A three-dimensional model and dimensionless scale analysis of the transient fluid dynamics and heat transfer in an inclined adiabatic water-filled enclosure with an immersed cylindrical cold sink is presented. The geometry represents an integral collector storage system with an immersed heat exchanger. The modeled enclosure has an aspect ratio of 6:1 and is inclined at to the horizontal. The heat exchanger is represented by a constant surface temperature horizontal cylinder positioned near the top of the enclosure. A scale analysis of the transient heat transfer process identifies four temporal periods: conduction, quasi-steady, fluctuating, and decay. It also provides general formulations for the transient Nusselt number, and volume-averaged water temperature in the enclosure. Insight to the transient fluid and thermal processes is provided by presentation of instantaneous flow streamlines and isotherm contours during each transient period. The flow field consists of two distinct zones. The zone above the cold sink is nearly stagnant. The larger zone below the sink is one of strong mixing and recirculation initiated by the cold plume formed in the boundary layer of the cylindrical sink. Correlations for the transient Nusselt number and the dimensionless volume-averaged tank temperature predicted from the model compare favorably to prior measured data. Fluid motion in the enclosure enhances heat transfer compared to that of a cylinder in an unbounded fluid.
Skip Nav Destination
e-mail: jhd@me.umn.edu
Article navigation
August 2005
Research Papers
Natural Convective Flow and Heat Transfer in a Collector Storage with an Immersed Heat Exchanger: Numerical Study
Yan Su,
Yan Su
Department of Mechanical Engineering,
University of Minnesota
, 111 Church Street, S.E., Minneapolis, MN 55455
Search for other works by this author on:
Jane H. Davidson
Jane H. Davidson
Fellow ASME
Department of Mechanical Engineering,
e-mail: jhd@me.umn.edu
University of Minnesota
, 111 Church Street, S.E., Minneapolis, MN 55455
Search for other works by this author on:
Yan Su
Department of Mechanical Engineering,
University of Minnesota
, 111 Church Street, S.E., Minneapolis, MN 55455
Jane H. Davidson
Fellow ASME
Department of Mechanical Engineering,
University of Minnesota
, 111 Church Street, S.E., Minneapolis, MN 55455e-mail: jhd@me.umn.edu
J. Sol. Energy Eng. Aug 2005, 127(3): 324-332 (9 pages)
Published Online: March 4, 2005
Article history
Received:
February 18, 2005
Revised:
March 4, 2005
Citation
Su, Y., and Davidson, J. H. (March 4, 2005). "Natural Convective Flow and Heat Transfer in a Collector Storage with an Immersed Heat Exchanger: Numerical Study." ASME. J. Sol. Energy Eng. August 2005; 127(3): 324–332. https://doi.org/10.1115/1.1934735
Download citation file:
Get Email Alerts
Analysis of Erosion of Surfaces in Falling Particle Concentrating Solar Power
J. Sol. Energy Eng (April 2025)
Related Articles
Thermal Characterization of Prototypical Integral Collector Storage Systems With Immersed Heat Exchangers
J. Sol. Energy Eng (February,2005)
Natural Convection from a Horizontal Tube Heat Exchanger Immersed in a Tilted Enclosure
J. Sol. Energy Eng (February,2003)
Transient Natural Convection Heat Transfer Correlations for Tube Bundles Immersed in a Thermal Storage
J. Sol. Energy Eng (May,2007)
Investigation of Shroud Geometry to Passively Improve Heat Transfer in a Solar Thermal Storage Tank
J. Sol. Energy Eng (February,2014)
Related Proceedings Papers
Related Chapters
Numerical Analysis of a Latent Heat Storage Heat Exchanger Considering the Effect of Natural Convection
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
An Analysis of the Feasibility of Photoelectric Technique Applied in Defrost-Control
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Hydrodynamic Mass, Natural Frequencies and Mode Shapes
Flow-Induced Vibration Handbook for Nuclear and Process Equipment