The lack of predictive performance tools creates a barrier to the widespread use of building integrated photovoltaic panels. The National Institute of Standards and Technology (NIST) has created a building integrated photovoltaic (BIPV) test bed to capture experimental data that can be used to improve and validate previously developed computer simulation tools. Twelve months of performance data have been collected for building integrated photovoltaic panels using four different cell technologies—crystalline, polycrystalline, silicon film, and triple-junction amorphous. Two panels using each cell technology were present, one without any insulation attached to its rear surface and one with insulation having a nominal thermal resistance value of attached to its rear surface. The performance data associated with these eight panels, along with meteorological data, were compared to the predictions of a photovoltaic model developed jointly by Maui Solar Software and Sandia National Laboratories (SNL), which is implemented in their IV Curve Tracer software . The evaluation of the predictive performance tools was done in the interest of refining the tools to provide BIPV system designers with a reliable source for economic evaluation and system sizing.
Measured Versus Predicted Performance of Building Integrated Photovoltaics
Contributed by the Dynamic Systems and Control Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF SOLAR ENERGY ENGINEERING. Manuscript received by the ASME Dynamic Systems and Control Division, May 2002; final revision, Aug. 2002. Associate Editor: A. Reddy.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Davis, M. W., Fanney, A. H., and Dougherty, B. P. (January 27, 2003). "Measured Versus Predicted Performance of Building Integrated Photovoltaics ." ASME. J. Sol. Energy Eng. February 2003; 125(1): 21–27. https://doi.org/10.1115/1.1532006
Download citation file:
- Ris (Zotero)
- Reference Manager