Abstract

Rupture disk safety device plays an important role as the last safety barrier to prevent catastrophic overpressure in chemical vessels. In this article, a burst pressure calculation method of ultrahigh pressure rupture disk is presented based on “Levy–Mises Increment Theory” and “Torque Theory.” Besides, the calculation result is verified reasonable by numerical simulation and experiment. Thus, the calculation formula can be applied in the design of ultrahigh pressure rupture disk.

References

References
1.
Yu
,
J.
,
Xu
,
Z.
, and
Ding
,
X.
,
2007
, “
Bursting Disc Safety Devices
,” The Standardization Administration of China, Beijing, Report No. GB 567–2012.
2.
ASME
,
2007
, “
Pressure Vessels—Division 1
,” The American Society of Mechanical Engineers,
New York
,
ASME Paper No. VIII-1-2007
.10.1115/VIII-1-2007
3.
ISO
,
2003
, “
Bursting Disc Safety Devices
,” European Committee for Standardization,
Brussels, Belgium
,
ISO 4126-2-2003
.https://www.iso.org/standard/34605.html
4.
Jeong
,
J. Y.
,
Lee
,
J.
,
Yeom
,
S.
,
Choi
,
W.
,
Kim
,
T. G.
,
Hong
,
S. C.
,
Ryu
,
M.
,
Kim
,
H.
, and
Lee
,
S. B.
,
2012
, “
A Study on the Grooving Process of a Cross-Scored Rupture Disc
,”
Int. J. Precis. Eng. Manuf.
,
13
(
2
), pp.
219
227
. 10.1007/s12541-012-0027-1
5.
Cooper
,
M. A.
,
Skaggs
,
M. N.
, and
Reu
,
P. L.
,
2016
, “
High-Speed Stereomicroscope Digital Image Correlation of Rupture Disc Behavior
,”
Advancement of Optical Methods in Experimental Mechanics
, Vol.
3
,
Springer International Publishing
, Berlin.
6.
Sudha
,
C.
,
Parameswaran
,
P.
,
Kishore
,
S.
,
Murthy
,
C. M.
,
Rajan
,
M.
,
Vijayalakshmi
,
M.
, and
Raghunathan
,
V. S.
,
2008
, “
Microstructure and Deformation Mode of a Stainless Steel Rupture Disc Exposed to Sodium–Water Reaction
,”
Mater. Charact.
,
59
(
8
), pp.
1088
1095
.10.1016/j.matchar.2007.08.030
7.
Timoshenko
,
S.
, and
Woinowsky
,
K. S.
,
1980
,
Theory of Plates and Shells
,
McGraw-Hill
,
New York
.
8.
Hu
,
Z.
,
Yang
,
X.
, and
Wu
,
Z.
,
1993
, “
A Study of Bursting Characteristics on Hole-Slot Flat Rupture Discs
,”
J. Engg. Technol.
,
2
, pp.
46
50
.https://en.cnki.com.cn/Article_en/CJFDTOTAL-NCDG199302003.htm
9.
Yu
,
J.
,
1994
, “
Experimental Investigation for the Characteristics of Rupture of the Scored Tension Loaded Discs
,”
J. Pressure Vessel Technol.
,
11
(
6
), pp.
494
497
.
10.
Gu
,
X.
, and
Yang
,
X.
,
1998
, “
Research on the Blasting Performance of Circular Slotted Flat Plate Rupture Disc
,”
Chem. Equip. Technol.
,
19
(
5
), pp.
31
34
.
11.
Tang
,
J. Q.
,
Geng
,
L. Y.
, and
Gong
,
J. M.
,
2019
, “
Analysis on Bursting of Rupture Disc Made by Inconel 600 Alloy
,”
Key Eng. Mater.
,
795
, pp.
290
295
.10.4028/www.scientific.net/KEM.795.290
12.
Hill
,
R. A.
,
1950
, “
Theory of the Plastic Bulging of a Metal Diaphragm by Lateral Pressure
,”
Philos. Mag.
,
41
, pp.
1133
1142
.10.1080/14786445008561154
13.
Lake
,
G. F.
, and
Inglis
,
N. P.
,
1939
, “
The Design and Manufacture of Bursting Discs
,”
Proc. Inst. Mech. Eng.
,
142
(
1
), pp.
365
378
.10.1243/PIME_PROC_1939_142_026_02
14.
Kanazawa
,
T.
, and
Machkia
,
S.
,
1967
, “
Plastic Deformation and Rupture of Thin Circular Plate Under Lateral Pressure
,”
Proc. Jap. Cong Mater. Res.
,
11
, pp.
180
184
.
15.
Bestehorn
,
R.
,
1947
, “
Rupture Disks and Safety Membranes
,”
Die Technik
,
2
, pp.
93
95
.
16.
Well
,
N. A.
,
1959
, “
Rupture Characteristics of Safety Diaphragms
,”
J. Appl. Mech.
,
12
, pp.
621
624
.
17.
Jin
,
J.
,
1961
, “
Study on Ultimate Strength (Bursting Pressure) and Deformation of Explosion - Proof Film
,”
J. Dalian Inst. Technol.
,
3
, pp.
145
169
.
18.
Wang
,
J.
, and
Shi
,
P.
,
2003
, “
Analysis of Large Plastic Deformation and Bursting Pressure of Arch Bursting Disc
,”
China Acad. Eng. Phys.
, 1, pp.
137
138
.
19.
Fu
,
J.
,
Lin
,
Y.
, and
Yang
,
J.
,
2010
, “
Numerical Simulation for Forming and Bursting of Tensile Rupture Disc
,”
Pressure Vessel Technol.
,
27
(
4
), pp.
5
8
.
20.
Gu
,
L.
,
Hui
,
H.
, and
Li
,
P.
,
2009
, “
Numerical Study on Bursting Pressure of Rupture Disc
,”
Chinese Mechanical Society 2009 Academic Conference
,
Zhengzhou, China
, Vol.
1
, pp.
154
155
.
21.
The Standardization Administration of China,
1999
, “
Bursting Disc Safety Devices
,” The Standardization Administration of China,
Beijing, China
, Report No. GB 567-1999.
You do not currently have access to this content.