A silica-base monolithic adsorbent was prepared by sol-gel synthesis with a corrugated ceramic fiber sheet as a matrix and assembled in an adsorptive dehumidifier of rotary type, which operates with a thermal regeneration cycle. High efficiency of dehumidification was confirmed at a regeneration temperature as low as 80°C when the rotation speed or cycle time was adjusted to the optimal value. A prototype air conditioning unit equipped with the balanced flow dehumidifier was examined in a direct pass ventilation mode. A satisfactory decrease in enthalpy of product air relative to room air was observed. Changes in the state of air during processing are discussed rather rigorously in terms of a humidity chart.

1.
Banks
P. J.
,
1985
, “
Prediction of Heat and Mass Regenerator Performance Using Nonlinear Analogy Method: Part 1—Basis
,”
ASME Journal of Heat Transfer
, Vol.
107
, pp.
222
229
.
2.
Banks
P. J.
,
1985
, “
Prediction of Heat and Mass Regenerator Performance Using Nonlinear Analogy Method; Part 2—Comparison of Methods
,”
ASME Journal of Heat Transfer
, Vol.
107
, pp.
230
238
.
3.
Collier
R. K.
,
Barlow
R. S.
, and
Arnold
F. H.
,
1982
, “
An Overview of Open-Cycle Desiccant-Cooling Systems and Materials
,”
ASME Journal of Solar Energy Engineering
, Vol.
104
, pp.
28
34
.
4.
Collier
R. K.
, and
Cohen
B. M.
,
1991
, “
An Analytical Examination of Methods for Improving the Performance of Desiccant Cooling Systems
,”
ASME Journal of Solar Energy Engineering
, Vol.
113
, pp.
157
163
.
5.
Farooq
S.
, and
Ruthven
D. M.
,
1991
, “
Numerical Simulation of a Desiccant Bed for Solar Air Conditioning Applications
,”
ASME Journal of Solar Energy Engineering
, Vol.
113
, pp.
80
88
.
6.
Holmberg
R. B.
,
1979
, “
Combined Heat and Mass Transfer in Regenerators with Hygroscopic Materials
,”
ASME Journal of Heat Transfer
, Vol.
101
, pp.
205
210
.
7.
Jurinak
J. J.
, and
Mitshell
J. W.
,
1984
, “
Recirculatio of Purged Flow in an Adiabatic Counterflow Rotary Dehumidifier
,”
ASME Journal of Heat Transfer
, Vol.
106
, pp.
369
375
.
8.
Jurinak
J. J.
,
Mitchell
J. W.
, and
Beckman
W. A.
,
1984
, “
Open-Cycle Desiccant Air Conditioning as an Alternative to Vapor Compression Cooling in Residential Applications
,”
ASME Journal of Solar Energy Engineering
, Vol.
106
, pp.
252
260
.
9.
Kang
T. S.
, and
Maclaine-cross
I. L.
,
1989
, “
High Performance, Solid Desiccant, Open Cooling Cycles
,”
ASME Journal of Solar Energy Engineering
, Vol.
111
, pp.
176
183
.
10.
Kodama
A.
,
Goto
M.
,
Hirose
T.
, and
Kuma
T.
,
1993
, “
Experimental Study of the Optimal Operation for a Honeycomb Adsorber Operated with Thermal Swing
,”
J. Chem. Eng. Japan
, Vol.
26
, pp.
530
535
.
11.
Kodama
A.
,
Goto
M.
,
Hirose
T.
, and
Kuma
T.
,
1994
, “
Temperature Profile and Optimal Rotation Speed of a Honeycomb Rotor Adsorber Operated with Thermal Swing
,”
J. Chem. Eng, Japan
, Vol.
27
, pp.
644
649
.
12.
Kodama
A.
,
Goto
M.
,
Hirose
T.
, and
Kuma
T.
,
1995
, “
Performance Evaluation for a Thermal Swing Honeycomb Rotor Adsorber using a Humidity Chart
,”
J. Chem. Eng. Japan
, Vol.
28
, pp.
19
24
.
13.
Krishna
S. M.
, and
Murthy
S. S.
,
1989
, “
Experiments on a Silica Gel Rotary Dehumidifier
,”
Heat Recovery Systems & CHP
, Vol.
9
, pp.
467
473
.
14.
Kuma, T., and Okano, H., 1989a, U. S. Patent 4,886,769.
15.
Kuma, T., and Okano, H., 1989b, Japan Patent H125614.
16.
Lof
G. O. G.
,
Cler
G.
, and
Brisbane
T.
,
1988
, “
Performance of a Solar Desiccant Cooling System
,–
ASME Journal of Solar Energy Engineering
, Vol.
110
, pp.
165
171
.
17.
Maclaine-cross
I. L.
, and
Banks
P. J.
,
1981
, “
A General Theory of Wet Surface Heat Exchangers and its Application to Regenerative Evaporative Cooling
,”
ASME Journal of Heat Transfer
, Vol.
103
, pp.
579
585
.
18.
Maclaine-cross
I. L.
,
1985
, “
High-Performance Adiabatic Desiccant Open-Cooling Cycles
,”
ASME Journal of Solar Energy Engineering
, Vol.
107
, pp.
102
104
.
19.
Ruthven, D. M., 1984, Principles of Adsorption and Adsorption Processes, John Wiley and Sons, New York, pp. 48–54.
20.
Schultz
K. J.
, and
Mitchell
J. W.
,
1989
, “
Comparison of the DESSIM Model With a Finite Difference Solution for Rotary Desiccant Dehumidifiers
,”
ASME Journal of Solar Energy Engineering
, Vol.
111
, pp.
286
291
.
21.
Van Den Bluck
E.
,
Mitchell
J. W.
, and
Klein
S. A.
,
1985
, “
Design Theory for Rotary Heat and Mass Exchangers—I. Wave Analysis of Rotary Heat and Mass Exchangers with Infinite Transfer Coefficients
,”
Int. J. Heat Mass Transfer
, Vol.
28
, pp.
1575
1586
.
22.
Van Den Bluck
E.
,
Mitchell
J. W.
, and
Klein
S. A.
,
1985
, “
Effectiveness-Number-of-Transfer Units Method for Rotary Heat and Mass Exchangers
,”
Int. J. Heat Mass Transfer
, Vol.
28
, pp.
1587
1595
.
23.
Van Den Bulck
E.
,
Mitchell
J. W.
, and
Klein
S. A.
,
1986
, “
The Use of Dehumidifiers in Desiccant Cooling and Dehumidification Systems
,”
ASME Journal of Heat Transfer
, Vol.
108
, pp.
684
692
.
24.
Van Den Bulck
E.
,
Klein
S. A.
, and
Mitchell
J. W.
,
1988
, “
Second Law Analysis of Solid Desiccant Rotary Dehumidifiers
,”
ASME Journal of Solar Energy Engineering
, Vol.
110
, pp.
2
9
.
25.
Warren
M. L.
, and
Wahling
M.
,
1991
, “
Analysis and Comparison of Active Solar Desiccant and Absorption Cooling Systems: Part I—Model Description
,”
ASME JOURNAL OF SOLAR ENERGY ENGINEERING
, Vol.
113
, pp.
25
35
.
This content is only available via PDF.
You do not currently have access to this content.