Abstract
Residual stress prediction and controlling is important for structural integrity assessment of weldments. In this work, finite element (FE) and experimental methods were integrated to study the influence of welding sequence on the SUS304/Q235 bimetallic clad plate (BCP) joints during multilayer and multipass welding. The results show that the peak residual stress values on flyer plate surface are weakly affected by welding sequences but the width of high surficial longitudinal stress area of joint with base layer welded first is bigger. Meanwhile, welding sequence has a great influence on the longitudinal residual stress evolution law inside joints. When base seam layer is welded first, the highest stress concentration appears in the transition layer. However, it would be transferred into the first base seam layer due to martensite phase transformation when flyer seam layer is welded first. Residual stress controlling in the BCP joint should attract more attention from researchers.
Issue Section:
Materials and Fabrication
References
1.
Lidbury
,
D.
, 1984
, “
The Significance of Residual Stresses in Relation to the Integrity of LWR Pressure Vessels
,” Int. J. Pressure Vessels Piping
,
17
(4
), pp. 197
–328
.10.1016/0308-0161(84)90028-02.
Kang
,
K.
,
Kawahito
,
Y.
,
Gao
,
M.
, and
Zeng
,
X. Y.
, 2017
, “
Effects of Laser-Arc Distance on Corrosion Behavior of Single-Pass Hybrid Welded Stainless Clad Steel Plate
,” Mater. Des.
,
123
, pp. 80
–88
.10.1016/j.matdes.2017.03.0493.
Yu
,
W. X.
,
Liu
,
B. X.
,
Chen
,
C. X.
,
Liu
,
M. Y.
,
Zhang
,
X.
,
Fang
,
W.
,
Ji
,
P. G.
,
He
,
N. J.
, and
Yin
,
F. X.
, 2020
, “
Microstructure and Mechanical Properties of Bimetallic Clad Plate Welding Joints by Different Welding Processes
,” Sci. Technol. Weld. Joining
,
25
(7
), pp. 571
–580
.10.1080/13621718.2020.17749954.
An
,
Q.
,
Fan
,
K. Y.
,
Ge
,
Y. F.
,
Liu
,
B. X.
,
Liu
,
Y. C.
,
Wang
,
S.
,
Chen
,
C. X.
,
Ji
,
P. G.
, and
Yin
,
F. X.
, 2020
, “
Microstructure and Mechanical Properties of Stainless Steel Clad Plate Joints Produced by TIG and MAG Hybrid Welding
,” J. Adhes. Sci. Technol.
,
34
(6
), pp. 670
–685
.10.1080/01694243.2019.16770875.
Gou
,
N. N.
,
Zhang
,
J. X.
,
Wang
,
J. L.
, and
Bi
,
Z. Y.
, 2017
, “
Butt Welding of 2205/X65 Bimetallic Sheet and Study on the Inhomogeneity of the Properties of the Welded Joint
,” J. Mater. Eng. Perform.
,
26
(4
), pp. 1801
–1807
.10.1007/s11665-017-2549-26.
Dhib
,
Z.
,
Guermazi
,
N.
,
Gaspérini
,
M.
, and
Haddar
,
N.
, 2016
, “
Cladding of Low-Carbon Steel to Austenitic Stainless Steel by Hot-Roll Bonding: Microstructure and Mechanical Properties Before and After Welding
,” Mater. Sci. Eng., A
,
656
, pp. 130
–141
.10.1016/j.msea.2015.12.0887.
Li
,
L. Y.
,
Jun
,
X.
,
Bin
,
H.
, and
Wang
,
X. L.
, 2020
, “
Microstructure and Mechanical Properties of Welded Joints of L415/316 L Bimetal Composite Pipe Using Post Internal-Welding Process
,” Int. J. Pressure Vessels Piping
,
179
, p. 104026
.10.1016/j.ijpvp.2019.1040268.
Li
,
C. A.
,
Qin
,
G. L.
,
Tang
,
Y. S.
,
Zhang
,
B. G.
,
Lin
,
S. B.
, and
Geng
,
P. H.
, 2020
, “
Microstructures and Mechanical Properties of Stainless Steel Clad Plate Joint With Diverse Filler Metals
,” J. Mater. Res. Technol.
,
9
(2
), pp. 2522
–2534
.10.1016/j.jmrt.2019.12.0839.
Deng
,
D. A.
, and
Hidekazu
,
M.
, 2006
, “
Prediction of Welding Residual Stress in Multi-Pass Butt-Welded Modified 9Cr–1Mo Steel Pipe Considering Phase Transformation Effects
,” Comput. Mater. Sci.
,
37
(3
), pp. 209
–219
.10.1016/j.commatsci.2005.06.01010.
ASTM
, 2009
, “Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
,”
ASTM International
, West Conshohocken, PA, Standard No. E837-08e2A.11.
Li
,
S.
,
Ren
,
S.
,
Zhang
,
Y.
,
Deng
,
D. A.
, and
Hidekazu
,
M.
, 2017
, “
Numerical Investigation of Formation Mechanism of Welding Residual Stress in P92 Steel Multi-Pass Joints
,” J. Mater. Process. Technol.
,
244
, pp. 240
–252
.10.1016/j.jmatprotec.2017.01.03312.
Dong
,
Z. Q.
, and
Zhang
,
J. X.
, 2018
, “
Three-Dimensional Finite Element Analysis of Residual Stresses in Circumferential Welds of 2205/X65 Bimetallic Pipe
,” Int. J. Adv. Manuf. Technol.
,
96
(5–8
), pp. 2841
–2851
.10.1007/s00170-018-1698-213.
Zhou
,
G. T.
,
Li
,
H. B.
,
Fu
,
K.
,
Liu
,
F.
, and
Chen
,
M. F.
, 2019
, “
Numerical Simulation of Temperature Field of B1500HS Steel/Q235 Laser Tailored Blanks by External Thermal Action
,” Procedia Manuf.
,
37
, pp. 402
–409
.10.1016/j.promfg.2019.12.06614.
Deng
,
D. A.
, and
Kiyoshima
,
S.
, 2010
, “
FEM Prediction of Welding Residual Stresses in a SUS304 Girth-Welded Pipe With Emphasis on Stress Distribution Near Weld Start/End Location
,” Comput. Mater. Sci.
,
50
(2
), pp. 612
–621
.10.1016/j.commatsci.2010.09.02515.
Sun
,
J. M.
,
Liu
,
X. Z.
,
Tong
,
Y. G.
, and
Deng
,
D. A.
, 2014
, “
A Comparative Study on Welding Temperature Fields, Residual Stress Distributions and Deformations Induced by Laser Beam Welding and CO2 Gas Arc Welding
,” Mater. Des.
,
63
(2
), pp. 519
–530
.10.1016/j.matdes.2014.06.05716.
Goldak
,
J.
, 1985
, “
A Double Ellipsoid Finite Element Model for Welding Heat Sources
,” IIW Doc.,
212, p. 603.17.
Lippold
,
J. C.
, and
Kotecki
,
D. J.
, 2005
, Welding Metallurgy and Weldability of Stainless Steels
,
Wiley,
Hoboken, NJ.18.
Di
,
X. J.
,
Zhong
,
Z. T.
,
Deng
,
C. Y.
,
Wang
,
D. P.
, and
Guo
,
X. J.
, 2016
, “
Microstructural Evolution of Transition Zone of Clad X70 With Duplex Stainless Steel
,” Mater. Des.
,
95
, pp. 231
–236
.10.1016/j.matdes.2016.01.08719.
Leblond
,
J. B.
, and
Devaux
,
J. C.
, 1984
, “
A New Kinetic Model for Anisothermal Metallurgical Transformations in Steels Including Effect of Austenite Grain Size
,” Acta Metall.
,
32
(1
), pp. 137
–146
.10.1016/0001-6160(84)90211-620.
Koistinen
,
D. P.
, and
Marburger
,
R. E.
, 1959
, “
A General Equation Prescribing the Extent of the Austenite-Martensite Transformation in Pure Iron-Carbon Alloys and Plain Carbon Steels
,” Acta Metall.
,
7
(1
), pp. 59
–60
.10.1016/0001-6160(59)90170-121.
Ren
,
S. D.
,
Li
,
S.
,
Wang
,
Y. F.
,
Deng
,
D. A.
, and
Ma
,
N. S.
, 2019
, “
Predicting Welding Residual Stress of a Multi-Pass P92 Steel Butt-Welded Joint With Consideration of Phase Transformation and Tempering Effect
,” J. Mater. Eng. Perform.
,
28
, pp. 7542
–7463
.10.1007/s11665-019-04470-922.
Ye
,
Y. H.
,
Cai
,
J. P.
,
Jiang
,
X. H.
,
Dai
,
D. P.
, and
Deng
,
D. A.
, 2015
, “
Influence of Groove Type on Welding-Induced Residual Stress, Deformation and Width of Sensitization Region in a SUS304 Steel Butt Welded Joint
,” Adv. Eng. Software
,
86
, pp. 39
–48
.10.1016/j.advengsoft.2015.04.00123.
Jiang
,
W. C.
,
Wang
,
B. Y.
,
Gong
,
J. M.
, and
Tu
,
S. T.
, 2011
, “
Finite Element Analysis of the Effect of Welding Heat Input and Layer Number on Residual Stress in Repair Welds for a Stainless Steel Clad Plate
,” Mater. Des.
,
32
(5
), pp. 2851
–2857
.10.1016/j.matdes.2010.12.03724.
Zhu
,
M.
,
Wu
,
W.
,
Qian
,
W. F.
,
Xia
,
L. Q.
,
Zhang
,
Y. S.
, and
Wang
,
B. S.
, 2021
, “
A Brief Review on Welding of Stainless Steel Clad Plates: Issues and Future Perspectives
,” Int. J. Adv. Manuf. Technol.
,
115
(1–2
), pp. 49
–59
.10.1007/s00170-021-07218-9Copyright © 2022 by ASME
You do not currently have access to this content.
