Skip Nav Destination
Issues
October 2012
ISSN 0094-9930
EISSN 1528-8978
Codes and Standards
High Temperature Design and Damage Evaluation of MOD.9Cr-1Mo Steel Heat Exchanger
J. Pressure Vessel Technol. October 2012, 134(5): 051101.
doi: https://doi.org/10.1115/1.4005938
Topics:
Creep
,
Damage
,
Design
,
Fatigue
,
Finite element analysis
,
Heat exchangers
,
High temperature
,
Sodium
,
Steel
,
Stress
Design and Analysis
Finite Element Study on the Optimization of an Orthotropic Composite Toroidal Shell
J. Pressure Vessel Technol. October 2012, 134(5): 051201.
doi: https://doi.org/10.1115/1.4005873
Topics:
Composite materials
,
Fibers
,
Finite element analysis
,
Finite element model
,
Laminates
,
Optimization
,
Shells
,
Stress
,
Geometry
,
Epoxy adhesives
Implementing Realistic, Nonlinear, Material Stress–Strain Behavior in ANSYS for the Autofrettage of Thick-Walled Cylinders
J. Pressure Vessel Technol. October 2012, 134(5): 051202.
doi: https://doi.org/10.1115/1.4006909
Topics:
Autofrettage
,
Stress
,
Plane strain
,
Finite element analysis
Investigation of Driving Force Variation During Swage Autofrettage, Using Finite Element Analysis
J. Pressure Vessel Technol. October 2012, 134(5): 051203.
doi: https://doi.org/10.1115/1.4006922
Topics:
Autofrettage
,
Deformation
,
Finite element analysis
,
Friction
,
Geometry
,
Stress
,
Modeling
Influence Coefficients of Stress Intensity Factors for Curved Tubing With a Semi-Elliptical Crack
J. Pressure Vessel Technol. October 2012, 134(5): 051204.
doi: https://doi.org/10.1115/1.4006857
Topics:
Autofrettage
,
Fracture (Materials)
,
Stress
,
Tubing
,
Residual stresses
,
Boundary element methods
,
Polynomials
Isochronous Stress–Strain Method With General State of Stress and Variable Loading Conditions for Creep Evaluation
J. Pressure Vessel Technol. October 2012, 134(5): 051205.
doi: https://doi.org/10.1115/1.4007038
Materials and Fabrication
Paris Fatigue Life Modeling of Pressure Vessel Service Simulation Tests
J. Pressure Vessel Technol. October 2012, 134(5): 051401.
doi: https://doi.org/10.1115/1.4006908
Topics:
Autofrettage
,
Fatigue life
,
Pressure vessels
,
Stress
,
Vessels
,
Residual stresses
,
Simulation
,
Modeling
,
Steel
Natural Crack Growth Analyses for Circumferential and Axial PWSCC Defects in Dissimilar Metal Welds
J. Pressure Vessel Technol. October 2012, 134(5): 051402.
doi: https://doi.org/10.1115/1.4007040
Topics:
Fracture (Materials)
,
Stress
Equivalent CTOD Ratio β for Engineering Assessment of CTOD Correction for Constraint Loss
J. Pressure Vessel Technol. October 2012, 134(5): 051403.
doi: https://doi.org/10.1115/1.4006346
Improved Incremental J-Integral Equations for Determining Crack Growth Resistance Curves
J. Pressure Vessel Technol. October 2012, 134(5): 051404.
doi: https://doi.org/10.1115/1.4005945
Topics:
ASTM International
,
Fracture (Materials)
,
Displacement
,
Approximation
,
Stress
NDE
Residual Stress Measurements in an Autofrettage Tube Using Hole Drilling Method
J. Pressure Vessel Technol. October 2012, 134(5): 051501.
doi: https://doi.org/10.1115/1.4007072
Topics:
Autofrettage
,
Stress
,
Drilling
,
Residual stresses
Extracting Quantitative Information on Pipe Wall Damage in Absence of Clear Signals From Defect
J. Pressure Vessel Technol. October 2012, 134(5): 051502.
doi: https://doi.org/10.1115/1.4005877
Topics:
Pipes
,
Signals
,
Wave packets
,
Waves
,
Damage
,
Transducers
Operations, Applications & Components
Statistical Sampling for In-Service Inspection of Underground Storage Tanks (PVP2011-57011)
J. Pressure Vessel Technol. October 2012, 134(5): 051601.
doi: https://doi.org/10.1115/1.4005935
Topics:
Corrosion
,
In-service inspection
,
Inspection
,
Sampling methods
,
Strips
,
Probability
,
Wall thickness
,
Service life (Equipment)
,
Safety
Pipeline Systems
Probabilistic Transgranular Stress Corrosion Cracking Analysis for Oil and Gas Pipelines
J. Pressure Vessel Technol. October 2012, 134(5): 051701.
doi: https://doi.org/10.1115/1.4006125
Topics:
Failure
,
Fracture (Materials)
,
Stress
,
American Petroleum Institute
,
Pipes
,
Design
,
Pipelines
,
Stress corrosion cracking
,
Probability
Optimization of Pipe Repair Sleeve Design
A. F. M. Arif, Yaqoub N. Al-Nassar, Hussain Al-Qahtani, Shafique M. A. Khan, Muhammad Anis, A. M. Eleiche, Muhammad Inam, Nadhir I. Al-Nasri, Hussain M. Al-Muslim
J. Pressure Vessel Technol. October 2012, 134(5): 051702.
doi: https://doi.org/10.1115/1.4006126
Topics:
Maintenance
,
Optimization
,
Pipes
,
Pressure
,
Failure
,
Design
,
Finite element analysis
Seismic Engineering
Sloshing Response of Floating Roofed Liquid Storage Tanks Subjected to Earthquakes of Different Types
J. Pressure Vessel Technol. October 2012, 134(5): 051801.
doi: https://doi.org/10.1115/1.4006858
Topics:
Earthquakes
,
Roofs
,
Sloshing
,
Storage tanks
,
Excitation
,
Stress
Technical Briefs
Review of Corrosion Role in Gas Pipeline and Some Methods for Preventing It
J. Pressure Vessel Technol. October 2012, 134(5): 054501.
doi: https://doi.org/10.1115/1.4006124
Topics:
Cathodic protection
,
Corrosion
,
Pipelines
,
Inspection
A Novel Comparison of Design-by-Analysis Methods
J. Pressure Vessel Technol. October 2012, 134(5): 054502.
doi: https://doi.org/10.1115/1.4006343
An Empirical Formula for Stress Intensity Factors of Double Edge Half-Circular-Hole Cracks in a Rectangular Sheet in Tension
J. Pressure Vessel Technol. October 2012, 134(5): 054503.
doi: https://doi.org/10.1115/1.4005936
Topics:
Fracture (Materials)
,
Stress
,
Tension
Fuel Power Density
J. Pressure Vessel Technol. October 2012, 134(5): 054504.
doi: https://doi.org/10.1115/1.4006906
Topics:
Fuels
,
Pipelines
,
Power density
,
Density
Email alerts
RSS Feeds
The Behavior of Elbow Elements at Pure Bending Applications Compared to Beam and Shell Element Models
J. Pressure Vessel Technol (February 2025)