Given the increasing use of composite materials in various industries, oil and gas industry also requires that more attention should be paid to these materials. Furthermore, due to variation in choice of materials, the materials needed for the mechanical strength, resistance in critical situations such as fire, costs and other priorities of the analysis carried out on them and the most optimal for achieving certain goals, are introduced. In this study, we will try to introduce appropriate choice for use in the natural gas transmission composite pipelines. Following a 4-layered filament-wound (FW) composite pipe will consider an offer our analyses under internal pressure. The analyses’ results will be calculated for different combinations of angles 15 deg, 30 deg, 45 deg, 55 deg, 60 deg, 75 deg, and 80 deg. Finally, we will compare the calculated values and the optimal angle will be gained by using the Approximation methods. It is explained that this layering is as the symmetrical.

References

References
1.
Mohitpour
,
M.
,
Golshan
,
H.
, and
Murray
A.
,
2007
,
Pipeline Design and Construction: A Practical Approach
,
3rd ed.
, ASME Order number: 802574,
New York.
2.
Laney
,
P.
,
2002
,
Use of Composite Pipe Materials in the Transportation of Natural Gas
, Idaho International Engineering and Environmental Laboratory, Bechtel BWXT Idaho, LLC.
3.
Akkus
,
N.
, and
Kawahara
,
M.
,
2000
, “
Bending Behaviors of Thin Composite Pipes With Reinforcing Nodes
,”
Mater. Sci. Res. Int.
,
6
, pp.
131
135
.
4.
Alderson
,
K. L.
, and
Evans
,
K. E.
,
1992
, “
Failure Mechanics During the Transverse Loading of Filament-Wound Pipes Under Static and Low Velocity Impact Conditions
,”
Composites
,
23
, pp.
167
173
.10.1016/0010-4361(92)90437-Y
5.
Smerdov
,
A. A.
,
2000
, “
A Computational Study in Optimum Formations of Optimization Problems on Laminated Cylindrical Shells for Buckling: I. Shells Under Axial Compression
,”
Compos. Sci. Technol.
,
60
, pp.
2057
2066
.10.1016/S0266-3538(00)00102-0
6.
Xia
,
M.
,
Takayanagi
,
H.
, and
Kemmochi
,
K.
,
2001
, “
Analysis of Multi-Layered Filament-Wound Composite Pipes Under Internal Pressure
,”
Compos. Struct.
,
53
, pp.
483
491
.10.1016/S0263-8223(01)00061-7
7.
Klosner
,
J. M.
, and
Kempner
,
J.
,
1966
, “
Comparison of Elasticity and Shell Theory Solutions
,”
AIAA J.
,
4
(
3
), pp.
467
480
.10.2514/3.3460
8.
Lekhnitskii
,
S. G.
,
1981
,
Theory of Elasticity of an Anisotropic Body
,
MIR Publishers
,
Moskow
.
9.
Wild
,
P. M.
, and
Vickers
,
G. W.
,
1997
, “
Analysis of Filament-Wound Cylindrical Hells Under Combined Centrifugal Pressure and Axial Loading
,”
Composites, Part A
,
28
, pp.
47
55
.10.1016/S1359-835X(96)00093-0
10.
Wahab
,
M. A.
,
Alam
,
M. S.
,
Pang
,
S. S.
,
Peck
,
J. A.
, and
Jones
,
R. A.
,
2007
, “
Stress Analysis of Non-Convetional Composite Pipes
,”
Compos. Struct.
,
79
, pp.
125
132
.10.1016/j.compstruct.2005.11.054
11.
Bakaiyan
,
H.
,
Hosseini
,
H.
, and
Ameri
,
E.
,
2009
, “
Analysis of Multi-Layerd Filament-Wound Composite Pipes Under Combined Internal Pressure and Thermomechanical Loading With Thermal Variations
,”
Compos. Struct.
,
88
, pp.
532
541
.10.1016/j.compstruct.2008.05.017
12.
Ansari
,
R.
,
Alisafaei
,
F.
, and
Ghaedi
,
P.
,
2010
, “
Dynamic Analysis of Multi-Layerd Filament-Wound Compositepipes Subjected to Cyclic Internal Pressure and Cyclic Temperature
,”
Compos. Struct.
,
92
, pp.
1100
1109
.10.1016/j.compstruct.2009.09.058
13.
Mouritz
,
A. P.
, and
Gibson
,
A. G.
,
2006
,
Fire Properties of Polymer Composite Materials
,
Springer
,
New York.
14.
Fanucci
,
J. P.
,
1987
, “
Thermal Response of Radiantly Heated Kevlar and Graphite/Epoxy Composites
,”
J. Compos. Mater.
,
21
, pp.
129
139
.10.1177/002199838702100204
15.
Eshraghi
,
M. R.
,
2003
,
Analysis of Various Cracks and Provide a Suitable Layer Arrangement Using the Integral J Methods
,
Tehran University
,
37
(
1
), pp.
85
95
.
You do not currently have access to this content.