials , Simulation , Statistical analysis

Analysis of Temperature and Strain Rate-Dependent Mechanical Behavior of Thermoplastics: a Comparative Study of Multilinear Kinematic Hardening and the Three-Network Material Models

Dhruvin Jasoliya, Adarsh Chaurasia, Ali Najafi

SSDM 2025; V001T03A026https://doi.org/10.1115/SSDM2025-152455

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Hardening , Kinematics , Mechanical behavior , Temperature

UV Radiation Effects on the Performance of Aerospace Composites

Kazi Md Masum Billah, Diego Zuniga, Christopher Martinez, Adrian Nolasco, Youssef K. Hamidi

SSDM 2025; V001T03A027https://doi.org/10.1115/SSDM2025-152495

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Aerospace composites , Durability , Ultraviolet radiation

Evidence of Mixed Mode Failure in 2D Woven Composites Under Uniaxial Compression

Wanru Miao, Austin Giordano, Kedar Kirane

SSDM 2025; V001T03A028https://doi.org/10.1115/SSDM2025-152496

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Compression , Failure , Fracture (Materials) , Woven composites , Displacement , Stress , Carbon , Composite materials , Damage , Electromagnetic induction

Fabrication and Flexural Performance Comparison of 3D Printed Lattice Core and Foam Core Sandwich Composites With Glass/Epoxy Face Sheets

Durga Prasad Gorijala, Mahesh Hosur, Deepak Bommarapu, Job Gonzales, Rajashekar Mogiligidda

SSDM 2025; V001T03A029https://doi.org/10.1115/SSDM2025-152550

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Additive manufacturing , Bending (Stress) , Composite materials , Epoxy resins , Glass , Manufacturing

Effects of Chlorine Exposure on the Mechanical Properties of Polymer Composites

Kazi Md Masum Billah, Diego Zuniga, Christopher Martinez, Adrian Nolasco, Youssef K. Hamidi

SSDM 2025; V001T03A030https://doi.org/10.1115/SSDM2025-152571

Abstract

View Articletitled, SCM.SharedControls.Infrastructure.TitleDisplayModel?.Text

PDF

Topics: Mechanical properties , Polymer composites , Absorption , Aerospace industry , Bending strength , Durability , Aerospace engineering , ASTM International , Corrosion , Damage