An aluminum roll-bond panel with a photovoltaic module on the surface was developed recently for use as an evaporator of a heat pump for residential hot water supply and room heating [Proceedings of the JSES/JWEA Joint Conference, Okinawa, pp. 305–308 (in Japanese)]. In the present study, the panel was modified to reduce the large pressure loss of the refrigerant flow at the evaporator. Total area of the panels was and the rated capacity of the compressor was 250 W. A collector efficiency factor of 0.9 was obtained for the evaporator. The effect of the location of the feeler bulb on performance of the heat pump was also examined.
Studies of Heat Pumps Using Direct Expansion Type Solar Collectors
Contributed by the Solar Energy Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS. Manuscript received by the ASME Solar Division October 21, 2003; final revision July 30, 2004. Associate Editor: A. Reddy.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Ito , S., Miura , N., and Takano, Y. (February 7, 2005). "Studies of Heat Pumps Using Direct Expansion Type Solar Collectors ." ASME. J. Sol. Energy Eng. February 2005; 127(1): 60–64. https://doi.org/10.1115/1.1824102
Download citation file:
- Ris (Zotero)
- Reference Manager