Abstract
The theoretical foundation of the unified theory of tubesheet (TS) design for fixed TS heat exchangers (HEXs), floating head, and U-tube HEXs are presented in Part I, in which only the most important equations are addressed to show the main points of the theory. The equations, conclusions, and other aspects referenced in Part I are presented or proved in this paper as Part II to supplement the theoretical analysis in Part I.
Issue Section:
Design and Analysis
References
1.
Zhu
,
Hong-Song
, 2021
, “
The Unified Theory of Tubesheet Design—Part I: Theoretical Foundation
,” ASME J. Pressure Vessel Technol.,
epub.10.1115/1.40517952.
Zhu
,
Hong-Song
, 2021
, “
The Unified Theory of Tubesheet Design—Part III: Comparison With ASME Method and Case Study
,” ASME J. Pressure Vessel Technol.
, epub.10.1115/1.40517973.
Zhu
,
H.
, 2018
, “
A Unified Analytical Method of Stress Analysis for Tubesheet- Part I: Theoretical Foundation
,” ASME J. Pressure Vessel Technol.
,
140
(1
), p. 011203
.10.1115/1.40385164.
Gardner
,
K. A.
, 1948
, “
Heat Exchanger Tubesheet Design
,” ASME J. Appl. Mech.
,
15
(4
), pp. 377
–385
.10.1115/1.40098615.
Gardner
,
K. A.
, “
Heat-Exchanger Tube-Sheet Design—3. U-Tube and Bayonet-Tube Sheets
,” ASME J. Appl. Mech.
, 1960
,
27
(1
), pp. 25
–33
.10.1115/1.36439306.
Barron
,
R. F.
, and
Barron
,
B. R.
, 2011
, Theory of Thermal Stresses
,
Wiley
, New York, p. 432
.7.
Wang
,
C. M.
,
Wang
,
C. Y.
, and
Reddy
,
J. N.
, 2005
, Exact Solutions for Buckling of Structural Member
,
CRC Press LLC
,
New York
.8.
Osweiller
,
F.
, 1989
, “
Evolution and Synthesis of the Effective Elastic Constants Concept for the Design of Tubesheets
,” ASME J. Pressure Vessel Technol.
,
111
(3
), pp. 209
–217
.10.1115/1.32656669.
ASME Code
, 2019
, Section VIII- Division 1-2019
,
ASME
,
New York
.10.
Sampson
, 1960
, “
Photoelastic Analysis in Perforated Material Subject to Tension or Bending
,” Bettis Technical Review, Pittsburgh, PA, Report No. WAPD BT 18.11.
Meijers
,
P.
, and
van der Heijen
,
A. M. A.
, 1980
, “
Refined Theory for Bending of Perforated Plates
,” Laboratorium voor technische mechanica
,
Delft University of Technology
, Delft, The Netherlands, Report No. 198109.Copyright © 2022 by ASME
You do not currently have access to this content.
