https://orcid.org/0000-0002-9100-4001
Abstract
Over the past century, research has focused on continuously improving the performance of manufacturing processes and systems—often measured in terms of cost, quality, productivity, and material and energy efficiency. With the advent of smart manufacturing technologies—better production equipment, sensing technologies, computational methods, and data analytics applied from the process to enterprise levels—the potential for sustainability performance improvement is tremendous. Sustainable manufacturing seeks the best balance of a variety of performance measures to satisfy and optimize the goals of all stakeholders. Accurate measures of performance are the foundation on which sustainability objectives can be pursued. Historically, operational and information technologies have undergone disparate development, with little convergence across the domains. To focus future research efforts in advanced manufacturing, the authors organized a one-day workshop, sponsored by the U.S. National Science Foundation, at the joint manufacturing research conferences of the American Society of Mechanical Engineers and Society of Manufacturing Engineers. Research needs were identified to help harmonize disparate manufacturing metrics, models, and methods from across conventional manufacturing, nanomanufacturing, and additive/hybrid manufacturing processes and systems. Experts from academia and government labs presented invited lightning talks to discuss their perspectives on current advanced manufacturing research challenges. Workshop participants also provided their perspectives in facilitated brainstorming breakouts and a reflection activity. The aim was to define advanced manufacturing research and educational needs for improving manufacturing process performance through improved sustainability metrics, modeling approaches, and decision support methods. In addition to these workshop outcomes, a review of the recent literature is presented, which identifies research opportunities across several advanced manufacturing domains. Recommendations for future research describe the short-, mid-, and long-term needs of the advanced manufacturing community for enabling smart and sustainable manufacturing.
Issue Section:
Review Articles
References
1.
President’s Council of Advisors on Science and Technology “
Report to the President: Accelerating U.S. Advanced Manufacturing
,” President’s Council of Advisors on Science and Technology
, 2014
. https://web.archive.org/web/20200122030413/https://obamawhitehouse.archives.gov/sites/default/files/microsites/ostp/PCAST/amp20_report_final.pdf2.
Kusiak
A.
, “Smart Manufacturing
,” International Journal of Production Research
56
, nos. 1–2
(January 2018
): 508
–517
. https://doi.org/10.1080/00207543.2017.13516443.
National Institute of Standards and Technology “
Smart Manufacturing Operations Planning and Control Program
,” National Institute of Standards and Technology
, 2014
. https://web.archive.org/web/20200122030830/https://www.nist.gov/programs-projects/smart-manufacturing-operations-planning-and-control-program4.
Clean Energy Smart Manufacturing Innovation Institute “
What is Smart Manufacturing?
” Clean Energy Smart Manufacturing Innovation Institute
, 2019
. https://web.archive.org/web/20200122031042/https://www.cesmii.org/what-we-do5.
Nižetić
S.
, Djilali
N.
, Papadopoulos
A.
, and Rodrigues
J. J. P. C.
, “Smart Technologies for Promotion of Energy Efficiency, Utilization of Sustainable Resources and Waste Management
,” Journal of Cleaner Production
231
(September 2019
): 565
–591
. https://doi.org/10.1016/j.jclepro.2019.04.3976.
Kibira
D.
, Brundage
M. P.
, Feng
S.
, and Morris
K. C.
, “Procedure for Selecting Key Performance Indicators for Sustainable Manufacturing
,” Journal of Manufacturing Science and Engineering
140
, no. 1
(November 2018
): 011005. https://doi.org/10.1115/1.40374397.
Jeschke
S.
, Brecher
C.
, Song
H.
, and Rawat
D. B.
, eds., Industrial Internet of Things: Cybermanufacturing Systems
(Berlin
: Springer
, 2017
).8.
Feeney
A. B.
, Frechette
S.
, and Srinivasan
V.
, “Cyber-Physical Systems Engineering for Manufacturing
,” in Industrial Internet of Things
, ed. Jeschke
S.
, Brecher
C.
, Song
H.
, and Rawat
D. B.
(Cham, Switzerland
: Springer Nature
, 2017
), 81
–110
.9.
Lu
Y.
, Morris
K. C.
, and Frechette
S. P.
, Current Standards Landscape for Smart Manufacturing Systems, Report No. NISTIR 8107
(Gaithersburg, MD
: National Institute of Standards and Technology
, 2016
).10.
Standard Guide for Evaluation of Environmental Aspects of Sustainability of Manufacturing Processes
, ASTM E2986-18 (West Conshohocken, PA
: ASTM International
, approved November 1, 2018
). https://doi.org/10.1520/E2986-1811.
Standard Guide for Characterizing Environmental Aspects of Manufacturing Processes
, ASTM E3012-16 (West Conshohocken, PA
: ASTM International
, approved March 1, 2016
). https://doi.org/10.1520/E3012-1612.
ASTM International “
Subcommittee E60.13 on Sustainable Manufacturing: Published Standards under the Jurisdiction of E60.13
,” ASTM International, 2019
. https://web.archive.org/web/20200122031620/https://www.astm.org/COMMIT/SUBCOMMIT/E6013.htm13.
Bernstein
W. Z.
, Subramaniyan
A. B.
, Brodsky
A.
, Garretson
I. C.
, Haapala
K. R.
, Libes
D.
, Morris
K. C.
, et al., “Research Directions for an Open Unit Manufacturing Process Repository: A Collaborative Vision
,” Manufacturing Letters
15
(January 2018
): 71
–75
. https://doi.org/10.1016/j.mfglet.2017.12.00714.
National Institute of Standards and Technology “
RAMP: Reusable Abstractions of Manufacturing Processes
,” National Institute of Standards and Technology, 2018
. https://web.archive.org/web/20200122031821/https://www.nist.gov/news-events/events/2018/01/ramp-reusable-abstractions-manufacturing-processes15.
Overcash
M.
and Twomey
J.
, “Unit Process Life Cycle Inventory (UPLCI) – A Structured Framework to Complete Product Life Cycle Studies
,” in Leveraging Technology for a Sustainable World
, ed. Dornfeld
D. A.
and Linke
B. S.
(Berlin
: Springer
, 2012
), 1
–4
.16.
Kellens
K.
, Dewulf
W.
, Overcash
M.
, Hauschild
M. Z.
, and Duflou
J. R.
, “Methodology for Systematic Analysis and Improvement of Manufacturing Unit Process Life-Cycle Inventory (UPLCI)—CO2PE! Initiative (Cooperative Effort on Process Emissions in Manufacturing). Part 1: Methodology Description
,” International Journal of Life Cycle Assessment
17
, no. 1
(2012
): 69
–78
. https://doi.org/10.1007/s11367-011-0340-417.
Linke
B.
and Overcash
M.
, “Reusable Unit Process Life Cycle Inventory for Manufacturing: Grinding
,” Production Engineering
11
, no. 6
(December 2017
): 643
–653
. https://doi.org/10.1007/s11740-017-0768-x18.
Zhang
H.
and Zhao
F.
, “Reusable Unit Process Life Cycle Inventory for Manufacturing: Gas Metal Arc Welding
,” Production Engineering
13
, no. 1
(February 2019
): 89
–97
. https://doi.org/10.1007/s11740-018-0869-119.
Shankar Raman
A.
, Haapala
K. R.
, and Morris
K. C.
, “Towards a Standards-Based Methodology for Extending Manufacturing Process Models for Sustainability Assessment
,” in 13th International Manufacturing Science and Engineering Conference
(New York
: American Society of Mechanical Engineers
, 2018
), V001T05A024.20.
Brodsky
A.
, Nachawati
M. O.
, Krishnamoorthy
M.
, Bernstein
W. Z.
, and Menascé
D. A.
, “Factory Optima: A Web-Based System for Composition and Analysis of Manufacturing Service Networks Based on a Reusable Model Repository
,” International Journal of Computer Integrated Manufacturing
32
, no. 3
(March 2019
): 206
–224
. https://doi.org/10.1080/0951192X.2019.157080521.
Bernstein
W. Z.
and Lechevalier
D.
, “A Reference Schema for the Unit Manufacturing Process Information Model
,” Journal of Research of National Institute of Standards and Technology
124
(May 2019
): 124011. https://doi.org/10.6028/jres.124.01122.
Agrawal
A.
, Nayak
A.
, Maiti
A.
, Doshi
C.
, Doshi
D.
, and Mohan
D.
, “IdeaBoardz: Brainstorm, Retrospect, Collaborate
,” IdeaBoards, 2009
.23.
Groover
M. P.
, Fundamentals of Modern Manufacturing
(Hoboken, NJ
: Wiley
, 2015
).24.
National Science Foundation “
Understanding How Aluminum Moves around a Friction Stir Welding Tool in Order to Prevent Welding Defects, Award Abstract #1826104
,” National Science Foundation, 2018
. https://web.archive.org/web/20200122062909/https://www.nsf.gov/awardsearch/showAward?AWD_ID=182610425.
Shrivastava
A.
, Dingler
C.
, Zinn
M.
, and Pfefferkorn
F. E.
, “Physics-Based Interpretation of Tool-Workpiece Interface Temperature Signals for Detection of Defect Formation during Friction Stir Welding
,” Manufacturing Letters
5
(August 2015
): 7
–11
. https://doi.org/10.1016/j.mfglet.2015.04.00226.
National Science Foundation “
Joining of Dissimilar Materials through a Novel Hybrid Friction Stir Resistance Spot Welding Process, Award Abstract #1537582
,” National Science Foundation, 2015
. https://web.archive.org/web/20200122062617/https://www.nsf.gov/awardsearch/showAward?AWD_ID=153758227.
Fei
X.
, Jin
X.
, Ye
Y.
, Xiu
T.
, and Yang
H.
, “Effect of Pre-hole Offset on the Property of the Joint during Laser-Assisted Friction Stir Welding of Dissimilar Metals Steel and Aluminum Alloys
,” Materials Science and Engineering: A
653
(January 2016
): 43
–52
. https://doi.org/10.1016/j.msea.2015.11.10128.
Fehrenbacher
A.
, Duffie
N. A.
, Ferrier
N. J.
, Pfefferkorn
F. E.
, and Zinn
M. R.
, “Effects of Tool–Workpiece Interface Temperature on Weld Quality and Quality Improvements through Temperature Control in Friction Stir Welding
,” The International Journal of Advanced Manufacturing Technology
71
(March 2014
): 165
–179
. https://doi.org/10.1007/s00170-013-5364-429.
Fehrenbacher
A.
, Smith
C. B.
, Duffie
N. A.
, Ferrier
N. J.
, Pfefferkorn
F. E.
, and Zinn
M. R.
, “Combined Temperature and Force Control for Robotic Friction Stir Welding
,” Journal of Manufacturing Science and Engineering
136
, no. 2
(April 2014
): 021007. https://doi.org/10.1115/1.402591230.
National Science Foundation “
An Innovative Hybrid Ultrasonic Resistance Welding Process for Joining Advanced Lightweight and Dissimilar Materials, Award Abstract #1853632
,” National Science Foundation, 2019
. https://web.archive.org/web/20200122070735/https://www.nsf.gov/awardsearch/showAward?AWD_ID=185363231.
Yang
J.
and Cao
B.
, “Investigation of Resistance Heat Assisted Ultrasonic Welding of 6061 Aluminum Alloys to Pure Copper
,” Materials & Design
74
(June 2015
): 19
–24
. https://doi.org/10.1016/j.matdes.2015.02.02832.
Liu
H.
, Hu
Y.
, Du
S.
, and Zhao
H.
, “Microstructure Characterization and Mechanism of Acoustoplastic Effect in Friction Stir Welding Assisted by Ultrasonic Vibrations on the Bottom Surface of Workpieces
,” Journal of Manufacturing Processes
42
(June 2019
): 159
–166
. https://doi.org/10.1016/j.jmapro.2019.04.02833.
National Science Foundation “
CAREER: Surface Interactions in Dissimilar Material Joining, Award Abstract #1651024
,” National Science Foundation, 2016
. https://web.archive.org/web/20200122064338/https://www.nsf.gov/awardsearch/showAward?AWD_ID=165102434.
Wang
W.-M.
, Khan
H. A.
, Li
J.
, Miller
S. F.
, and Trimble
A. Z.
, “Classification of Failure Modes in Friction Stir Blind Riveted Lap-Shear Joints with Dissimilar Materials
,” Journal of Manufacturing Science and Engineering
139
, no. 2
(September 2017
): 021005. https://doi.org/10.1115/1.403428035.
Khan
H. A.
, Wang
W.-M.
, Wang
K.
, Li
S.
, Miller
S.
, and Li
J.
, “Investigation of Mechanical Behavior of Dissimilar Material FSBR Joints Exposed to a Marine Environment
,” Journal of Manufacturing Processes
37
(January 2019
): 376
–385
. https://doi.org/10.1016/j.jmapro.2018.12.01136.
Lee
T.
, Zhang
S.
, Vivek
A.
, Kinsey
B.
, and Daehn
G.
, “Flyer Thickness Effect in the Impact Welding of Aluminum to Steel
,” Journal of Manufacturing Science and Engineering
140
, no. 12
(September 2018
): 121002. https://doi.org/10.1115/1.404124737.
National Science Foundation “
CAREER: Vibration-Assisted Laser Keyhole Welding to Improve Joint Properties, Award Abstract #1752218
,” National Science Foundation, 2018
. https://web.archive.org/web/20200122070935/https://nsf.gov/awardsearch/showAward?AWD_ID=175221838.
National Science Foundation “
CAREER: Material Removal Mechanism of Ceramic Materials in Ultra-Precision Machining, Award Abstract #1844821
,” National Science Foundation, 2019
. https://web.archive.org/web/20200122070913/https://www.nsf.gov/awardsearch/showAward?AWD_ID=184482139.
Mizumoto
Y.
, Maas
P.
, Kakinuma
Y.
, and Min
S.
, “Investigation of the Cutting Mechanisms and the Anisotropic Ductility of Monocrystalline Sapphire
,” CIRP Annals
66
, no. 1
(2017
): 89
–92
. https://doi.org/10.1016/j.cirp.2017.04.01840.
Yoon
H.-S.
, Kwon
S. B.
, Nagaraj
A.
, Lee
S.
, and Min
S.
, “Study of Stress Intensity Factor on the Anisotropic Machining Behavior of Single Crystal Sapphire
,” CIRP Annals
67
, no. 1
(2018
): 125
–128
. https://doi.org/10.1016/j.cirp.2018.04.11441.
Weber
D.
, Kirsch
B.
, D’Elia
C. R.
, Linke
B. S.
, Hill
M. R.
, and Aurich
J. C.
, “Concept to Analyze Residual Stresses in Milled Thin Walled Monolithic Aluminum Components and Their Effect on Part Distortion
,” in Ninth Congress of the German Academic Association for Production Technology (WGP)
(Cham, Switzerland
: Springer Nature
, 2019
), 287
–296
.42.
Chighizola
C. R.
, D’Elia
C. R.
, and Hill
M. R.
, “Intermethod Comparison and Evaluation of Near Surface Residual Stress in Aluminum Parts Subject to Various Milling Parameters
,” in Proceedings of the 2019 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Extended Abstract (Reno, NV: Society for Experimental Mechanics, 2019
), 6.43.
Raval
J.
, Hung
W. N. P.
, and Tai
B. L.
, “Multiphase Flow Distribution in MQL Drilling Using Optical Intensity Distribution Based Approach
,” in 14th International Manufacturing Science and Engineering Conference
(New York
: American Society of Mechanical Engineers
, 2019
), V002T03A033.44.
Mujumdar
S. S.
, Kapoor
S. G.
, and Curreli
D.
, “Experimental Investigation of Atomized Dielectric-Based MicroEDM Plasma Characteristics
” (paper presentation, World Congress on Micro and Nano Manufacturing, Kaohsiung, Taiwan, March 27–30, 2017
).45.
National Science Foundation “
Boosting the Speed and Accuracy of Vibration-Prone Manufacturing Machines at Low Cost through Software, Award Abstract #1825133
,” National Science Foundation, 2018
. https://web.archive.org/web/20200122072201/https://www.nsf.gov/awardsearch/showAward?AWD_ID=182513346.
Dong
X.
and Okwudire
C. E.
, “Semi-active Joint for Ultra-Precision Positioning Using Sliding/Rolling Bearings
,” CIRP Annals
68
, no. 1
(2019
): 385
–388
. https://doi.org/10.1016/j.cirp.2019.04.02147.
Duan
M.
, Yoon
D.
, and Okwudire
C. E.
, “A Limited-Preview Filtered B-Spline Approach to Tracking Control—With Application to Vibration-Induced Error Compensation of a 3D Printer
,” Mechatronics
56
(December 2018
): 287
–296
. https://doi.org/10.1016/j.mechatronics.2017.09.00248.
National Science Foundation “
CAREER: Breaking the Freeform Optics Metrology Barrier with Synthetic Wavelength Interferometry, Award Abstract #1851739
,” National Science Foundation, 2018
. https://web.archive.org/web/20200122071809/https://nsf.gov/awardsearch/showAward?AWD_ID=185173949.
Villarraga-Gómez
H.
, Lee
C.
, and Smith
S. T.
, “Dimensional Metrology with X-ray CT: A Comparison with CMM Measurements on Internal Features and Compliant Structures
,” Precision Engineering
51
(January 2018
): 291
–307
. https://doi.org/10.1016/j.precisioneng.2017.08.02150.
Wang
C.
, Zhong
F.
, and Ellis
J. D.
, “Two-Dimensional Straightness Measurement Based on Optical Knife-Edge Sensing
,” Review of Scientific Instruments
88
, no. 9
(September 2017
): 095109. https://doi.org/10.1063/1.500271151.
Lee
C.
, Zolfaghari
A.
, Kim
G. H.
, and Jeon
S.
, “An Optical Measurement Technique for Dynamic Stiffness and Damping of Precision Spindle System
,” Measurement
131
(January 2019
): 61
–68
. https://doi.org/10.1016/j.measurement.2018.08.04952.
Ellis
J. D.
, Brooks
D. R.
, Wozniak
K. T.
, Gandara-Montano
G. A.
, Fox
E. G.
, Tinkham
K. J.
, Butler
S. C.
, et al., “Manufacturing of Gradient Index Lenses for Ophthalmic Applications
,” in Optical Design and Fabrication 2017 (Freeform, IODC, OFT)
(Washington, DC
: The Optical Society
, 2017
), OW1B.3.53.
Crall
M. D.
, Laney
S. F.
, and Keller
M. W.
, “Multimodal Damage Detection in Self-Sensing Fiber Reinforced Composites
,” Advanced Functional Materials
29
, no. 12
(February 2019
): 1806634. https://doi.org/10.1002/adfm.20180663454.
Feng
S. C.
, Bernstein
W. Z.
, Hedberg
T.
, and Feeney
A. B.
, “Toward Knowledge Management for Smart Manufacturing
,” Journal of Computing and Information Science in Engineering
17
, no. 3
(September 2017
): 031016. https://doi.org/10.1115/1.403717855.
Yao
H.
, Ren
Y.
, and Liu
Y.
, “FEA-Net: A Deep Convolutional Neural Network with Physics Prior for Efficient Data Driven PDE Learning
,” in AIAA Scitech 2019 Forum
(San Diego, CA
: American Institute of Aeronautics and Astronautics
, 2019
), 1
–11
. https://doi.org/10.2514/6.2019-068056.
Esmaeilian
B.
, Behdad
S.
, and Wang
B.
, “The Evolution and Future of Manufacturing: A Review
,” Journal of Manufacturing Systems
39
(April 2016
): 79
–100
. https://doi.org/10.1016/j.jmsy.2016.03.00157.
Cooper
K. P.
and Wachter
R. F.
, “Nanomanufacturing: Path to Implementing Nanotechnology
,” International Journal of Nanomanufacturing
9
, nos. 5–6
(2013
): 540
–554
. https://doi.org/10.1504/IJNM.2013.05759858.
Li
L.
, Hong
M.
, Schmidt
M.
, Zhong
M.
, Malshe
A.
, Huis in’tVeld
B.
, and Kovalenko
V.
, “Laser Nano-Manufacturing– State of the Art and Challenges
,” CIRP Annals
60
, no. 2
(2011
): 735
–755
. https://doi.org/10.1016/j.cirp.2011.05.00559.
Liddle
J. A.
and Gallatin
G. M.
, “Nanomanufacturing: A Perspective
,” ACS Nano
10
, no. 3
(February 2016
): 2995
–3014
. https://doi.org/10.1021/acsnano.5b0329960.
Cooper
K.
, “Scalable Nanomanufacturing—A Review
,” Micromachines
8
, no. 1
(January 2017
): 20. https://doi.org/10.3390/mi801002061.
Busnaina
A. A.
, Mead
J.
, Isaacs
J.
, and Somu
S.
, “Nanomanufacturing and Sustainability: Opportunities and Challenges
,” in Nanotechnology for Sustainable Development
(Cham, Switzerland
: Springer Nature
, 2013
), 331
–336
.62.
Dimov
S.
, Brousseau
E.
, Minev
R.
, and Bigot
S.
, “Micro- and Nano-Manufacturing: Challenges and Opportunities
,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
226
, no. 1
(January 2012
): 3
–15
.63.
Morita
S.
, Giessibl
F. J.
, Meyer
E.
, and Wiesendanger
R.
, eds., Noncontact Atomic Force Microscopy
(Cham, Switzerland
: Springer International Publishing
, 2015
).64.
Bukkapatnam
S.
, Kamarthi
S.
, Huang
Q.
, Zeid
A.
, and Komanduri
R.
, “Nanomanufacturing Systems: Opportunities for Industrial Engineers
,” IIE Transactions
44
, no. 7
(July 2012
): 492
–495
. https://doi.org/10.1080/0740817X.2012.65831565.
Hornyak
G. L.
, Moore
J. J.
, Tibbals
H. F.
, and Dutta
J.
, Fundamentals of Nanotechnology
(Boca Raton, FL
: CRC Press
, 2008
).66.
Chen
Y.
, Wang
Z.
, He
Y.
, Yoon
Y. J.
, Jung
J.
, Zhang
G.
, and Lin
Z.
, “Light-Enabled Reversible Self-Assembly and Tunable Optical Properties of Stable Hairy Nanoparticles
,” Proceedings of the National Academy of Sciences
115
, no. 7
(February 2018
): E1391
–E1400
. https://doi.org/10.1073/pnas.171474811567.
Chen
Y.
, Yang
D.
, Yoon
Y. J.
, Pang
X.
, Wang
Z.
, Jung
J.
, He
Y.
, et al., “Hairy Uniform Permanently Ligated Hollow Nanoparticles with Precise Dimension Control and Tunable Optical Properties
,” Journal of the American Chemical Society
139
, no. 37
(August 2017
): 12956
–12967
. https://doi.org/10.1021/jacs.7b0454568.
Li
X.
, Li
B.
, He
M.
, Wang
W.
, Wang
T.
, Wang
A.
, Yu
J.
, et al., “Convenient and Robust Route to Photoswitchable Hierarchical Liquid Crystal Polymer Stripes via Flow-Enabled Self-Assembly
,” ACS Applied Materials & Interfaces
10
, no. 5
(January 2018
): 4961
–4670
. https://doi.org/10.1021/acsami.7b1600169.
National Science Foundation “
Network for Computational Nanotechnology– Hierarchical nanoMFG Node, Award Abstract #1720701
,” National Science Foundation, 2017
. https://web.archive.org/web/20200122071134/https://www.nsf.gov/awardsearch/showAward?AWD_ID=172070170.
Standard Terminology for Additive Manufacturing Technologies
(Withdrawn 2015), ASTM F2792-12a (West Conshohocken, PA: ASTM International
, approved March 1, 2012
). https://doi.org/10.1016/j.mattod.2017.07.00171.
Huang
Y.
, Leu
M. C.
, Mazumder
J.
, and Donmez
A.
, “Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
,” Journal of Manufacturing Science and Engineering
137
(February 2015
): 014001. https://doi.org/10.1115/1.402872572.
Gibson
I.
, Rosen
D.
, and Stucker
B.
, Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing
, 2nd ed. (New York
: Springer
, 2015
).73.
Nagarajan
H. P. N.
, Malshe
H. A.
, Haapala
K. R.
, and Pan
Y.
, “Environmental Performance Evaluation of a Fast Mask Image Projection Stereolithography Process through Time and Energy Modeling
,” Journal of Manufacturing Science and Engineering
138
, no. 10
(October 2016
): 101004. https://doi.org/10.1115/1.403375674.
Chen
L.
, He
Y.
, Yang
Y.
, Niu
S.
, and Ren
H.
, “The Research Status and Development Trend of Additive Manufacturing Technology
,” International Journal of Advanced Manufacturing Technology
89
, nos. 9–12
(April 2017
): 3651
–3660
. https://doi.org/10.1007/s00170-016-9335-475.
Leung
Y.-S.
, Kwok
T.-H.
, Li
X.
, Yang
Y.
, Wang
C. C. L.
, and Chen
Y.
, “Challenges and Status on Design and Computation for Emerging Additive Manufacturing Technologies
,” Journal of Computing and Information Science in Engineering
19
, no. 2
(June 2019
): 021013. https://doi.org/10.1115/1.404191376.
National Science Foundation “
CAREER: Mask Video Projection Based Additive Manufacturing at the Micro-Scale over Large Areas, Award Abstract #1151191
,” National Science Foundation, 2012
. https://web.archive.org/web/20200122071217/https://www.nsf.gov/awardsearch/showAward?AWD_ID=115119177.
National Science Foundation “
Additive Manufacturing of Controlled Anisotropic Materials via Electrically Assisted Nanocomposite Fabrication, Award Abstract #1663663
,” National Science Foundation, 2017
. https://web.archive.org/web/20200122071405/https://www.nsf.gov/awardsearch/showAward?AWD_ID=166366378.
National Science Foundation “
Collaborative Research: Towards a Fundamental Understanding of a Simple, Effective and Robust Approach for Mitigating Friction in Nanopositioning Stages, Award Abstract #1855354
,” National Science Foundation, 2019
. https://web.archive.org/web/20200122071436/https://www.nsf.gov/awardsearch/showAward?AWD_ID=185535479.
National Science Foundation “
Vibration Assisted Nanopositioning: An Enabler of Low-Cost, High-Throughput Nanotech Processes, Award Abstract #1562297
,” National Science Foundation, 2016
. https://web.archive.org/web/20200122072108/https://www.nsf.gov/awardsearch/showAward?AWD_ID=156229780.
National Science Foundation “
CAREER: Pushing the Boundaries: Advancing the Science of Micro-Additive Manufacturing, Award Abstract 1351469
,” National Science Foundation, 2014
. https://web.archive.org/web/20200122071505/https://www.nsf.gov/awardsearch/showAward?AWD_ID=135146981.
National Science Foundation “
Collaborative Research: A Novel Control Strategy for 3D Printing of Micro-Scale Devices, Award Abstract #1434693
,” National Science Foundation, 2014
. https://web.archive.org/web/20200122073008/https://nsf.gov/awardsearch/showAward?AWD_ID=143469382.
National Science Foundation “
High Fidelity Additive Manufacturing at the Micro-Scale, Award Abstract #1334204
,” National Science Foundation, 2013
. https://web.archive.org/web/20200122072006/https://nsf.gov/awardsearch/showAward?AWD_ID=133420483.
National Science Foundation “
SNM: Manufacturing Autonomy for Directed Evolution of Materials (MADE-Materials) for Robust, Scalable Nanomanufacturing, NSF Award #1727894
,” National Science Foundation, 2017
. https://web.archive.org/web/20200122071940/https://nsf.gov/awardsearch/showAward?AWD_ID=172789484.
Rejeski
D.
, Zhao
F.
, and Huang
Y.
, “Research Needs and Recommendations on Environmental Implications of Additive Manufacturing
,” Additive Manufacturing
19
(January 2018
): 21
–28
. https://doi.org/10.1016/j.addma.2017.10.01985.
Ngo
T. D.
, Kashani
A.
, Imbalzano
G.
, Nguyen
K. T. Q.
, and Hui
D.
, “Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges
,” Composites Part B: Engineering
143
(June 2018
): 172
–196
. https://doi.org/10.1016/j.compositesb.2018.02.01286.
Abdulhameed
O.
, Al-Ahmari
A.
, Ameen
W.
, and Mian
S. H.
, “Additive Manufacturing: Challenges, Trends, and Applications
,” Advances in Mechanical Engineering
11
, no. 2
(February 2019
): 1
–27
. https://doi.org/10.1177/168781401882288087.
Tao
F.
, Qi
Q.
, Liu
A.
, and Kusiak
A.
, “Data-Driven Smart Manufacturing
,” Journal of Manufacturing Systems
48
(July 2018
): 157
–169
. https://doi.org/10.1016/j.jmsy.2018.01.00688.
Smullin
M. M.
, Haapala
K. R.
, Mani
M.
, and Morris
K. C.
, “Using Industry Focus Groups and Literature Review to Identify Challenges in Sustainable Assessment Theory and Practice
,” in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
(New York
: American Society of Mechanical Engineers
, 2016
), V004T05A048.89.
Lee
J.
, Bagheri
B.
, and Kao
H.-A.
, “A Cyber-Physical Systems Architecture for Industry 4.0-Based Manufacturing Systems
,” Manufacturing Letters
3
(January 2015
): 18
–23
. https://doi.org/10.1016/j.mfglet.2014.12.00190.
Mani
M.
, Madan
J.
, Lee
J. H.
, Lyons
K. W.
, and Gupta
S. K.
, “Sustainability Characterization for Manufacturing Processes
,” International Journal of Production Research
52
, no. 20
(February 2014
): 5895
–5912
. https://doi.org/10.1080/00207543.2014.88678891.
Bernstein
W. Z.
, Mani
M.
, Lyons
K. W.
, Morris
K. C.
, and Johansson
B.
, “An Open Web-Based Repository for Capturing Manufacturing Process Information
,” in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
(New York
: American Society of Mechanical Engineers
, 2016
), V004T05A028.92.
Choi
S.
, Jung
K.
, Kulvatunyou
B.
, and Morris
K. C.
, “An Analysis of Technologies and Standards for Designing Smart Manufacturing Systems
,” Journal of Research of the National Institute of Standards and Technology
121
(2016
): 422
–433
. https://doi.org/10.6028/jres.121.02193.
Hankel
M.
and Rexroth
B.
, The Reference Architectural Model Industrie 4.0 (RAMI 4.0)
(Frankfurt am Main, Germany
: Zentralverband Elektrotechnik- und Elektronikindustrie
, 2015
).94.
Ouelhadj
D.
and Petrovic
S.
, “A Survey of Dynamic Scheduling in Manufacturing Systems
,” Journal of Scheduling
12
, no. 4
(August 2009
): 417
–431
. https://doi.org/10.1007/s10951-008-0090-895.
American Society of Mechanical Engineers “
Verification, Validation and Uncertainty Quantification (VVUQ)
,” American Society of Mechanical Engineers, 2019
. https://web.archive.org/web/20200122070019/https://www.asme.org/codes-standards/publications-information/verification-validation-uncertainty96.
Seliger
G.
, Khraisheh
M. M. K.
, and Jawahir
I. S.
, eds., Advances in Sustainable Manufacturing
(Berlin
: Springer
, 2011
).97.
Cunliff
C.
, An Innovation Agenda for Deep Decarbonization: Bridging Gaps in the Federal Energy RD&D Portfolio
(Washington, DC
: Information Technology & Innovation Foundation
, 2018
).98.
Center for Climate and Energy Solutions “
Decarbonizing U.S. Industry
,” Center for Climate and Energy Solutions, 2018
. https://web.archive.org/web/20200122070124/https://www.c2es.org/document/decarbonizing-u-s-industry99.
Environmental Management Systems—Requirements with Guidance for Use
, ISO 14001:2015 (Geneva, Switzerland
: International Organization for Standardization
, 2015
).100.
Mani
M.
, Larborn
J.
, Johansson
B.
, Lyons
K. W.
, and Morris
K. C.
, “Standard Representations for Sustainability Characterization of Industrial Processes
,” Journal of Manufacturing Science and Engineering
138
, no. 10
(October 2016
): 101008. https://doi.org/10.1115/1.4033922101.
Mani
M.
, Morris
K.
, Lyons
K. W.
, and Bernstein
W. Z.
, “Reusable Models of Manufacturing Processes for Discrete, Batch, and Continuous Production
,” Journal of the Washington Academy of Sciences
104
, no. 4
(winter 2018
): 21
–30
.102.
Choi
D.
, “Standards in Public Policy and Education
,” ASTM Standardization News
(October 2013
): 20
–22
.103.
Ramanujan
D.
, Zhou
N.
, and Ramani
K.
, “Integrating Environmental Sustainability in Undergraduate Mechanical Engineering Courses Using Guided Discovery Instruction
,” Journal of Cleaner Production
207
(January 2019
): 190
–203
. https://doi.org/10.1016/j.jclepro.2018.09.191104.
Reber
R.
, Canning
E. A.
, and Harackiewicz
J. M.
, “Personalized Education to Increase Interest
,” Current Directions in Psychological Science
27
, no. 6
(December 2018
): 449
–454
. https://doi.org/10.1177/0963721418793140105.
Brundage
M. P.
, Bernstein
W. Z.
, Hoffenson
S.
, Chang
Q.
, Nishi
H.
, Kliks
T.
, and Morris
K. C.
, “Analyzing Environmental Sustainability Methods for Use Earlier in the Product Lifecycle
,” Journal of Cleaner Production
187
(June 2018
): 877
–892
. https://doi.org/10.1016/j.jclepro.2018.03.187106.
Kumar
V.
, Haapala
K. R.
, Rivera
J. L.
, Hutchins
M. J.
, Endres
W. J.
, Gershenson
J. K.
, Michalek
D. J.
, and Sutherland
J. W.
, “Infusing Sustainability Principles into Manufacturing/Mechanical Engineering Curricula
,” Journal of Manufacturing Systems
24
, no. 3
(2005
): 215
–225
. https://doi.org/10.1016/S0278-6125(06)80011-7107.
Rebouillat
L.
, Barletta
I.
, Johansson
B.
, Mani
M.
, Bernstein
W. Z.
, Morris
K. C.
, and Lyons
K. W.
, “Understanding Sustainability Data through Unit Manufacturing Process Representations: A Case Study on Stone Production
,” Procedia CIRP
57
(2016
): 686
–691
. https://doi.org/10.1016/j.procir.2016.11.119108.
Sacks
R.
and Barak
R.
, “Teaching Building Information Modeling as an Integral Part of Freshman Year Civil Engineering Education
,” Journal of Professional Issues in Engineering Education and Practice
136
, no. 1
(January 2010
): 30
–38
. https://doi.org/10.1061/(ASCE)EI.1943-5541.0000003109.
Sacks
R.
and Pikas
E.
, “Building Information Modeling Education for Construction Engineering and Management. I: Industry Requirements, State of the Art, and Gap Analysis
,” Journal of Construction Engineering and Management
139
, no. 11
(November 2013
): 04013016. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000759110.
Irizarry
J.
, Meadati
P.
, Barham
W. S.
, and Akhnoukh
A.
, “Exploring Applications of Building Information Modeling for Enhancing Visualization and Information Access in Engineering and Construction Education Environments
,” International Journal of Construction Education and Research
8
, no. 2
(May 2012
): 119
–145
. https://doi.org/10.1080/15578771.2011.647247111.
Zimmerman
J. B.
and Vanegas
J.
, “Using Sustainability Education to Enable the Increase of Diversity in Science, Engineering and Technology-Related Disciplines
,” The International Journal of Engineering Education
23
, no. 2
(2007
): 242
–253
.112.
Klotz
L.
, Potvin
G.
, Godwin
A.
, Cribbs
J.
, Hazari
Z.
, and Barclay
N.
, “Sustainability as a Route to Broadening Participation in Engineering
,” Journal of Engineering Education
103
, no. 1
(January 2014
): 137
–153
. https://doi.org/10.1002/jee.20034113.
Clark
C. J.
II and Gragg
R. S.
III, “Evaluation of Initial Environmental Engineering Sustainability Course at a Minority Serving Institution
,” Sustainability: The Journal of Record
4
, no. 6
(2011
): 297
–302
. https://doi.org/10.1089/SUS.2011.9646114.
McCormick
M.
, Bielefeldt
A. R.
, Swan
C. W.
, and Paterson
K. G.
, “Assessing Students’ Motivation to Engage in Sustainable Engineering
,” International Journal of Sustainability in Higher Education
16
, no. 2
(2015
): 136
–154
. https://doi.org/10.1108/IJSHE-06-2013-0054115.
Thürer
M.
, Tomašević
I.
, Stevenson
M.
, Qu
T.
, and Huisingh
D.
, “A Systematic Review of the Literature on Integrating Sustainability into Engineering Curricula
,” Journal of Cleaner Production
181
(April 2018
): 608
–617
. https://doi.org/10.1016/j.jclepro.2017.12.130116.
Raoufi
K.
, Park
K.
, Khan
M. T. H.
, Haapala
K. R.
, Psenka
C. E.
, Jackson
K. L.
, Kremer
G. E. O.
, and Kim
K.-Y.
, “A Cyberlearning Platform for Enhancing Undergraduate Engineering Education in Sustainable Product Design
,” Journal of Cleaner Production
211
(February 2019
): 730
–741
. https://doi.org/10.1016/j.jclepro.2018.11.085117.
Ferster
B.
, Teaching Machines: Learning from the Intersection of Education and Technology
(Baltimore, MD
: John Hopkins University Press
, 2014
).118.
Oprescu
F.
, Jones
C.
, and Katsikitis
M.
, “I PLAY AT WORK—Ten Principles for Transforming Work Processes through Gamification
,” Frontiers in Psychology
5
(January 2014
): 14. https://doi.org/10.3389/fpsyg.2014.00014119.
Markopoulos
A. P.
, Fragkou
A.
, Kasidiaris
P. D.
, and Davim
J. P.
, “Gamification in Engineering Education and Professional Training
,” International Journal of Mechanical Engineering Education
43
, no. 2
(April 2015
): 118
–131
. https://doi.org/10.1177/0306419015591324120.
Korn
O.
and Schmidt
A.
, “Gamification of Business Processes: Re-designing Work in Production and Service Industry
,” Procedia Manufacturing
3
(2015
): 3424
–3431
. https://doi.org/10.1016/j.promfg.2015.07.616121.
Paravizo
E.
, Chaim
O. C.
, Braatz
D.
, Muschard
B.
, and Rozenfeld
H.
, “Exploring Gamification to Support Manufacturing Education on Industry 4.0 as an Enabler for Innovation and Sustainability
,” Procedia Manufacturing
21
(2018
): 438
–445
. https://doi.org/10.1016/j.promfg.2018.02.142122.
Despeisse
M.
, “Teaching Sustainability Leadership in Manufacturing: A Reflection on the Educational Benefits of the Board Game Factory Heroes
,” Procedia CIRP
69
(2018
): 621
–626
. https://doi.org/10.1016/j.procir.2017.11.130123.
Wise
J.
, “4 Times Before the Boeing 737 Max 8 That Plane Automation Software Went Haywire
,” Popular Mechanics
, 2019
. https://web.archive.org/web/20200122070223/https://www.popularmechanics.com/flight/airlines/a26854898/plane-automation-crashes-incidents124.
Oliver
N.
, Calvard
T.
, and Potočnik
K.
, “The Tragic Crash of Flight AF447 Shows the Unlikely but Catastrophic Consequences of Automation
,” Harvard Business Review, 2017
. https://web.archive.org/web/20200122070331/https://hbr.org/2017/09/the-tragic-crash-of-flight-af447-shows-the-unlikely-but-catastrophic-consequences-of-automation125.
Oborski
P.
, “Man-Machine Interactions in Advanced Manufacturing Systems
,” International Journal of Advanced Manufacturing Technology
23
, no. 3
(February 2004
): 227
–232
. https://doi.org/10.1007/s00170-003-1574-5126.
Gorecky
D.
, Schmitt
M.
, Loskyll
M.
, and Zühlke
D.
, “Human-Machine-Interaction in the Industry 4.0 Era
,” in 12th IEEE International Conference on Industrial Informatics
(Piscataway, NJ
: Institute of Electrical and Electronics Engineers
, 2014
), 289
–294
.
This content is only available via PDF.
This work is not subject to copyright law
You do not currently have access to this content.
