This paper describes how direct evaporative coolers can be used to improve the energy efficiency of air-cooled chillers in various operating conditions and with different strategies for staging condenser fans. These coolers are installed in front of air-cooled condensers to precool outdoor air before entering the condensers. A simulation analysis on an air-cooled chiller equipped with a direct evaporative cooler showed that when head pressure control is used, the cooler enables the condensing temperature to drop by 2.1–6.2°C, resulting in a 1.4-14.4% decrease in chiller power and a 1.3–4.6% increase in the refrigeration effect. When the chiller with the cooler operates under condensing temperature control, where condenser effectiveness is enhanced by staging all condenser fans, there is a savings in chiller power of 1.3-4.3% in some operating conditions in which the drop in compressor power exceeds the additional condenser fan power due to the pressure drop across the cooler.
Application of Direct Evaporative Coolers for Improving the Energy Efficiency of Air-Cooled Chillers
Contributed by the Solar Energy Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS. Manuscript received by the ASME Solar Energy Division March 24, 2004; final revision July 14, 2004. Associate Editor: V. C. Mei.
- Views Icon Views
- Share Icon Share
- Search Site
Yu , F. W., and Chan , K. T. (July 20, 2005). "Application of Direct Evaporative Coolers for Improving the Energy Efficiency of Air-Cooled Chillers ." ASME. J. Sol. Energy Eng. August 2005; 127(3): 430–433. https://doi.org/10.1115/1.1866144
Download citation file:
- Ris (Zotero)
- Reference Manager