A new hot-salt pump has been developed for molten-salt solar power tower applications that will reduce the capital cost of the plant, eliminate many of the piping, valve and sump problems associated with the handling of molten salt, and improve the reliability of a critical part of the operating system of the plant. Previous systems required that the pumps in these plants be housed in shallow sumps that were gravity fed by the storage tanks. This new pump arrangement will eliminate the sump level-control valves and the potential for overflowing the pump sump vessels. Until now, only cantilever pumps were qualified for hot molten-salt service because no suitable bearing materials had been tested. This paper describes the successful qualification of a long-shafted pump with salt-lubricated bearings tested for over 5000 hours with nitrate salt at 565°C.

Issue Section:
Technical Papers
Keywords:
solar power stations, solar energy concentrators, pumps, lubrication, machine bearings
Topics:
Bearings, Pumps
1.
Pacheco, J. E., and Gilbert, R., 1999, “Overview of the Recent Results of the Solar Two Test and Evaluations Program,” Proce. of ASME Int. Solar Energy Conf. Renewable and Advanced Energy Systems for the 21st Century, Maui, HI.
2.
Smith, D. C., Rush, E. E., Matthews, C. W., Chavez, J. M., and Bator, P. A., 1992, Report on the Test of the Molten-Salt Pump and Valve Loops, Sandia National Laboratories Report, SAND91-1747.
3.
De Laquil III, P., Kelly, B. D., and Lessley, R. L., 1992, Solar Central Receiver Technology Advancement for Electric Utility Applications, Phase IIC Topical Report, Pacific Gas & Electric, Report 007.25-92-2.
4.
Bradshaw, R. W., and Carling, R. W., 1987, A Review of Chemical and Physical Properties of Molten Alkali Nitrate Salts and Their Effect on Materials Used for Solar Central Receivers, Sandia National Laboratories Report, SAND87-8005.
5.
Goods, S. H., Bradshaw, R. W., Prairie, M. R., and Chavez, J. M., 1994, Corrosion of Stainless and Carbon Steels in Molten Mixtures of Industrial Nitrates, Sandia National Laboratories Report, SAND94-8211.
6.
Goods, S. H., Bradshaw, R. W., Clift, M. J., and Boehme, D. R., 1997, The Effects of Silicon on the Corrosion Characteristics of 2 14 Cr-1Mo Steel in Molten Nitrate Salt, Sandia National Laboratories Report, SAND97-8269.
Copyright © 2002
 by ASME
You do not currently have access to this content.